Question about 2001 Mitsubishi Eclipse

1 Answer

Cant get fly wheel bolts off \r\n2001 eclipes

Cant get fly wheel bolts off 2001 eclipes

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 523 Answers

I'd spray spray down with a good penetrating oil, let set for 24 hours or so, then using a hammer hit the bolt on the head (carefull of the fly wheel) then you may want to actually try to ever-so slightly tighten the bolts then go back and try to remove.

I hope this may have assisted,
Tom

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

NEED TORQUE SPECS FOR BOLTING FLY WHEEL ON 2001 TOYOTA HI LUX UTE,PETROL 2 WHEEL DRIVE, 2.7LT MODEL # HILUOOJ


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Nov 05, 2016 | Toyota Cars & Trucks

1 Answer

Fly wheel torque for fiat siena 1,2 2001


Flywheel bolts (always use new bolts)
15Nm / 11 lbf/ft
Then a further 40 degrees of bolt head rotation..

Jun 18, 2016 | Fiat Cars & Trucks

1 Answer

Flywheel or something grings against the starter when clutch is engaged


There is no way the ring gear will hit the starter pinion unless the fly wheel bolts on the crank shaft or loose allowing the flywheel to run out of true. If you have had clutch/ rear seal work done lately the fly wheel will only fit in one position and if that was ignored at some time then the fly wheel will run out and touch the starter pinion.. I would also check the adjustment on the starter pinion as it has to be set by the lever pivot to a correct distance or it will touch the teeth of the ring gear

Jul 28, 2013 | 2001 Ford Escort ZX2

1 Answer

I am tring to fix my fly wheel I think it's the fly wheel any ways I think there is a bolt loss where is the dam thing on this and anyways i just need a web site to be able to find it and how to take it...


Perhaps we are thinking of something completely different to each other. The flywheel sits slap bang between the engine and the gearbox and either, usually the gearbox, has to be removed to gain access to the flywheel. Here is a picture of what goes up to make up the flywheel and clutch assemblies, the flywheel is the part on the left and is bolted to the crankshaft through the six holes near the middle. Come back to me if you need anymore clarification.

images?q=tbn:and9gcsrvbgx14s0yhqqthg-bzqlsoqml2ols1fwh1yqkzcjco_gofjgy7v7qyu0

Apr 14, 2011 | 2001 Ford Focus

1 Answer

How do I install a starter on a 2001 dodge caravan starter?


Lift up the front of your car. Disconnect the (+) cable of the battery. The starter is located in front under vehicle with cylindrical shape. Remove the cable of the starter and solenoid. Remove two bolts that secure starter to engine. Pull the starter to disengage the pinion from the fly wheel.

Oct 13, 2010 | 2001 Dodge Grand Caravan

2 Answers

Cant get fly wheel off . Droped trans & have fly wheel exposed...6 bolts, And they wont come off.


Soak in penetrating oil and remove bolts using air line. If no access to air tools then use breaker bar with constant pressure (no not bounce)

If no joy then you wheel need to heat the flywheel - if you have to do this replace the rear main seal aswel.

Regards

Lloyd Six

Apr 30, 2010 | 1986 Ford F150 SuperCab

Not finding what you are looking for?
2001 Mitsubishi Eclipse Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...