Question about 1999 Ford Explorer

1 Answer

A/C HEATER 99 FORD EXPLORER

Everything works great but when you accelerate it just dies right out.Let off the gas and she blows hard again

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

You have a vacuum leak either under the dash that works the air conditioner or under the hood.

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 Ford Explorer engine tries to start and dies what is the problem ?


Its hard to say with so little details, it can be a number of things, no gas? Bad fuel pump? No spark? Bad fuse? Bad ignition? And it goes on and on... Is the check engine light on, if it is check the code

Mar 23, 2017 | 1999 Ford Explorer

1 Answer

My 99 ford explorer won't start unless I hold the


replace your idle air control valve, common on fords

Oct 19, 2014 | 1999 Ford Explorer

1 Answer

99 explorer ac blowing out defrost vents


did you hook everything up right? Im not doubting your work but sometims it happens

Jul 29, 2012 | 1999 Ford Explorer

1 Answer

I have a 99 ford expedition eddie bauer. The heater works great sometimes and other times blows cold. If you turn it off and wait a few seconds and start it again it will work. Truck never over heats or...


You probably have air in the cooling system. These vehicles are sort of hard to bleed it out. I would recommend taking it to a dealership. Or you could take the rad cap off and run it but you will need a large funnel, one that is tight when going into the fill hole on the rad. Warm engine up, the fluid will rise a lot and this is normal. Once the engine is at operating temperature and the thermostat has opened up (grab upper rad hose it will be hot) rev it to 2500 rpm for about 10 seconds then release the gas pedal. This will help get the air out you will see bubbles in the funnel. Do that a few times (4 or 5) then leave it idle for a bit, put the hot air on through the vents it should stay hot if it is then you can put the rad cap back on if it doesn't stay hot you still have air in the system. I do it somewhat like this except I built a special rad cap specifically for the explorers.

Jan 05, 2011 | Ford Expedition Cars & Trucks

1 Answer

My 99 ford explorer cuts out and dies when accelerating in drive


You may have dirty or clogged fuel injectors, may also be problems with the ignition system. Might also check the fuel pressure to make sure the fuel pump is working correctly.

Jan 29, 2010 | 1999 Ford Explorer

2 Answers

91 explorer heater not blowing air


The blower motor is located under the hood on the passengers side next to the hood hinge on the firewall. But, check your blower motor resistor first. The resistor is usually the trouble maker. It is located next to the blower motor. It should have 2 screws holding it onto the heater housing. Also an electrical connector. I sincerely hope that this will get it working again. Best wishes to ya.
Bryon

Jan 26, 2009 | 1991 Ford Explorer

1 Answer

Dies when drive


My 99 Explorer would not run unless you held the pedal to the floor. Found out ford has a recall on their intake gaskets. If you see what the intake gaskets look like you'll wonder how the motor runs at all. I had that prob for 50,000 miles and I changed those gaskets and now it runs like a new ford.

Dec 27, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1999 Ford Explorer Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...