Question about 2002 Mazda Tribute

Open Question

My 2002 Mazda Tribute's low-beam headlights won't work.

My 2002 Mazda Tribute's low-beam headlights, both of them, quit functioning. High beams both work fine, but when you select low, they both just go out.

I have suspicions it could be a problem with the actual headlight switch on the steering column, but don't know how to confirm or repair.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Low beams do not work but High beams do

you have to change just the low beam bulb. Ive already changed mine twice in my 06.

Posted on Jan 31, 2009

Ad
  • 1986 Answers

SOURCE: Both low beam headlights stopped working at the

Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse

Posted on Aug 12, 2009

  • 347 Answers

SOURCE: Mazda MPV low beam headlights stopped working.

loose connection, defective relay, loose ground connection.

Posted on Oct 03, 2009

  • 1 Answer

SOURCE: 2004 mazda 3 headlights wont work

i just noticed that my low beams are out and the only thing working is the right front high beam for light so i can see at night. I bought new bulbls and replaced them. I bought new fuse's and replaced them too. i checked the wires to see if i was getting any voltage and the multi-meter only read 1 and now i am so lost i dont know what to do.

Posted on Dec 16, 2009

  • 12 Answers

SOURCE: How do I change the bulb in the low beam headlight

Removing the bulb in a CX7 is a real PITA. If replacing the right bulb, turn the steering wheel all the way to the right, or do the opposite for the left side. (or you can opt to remove the entire wheel on the corresponding side) You'll need to remove 3-4 of the fender well clips with a phillips screwdriver being careful not to break them. Once the screws are removed, pry back the wheel well cover to access the back of the headlamp to change the bulb.

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My headlights on my 1999 mazda b3000 are not working


Does it have separate bulbs for the high beams than it does for the low beams?

Jul 23, 2015 | Mazda Cars & Trucks

1 Answer

High beams work for both lights, 1 low beam does not


Check for power with a test light with the light connected. If you have power then its the ground. If no power then you will need to trace the wire back to find break. As I recall they did have seperate fuse for left and right headlight high & low beam. Also did you get a defective new bulb?

May 31, 2015 | 2006 Mazda Tribute

1 Answer

2005 ford sports trac. How do you get to head


Its not a relay, have your multi function switch checked out

Oct 20, 2014 | 2005 Ford Explorer Sport Trac

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

I am trying to locate the fuse for the headlights on a 2005 mazda tribute


Why are you looking for the fuse? High beams not working? low beams not working? Are neither the high or low beams working? Are you sure the bulbs are not burned out? There are 4 fuses for your headlamp system, which one are you looking for?

Please review this article:
Where's The Fuse?

Aug 28, 2011 | 2005 Mazda Tribute

1 Answer

Have headlight problem 2002 chevy malibu v-6 on the dim side have electria current on both wires to the blub bright beams function normal


if you have power to both headlight plugs for each low and high beam filaments and the ground is good as you say the high beams function normally then you either have bad low beam bulb filaments,poor or dirty connection or you have a daytime running headlight relay on the car and that is the problem with the low beam lights.yes the high beams will work but not low beams if it is the relay.

Mar 04, 2011 | 2002 Chevrolet Malibu

1 Answer

The high beam indicator is on. The low beams don't work.


You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Jun 03, 2010 | 2000 Mazda MPV

1 Answer

How do you adjust the headlights on a 2002 Mazda Miata?


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Jan 04, 2009 | 2002 Mazda Miata

Not finding what you are looking for?
2002 Mazda Tribute Logo

Related Topics:

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...