Question about 2006 Hyundai Sonata

1 Answer

How do i remove front wheel studs on sonata 2006

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

You can't remove the wheel studs totally out of the disc. It depends on how it is fitted.

Remove the wheel and check the brake disc. you can find the studs may be press fitted or welded to the brake to hold it in position & not to rotate when we tighten the bolts. Better approach nearest dealer to check it out and fix it

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken wheel stud right rear wheel with drum brakes on 2006 dodge caravan. Cant get the new stud to go in. I dont have enough room for the stud to go in. Do i need to remove the wheel bearing? What will be...


To remove the broken stud use a punch and drive it out with a hammer back towards the backing plate. BY turning the axle around you will find a position or you may have to remove a brake shoe to help with the installation of the new stud. When you have it in place use larger nuts and pull it into place with the stud nut.. You may not be able to simply put the stud straight in but may have to start a bit of an angle and turn the axle to allow the stud to feed in.

Sep 01, 2013 | 2006 Dodge Grand Caravan

1 Answer

Replacing lug studs on the left front wheel of a 2006 ford f250


now are u talkin about the lugs or the wheel studs?? the lugs are easily replaced but the studs will be harder u have to total tear down the whole tire arrangement to pop the thing holding the studs on the pop them out with a hammer :) hope this helps

Mar 26, 2010 | 2006 Ford F-250 Super Duty

1 Answer

Wheel stud removal, (front)


usally u bang it firt with a hammer then u have to get a special tool from your aouto part store (u can rent it) and then just take them off

Feb 08, 2010 | 2006 Hyundai Sonata

1 Answer

Front wheel stud replacement for a 2006 Hyundai Sonata GL.


grind a flat spot on the round head of the new stud this should give enough clearance to install it. don't pull the hub this will damage the bearing.

Oct 24, 2009 | 2006 Hyundai Sonata

1 Answer

How to replace front wheel bearing 2009 Sonata


No way ,its a strip the the whole hub unit off and there is a circlip coming in from the back ,which is the way the bearing is pushed out ,NO HAMMERS

Oct 23, 2009 | 2006 Hyundai Sonata

1 Answer

How can I replace the front wheel studs on a Hyundai sonata 2003?


hi if you look at the new stids you are going to fit? you will see they are splined on the inner side so with wheel off you tap the old stud/s backwards from the hub then fit new stud/s from the rear ensuring located on splines then you can draw fully home into hub using w/nut or another nut same thread ? if your cars nuts are not open ended ?

Oct 03, 2009 | 2007 Hyundai Sonata Limited Sedan

2 Answers

Need to replace wheel stud on hyundai sonata, how?


have a 2005 hyudai tucson can't remove the front studs even though we pulled off the brakes and caliper but still not enough room to put in new studs and i can't dissasemble it any further

Aug 15, 2009 | 2002 Hyundai XG350

1 Answer

I need to remove front r/side studs on 2005 hyundai elentra 4 dsd?


dear friend-replacing the stud is a fairly intensive job,the hub must be removed,so you might have to replace the wheel bearing,you will need special tools to attemp this job.

Jul 12, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

REPLACING FRONT HUB STUDS FOR A 98 HONDA PRELUDE


To remove that hub you will destroy the bearing. Because you have to remove it with a slide hammer. It is not necessary to remove the hub to change the studs. Remove the caliper, caliper bridge and rotor. Using a hammer simply knock out the stud or studs you want to replace. Put new stud in and using a sleeve that has a bigger diameter than the stud (I use a big nut, like the one on the axle) put big nut over stud and screw lug nut on stud and tighten until head of stud is flush with hub. Re-install rotor, caliper bridge and caliper. Hope this helps.

May 19, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Replacing rear wheel bearings on 1999 hyundai sonata


  1. for drum brakes with sealed hub(all one piece) remove lug nuts and wheel.
  2. spray penetrating oil around studs if there is a big phillips head screw visible remove it with impact driver/if not use big ballpeen hammer ,tap on flat of drum near studs(becareful not to hit them) until drum loosens(your creating a shockwave to loosen rust)
  3. once drum is off there are 4-bolts coming in from behind backing plate, remove them then hub should be able to be removed w/a little persuation from hammer.
with out sealed hub ,
  1. remove wheel
  2. remove dust cap,cotterpin,star washer(if equipped) do not re use cotter pin
  3. remove nut then washer, wiggle brake drum and front bearing will come out.
  4. put nut on shaft tighten 2-3 turns grab drum by sides and pull towards you this should remove drum leaving inner bearing/seal on shaft
  5. to replace reverse procedure making sure to pack new bearings w/grease(take drum and use long punch to remove bearing races, use race/seal installer to install new races
with disk brakes

  1. remove wheel
  2. remove caliper/bracket
  3. remove rotor
  4. remove 4-bolts from behind,tap old hub out
  5. reverse procedure



Jul 19, 2008 | 1999 Hyundai Sonata

Not finding what you are looking for?
2006 Hyundai Sonata Logo

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...