Question about 1992 Pontiac Grand Am

1 Answer

1992 pontiac grand am 3.3l v-6 how do you put a new serpentine belt on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 516 Answers

Near the top of the belt is a spring-loaded belt tensioner with a pulley attached to it. Using the proper wrench, pry it back and the tension will relax so you will easily remove the belt. Look at how the belt travels across the pulleys first so you know how to put the new belt on. I hope this helps you.

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tensioner belt was replaced on 1992 grand prix but still wont start. troubleshooting needed.


Re check the belt routing.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Feb 07, 2012 | 1992 Pontiac Grand Prix

1 Answer

How do I replace the Airconditioning/power steering belt on a Grand marquis, Mercury(1992)? please show me in a diagram or print somehow


Move the Grand Marquis's serpentine belt tensioner off the serpentine belt with the serpentine belt tool. Pull the belt of the remaining pulleys by hand. Take the belt out of the engine well. Wrap the new belt around the bottom portion of the crankshaft pulley. Follow the belt routing diagram to route the belt over each remaining pulley until only the tensioner remains. Move the Grand Marquis's serpentine belt tensioner aside once more and slip the belt onto the tensioner pulley.Hold the belt in place with one hand while you move the tensioner slowly back into position with the other. Here you can fine the quality AC parts http://www.1airconditioning.com/ac_compresor.htm

Aug 24, 2011 | 1992 Mercury Grand Marquis

1 Answer

(1999 pontiac grand prix 3100 v6) how do I remove and replace my serpentine belt successfully?


Instructions Things You'll Need
  • 3/8-inch drive breaker bar
  • Metric socket kit
  • New serpentine belt
    • 1

      Park the Pontiac in a safe work area and open the hood.

    • 2

      Inspect the top of the black plastic cover that surrounds the fan for the serpentine belt routing diagram. This diagram has the instructions for installing the new serpentine belt around the accessory pulleys.

    • 3

      Inspect the front of the engine and locate the automatic belt tensioner. The tensioner on the 1999 Pontiac model vehicles is located between the alternator and the crankshaft pulley. The tensioner has a pulley on one end with a bolt head in the center of the pulley. Use the bolt head to rotate the tensioner.

    • 4

      Turn the tensioner counterclockwise with the breaker bar and a metric socket. Pull the belt out from under the tensioner pulley with your other hand. Then, slowly let the tensioner retract until it stops.

    • 5

      Pull the belt out of the other remaining pulleys. Then, pull the belt out of the engine bay and lay it on the ground.

    • 6

      Route the new belt around the crankshaft pulley. Then, route the new belt around the other remaining pullleys by using the serpentine belt routing diagram for instructions.

    • 7

      Rotate the tensioner pulley counterclockwise with the breaker bar and socket. Then, slide the new belt under the tensioner pulley. Slowly let the tensioner retract until it stops. The tensioner pulls all of the slack out of the belt and brings the new belt to the proper tension. Remove the breaker bar and socket from the tensioner pulley.

    • 8

      Inspect the new belt to ensure that it is seated inside of all the accessory pulleys as directed by the diagram. Then, crank the engine and allow it to run for about 15 seconds. Turn the engine off. Inspect the belt again once more to ensure that
      the belt is still around each pulley. Close the hood.



May 22, 2011 | 1999 Pontiac Grand Prix

1 Answer

On a 2000 Grand Am the serpentine belt came off... upon inspection it appears that the tension wheel has broken. How can this be replaced?


I had the same problem with my son's 1992 Pontiac Sunbird. The tension wheel for that model was held in place by mounting bolts on the back side of the tension wheel. Simply remove the bolts and install the new tension wheel.

Dec 23, 2009 | 2000 Pontiac Grand Am GT

1 Answer

I need a diagram for serpentine drive belt for a 2004 Grand Prix with a 3800 engine.


2004 PONTIAC GRAND PRIX 3.8 LITRE V6 SERPENTINE BELT

Go to the following web site (copy and post the web address to your browser)
http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/a866a821123f887c862571a5006988df!OpenDocument

There are 2 PDF documents above the photo. The first gives you theRouting guide for the vehicle/engine - 6-24 - on pages 103/104 of the PDF doc and the second document ( Illustration PDF) gives you the belt routing diagram for 6-24.

Hope this gives you what you need.
Cheers
Sean
Voluntary contributor.

Dec 12, 2009 | 2004 Pontiac Grand Prix

3 Answers

Serpentine belt diagram for a 3,3l dodge dynasty with ac


For the 1991 DODGE DYNASTY - V6 3.3L 201ci GAS FI N R , review this informacion:

Belt Routing Diagram
- Multiple Accessory, w/o A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. After 2/27/91)
- Multiple Accessory, w/o A.C. (Mfg. Before 2/27/91)
- Multiple Accessory, w/A.C. (Mfg. Before 2/27/91)
684ce70.jpg


Remove the serpentine belt by using a breakover bar, rachet or serpentine belt removal tool with the correct size socket for the pulley mounting bolt. Rotate tensioner arm to release tension. Remove the belt.

Hope helped with this (remember rated this help) Good luck.

Nov 12, 2009 | 1991 Dodge Dynasty

1 Answer

How difficult is it to change the serpentine belt tension assembly on the 1995 pontiac grand am with the V6? Does the engine need to raised out of the vehicle?


the engine does not have to be raised
.you need a serpentine tool.it is a flat bar with hex cut outs for the pulley.or a shallow socket and ratchet.
the tensioner need to be slack to put on the new belt. draw a diagram of the belt routing of the old belt. the crankshaft is easier put on from the bottom.there is not alot of space and the belt has to be twisted sideways past a few pulleys.

Oct 23, 2009 | 1997 Pontiac Grand Am

2 Answers

Changing serpentine belt 3.8 2007 pontiac grand


  • Make sure your new belt exactly matches the old belt demensions
  • Take a breaker bar or big rachet & release the tension on the automatic tensioner; very slowly
  • Loop the old belt around the pulleys & fan
  • Install new

Oct 17, 2009 | 2007 Pontiac Grand Prix GXP Sedan

2 Answers

1 have a 1992 pontiac grand prix, 3.4L and i need to change out the power steering pump. since the pump is on top of the engine, it should be simple. How do i take off the serpentine belt?


There is a spring laded tensioner on the left (as you look at the belts) there should be a 9/16" boss that a wrench fits on, push or pull and it will release the tension to remove the belt.

Aug 02, 2009 | 1992 Pontiac Grand Prix

Not finding what you are looking for?
1992 Pontiac Grand Am Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...