Question about 2003 Ford Taurus

1 Answer

Wouldn't start. Starter was bad. Changed starter and still won't start?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 192 Answers

Will it turn over but not CRANK? The Coil on this year model is famous for going out as is the cam position sensor. If you've tried replacing the starter and are sure you're getting fuel to the injector rail then the next thing to look at is COIL.. a bad Cam Sensor would give you a rough idle, hard start, and CEL. The Coil sits on top of the valve cover and has all 6 spark plug wires running from cylinders to it. Check your local autoparts store for a new coil as the dealer will really charge you big time for one.

Posted on Jun 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO INSTALL STARTER ON A 97 FORD THUNDERBIRD


I'm not sure that your starter is in good condition .You have to pull your starter out from engine .
Ensure the safety dental starter and the engine .
If you find that the dental starter Moving north and right .
You have to replace the starter .
good luck , and let me know .............

Nov 02, 2011 | Cars & Trucks

1 Answer

1966 mustang 289. won't start, jumped across solenoid, started. Replaced solenoid-starter wouldn't disengage, replaced starter, back to square 1, jumping across solenoid to start - whats my...


Ignition problem... No signal from ignition to solenoid...run a starter draw test to confirm starter is ok --- You can run your jump wires to a remote starter button or switch to get around it for now.

I hope this helps.

Sep 22, 2011 | Ford Mustang Cars & Trucks

1 Answer

2000 dodge grand caravan 3.8L. the a/c stopped cooling, the next day the serpentine belt broke so I replaced it. It wouldn't start so I had alternator tested, it was bad, replaced it, still...


sounds to me like a siezed up ac unit.. it would not spin while all other pulleys spin... thus causing the broken belt.. hope that helps you

Aug 03, 2011 | 2000 Dodge Grand Caravan

1 Answer

I have a 97 Crown Vic/w police interceptor....I asked a question several days ago because of issuses I'm having with my car. The car starts sometimes, with no problems. Other times...it won't...


Sounds like its a starter problem,if you can pull the starter off take it to an auto parts store,

there are many locations that have equipment to put a load on the starter, and they will be

able to tell if its bad. once you pull the starter off, if you can check the teeth on the fly wheel,

if there is a dead spot, the starter could spin and not engage the flywheel. I hope it's the

starter. the bendix on the starter the teeth that engage the flywheel could also have dead

spot's. and not engage all the time. good luck!

Jul 27, 2011 | Ford Crown Victoria Cars & Trucks

1 Answer

2000 Chevy s10 manual changed starter still won't start the starter is spinning but the engine won't turn over.


Do you have the correct starter and is it grinding, this sounds like a bad flywheel or wrong starter or even a bad one. look at teeth of flywheel and see if they are damaged. good day

Jun 19, 2011 | 2000 Chevrolet S-10

1 Answer

Hello. My 1997 Chevy Tahoe refuses to start. The problems began with a bad fuel pump. I changed. It worked. The fuel pump died again. I changed it again and it has been working. I parked it for two weeks....


Now you have a good battery & a starter that turns over the motor

Have you cycled the key on & off with a fuel pressure gauge on the
fuel rail?

Do you have a fuel filter that isn't over 3 or 4 years old?

Have you checked for spark while cranking ? Use an old plug on the wires,
if you have ignition wires,don't ground the wire without resistance

If you removed the ducting & MAF Sensor it won't start

Tell us what you checked & exactly how that was done.

Jun 09, 2011 | 1997 Chevrolet Tahoe

1 Answer

I have a 1997 Pontiac Bonneville SE, and the battery may be bad. Though I wouldn't be asking if I thought there was the possibility that the starter is the culprit. what happens is it...


It sounds like it's just a bad battery. If it was the starter, it wouldn't even turn over like you're describing. If a starter goes bad, you typically just a hear a click and it won't even attempt to turn the engine over.

Good Luck!

May 25, 2011 | Pontiac Bonneville Cars & Trucks

1 Answer

I have a 1996 GMC Sierra C1500. I'm totaly new to


A bad fuel pump will not keep the engine from turning over. I would first test your battery and make sure your connections are clean. If that check out I would check your starter and starter relay.

May 10, 2011 | 1996 GMC Sierra

Not finding what you are looking for?
2003 Ford Taurus Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...