Question about 2002 Audi A4

1 Answer

The 12v accessorie plug is not working? I have checked the fuse, whats the next step?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 666 Answers

Check Power and ground, This can be done with a test light, If there both present replace the plug

Posted on Jun 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 Isuzu npr has no 12v to heater relay in order to apply voltage to heater system. where does this 12v come from ?


accessories fuse check this.
check heater switch - see if 12v at heater switch
Check if 12v applied to relay coil to switch it

Nov 27, 2016 | Isuzu Cars & Trucks

1 Answer

Is there a fuse for power windows?


According with the Ford Owners Manual (page 226 and next) I suggest to check the next locations:
- Battery Junction Box fuse # 6-60AMP will feed Central Junction Box ( under driver side)
- the inline circuit breaker #47-30AMP, through the Accessory Delay Relay, powered by fuse #17-15AMP to the Window Control Circuit.

Check the fuses, and for 12v at the points. Then check for 12v at the driver side door switch pannel.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day

Dec 19, 2011 | 2002 Ford Explorer

1 Answer

My blower stopped working I replaced the resistor and it still doesn't work! And I don't wanna have to buy a blower if its not the problem


Hi Stickboy.
What you could do to determine if the problem is a defective blover is to supply the blower with 12V directly. There must be a connector somewhere where you can disconnect the blower from the electrical system. In the connector you will normally see 2 wires - red & black. Connect 12V to the red wire and ground to the black wire. If the blower is working by this direct supply the failure must be looked for somewhere else.

Assuming the blower is OK - the next step is to measure if 12V is coming to the Blower resistor. If no a various reasons could be the problem.
I assume that you have checked the fuses already. If no - it is a good idea to check.

Regards

Feb 02, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

The heater fan just stopped...


Check fuse #14(10amp) located in fuse box under driver steering wheel behind the lower dash cover.
Check fuse#12(40amp) located in fuse box under hood.
Replace fuse(s) if any are blow.

If fuse are good.Check blower and transisto next.
Do steps 1-3 with turn key on
1. Unplug connector and check for 12v at the blue/white wire at the blower motor(2-NAT)
-if there's no voltage you might have a bad relay or open in the wire
-if there's about 12v, go to step 2
2.Plug connector for blower motor and unplug connector for blower transistor(4-NAT). Take a jumper wire and jump the blue/black wire to body ground.
-if blower does not run, replace blower motor
-if blower motor runs, go to step 3
3.check the black wire at(4-NAT) for good ground.
-if you have good ground, then replace blower motor transistor.
good luck

k42282_34.jpg

Jan 18, 2011 | 2004 Honda Element

1 Answer

12v outlet fuses keep blowing.


Faulty reciever ,,, Worth checking the plug assy for internal damage . Check that the sat receiver is within the power capabilities of the vehicles acessory plugs < 10amp .

Dec 23, 2009 | 2004 Ford Ranger

1 Answer

Park/Tail lights not working. Brake/signals are


Before going ahead and spending money on a new module, test it first. The module is located under the steering column. You'll find a Brown wire on one of the connectors (i just looked at a wire diagram). Do no disconnect anything. Back probe the brown wire, which is the power feed to your park lights. With the lights off, there should be 0 volts on you voltmeter. Turn the park lamps on, There should be 12V. If there is not 12V, disconnect the connector and try to check voltage at the pin that feeds to the brown wire, if still not 12V, replace the module. If you do get 12V, then module is ok, find where the 12v is being dropped before making it to the lamps.

Aug 09, 2009 | 1999 Lincoln Town Car

1 Answer

12v accessory plug in


the first step is to check the fuse it should be labeled as CIG or AUX
if fuse is not open (blown) check for corrosion and power at ether end of the terminal (where the fuse goes in) using a 12V test light. If it does not light then the problem is between the fuse panel and battery, but if it lights check the power side of plug in (the sides are the ground and the circle in the bottom is the positive) with the test light. If there is no light that means a disconnected or cut wire on the positive side, but if it does light then there is a cut or disconnected wire on the negative side ether one may need to be further investigated and repaired.
also remove panel and check to see if the wires have been unplugged from the end of the plug in

Oct 08, 2008 | 1994 GMC Jimmy

2 Answers

Front and center console 12v accessory power outlets not working


look under the drivers rear seat for the rear fuse block it will be under a black box right there

Aug 25, 2008 | 2003 Chevrolet TrailBlazer

Not finding what you are looking for?
2002 Audi A4 Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...