Question about 1995 Dodge Caravan

1 Answer

Removing the dash so i can remove the factory radio in 1995 dodge minivan

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 2,100 Answers

Do not do it!!!! The dash basically does not come out. Everything on it comes through it. You can get the radio out without removing the dash, I don't know how but it does. I just took the dash out of a junk truck just for the wiring harness, You gotta be kidding me. I knew it could never go back in and be right. I suppose it could but t would take weeks. The steering wheel has to come off, there are bolts inside the vents holding it on, A million switches and wires, and the ac unit is a bunch of unforgiving cables that never get hooked back up right. If you want to save some time and trouble, just go to a store like best buy where they install radios, they can do it in 10 minutes, where it would take you 3 hours just to figure it out. Hope this helps.

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the stereo on a 1996 mazda mpv


Mazda MPV Dash Trim Removal, Stereo Removal - Auto ...

? 3:38
https://www.youtube.com/watch?v=REoTeVM2S-o
Jul 1, 2013 - Uploaded by Robert DIY
Dash trim removal: 5 minutes. This video will show you how toremove the dash trim piece on the Mazda ...

[PDF]MAZDA 1996-UP MPV - Scosche

www.scosche.com/media/guides/ma381.pdf
164. 1996-UP MAZDA MPV. MINIVAN. RADIO REMOVAL USING SCOSCHE DT-1 TOOLS . FRONT DOOR PANEL. FRONT AND REAR DOOR 61/2" 3-HOLE.

DIY Mazda Car Radio and Speaker Removal, How to Remove

www.carstereoremoval.com/htm/stereoremovalMazda.htm
'96-99* Car Stereo Removal · Ford Stereo Removal Tools Stereo Removal Tools. How To Install and Remove Mazda MPV Van Car Radio and Speaker, '89-95*

Jan 31, 2016 | Mazda Cars & Trucks

1 Answer

Factory stereo not working and needs replaced. how does dash come apart to do this


REMOVAL

  1. Disconnect and isolate the battery negative cable.
  2. Remove cup holder.
  3. Remove trim panel above cupholder by pulling straight out.
  4. Remove center instrument panel trim panel.
  5. Remove screws holding radio to instrument panel.
  6. Pull radio rearward to gain access to the back of radio (RADIO). CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.
  7. Disconnect the antenna cable by pulling the locking antenna connector away from the radio (ANTENNA TO RADIO).
  8. Disconnect bolt holding ground strap to the radio (if equipped).
  9. Disconnect the wire connectors from the back of the radio.

Nov 19, 2013 | 2002 Dodge Grand Caravan

1 Answer

Neither book I own(owners manual or haynes) doesn't have the radio wiring diagram?


Remove factory radio from upper dash an center dash. Follow connectors to main receiver it will be underneath on right side of steering wheel, looks like silver box that's where your harness will be

Jun 28, 2012 | 1995 GMC Sierra C1500

1 Answer

How do you remove the factory radio from a 97 s 10 pickup


Here is a link that should help you remove the factory unit. There is no instructions for the 1995-1998 but the 1999-2000 have the same mounting brackets, the only difference id the trim and radio shape. The 1995-1998 are square as to the 1999-2000 have rounded edges.

Thank you time and take extra care when moving the dash trim up and over the hazard light switch on top of the steering unit.

Thank you for using fixya and good luck .
http://www.installdr.com/InstallDocs/GM/S-10.html

Jun 19, 2010 | 1997 Chevrolet S-10 Pickup

1 Answer

Car radio removal


remove dash face plate around radio there will be small screws or studs with nuts around the sides of radio attached to a mounting plate. Unhook wire harness on radio and pull from dash

Mar 02, 2010 | 1995 Geo Prizm

2 Answers

Replacing radio, need to know how to remove dash


dash is ismply snapped into place. There are only plugs in teh dash if your model is a 4wd. It's easiest to tilt the steering wheel all the eay down for removal of the dash bezel. Once the bezel is removed there are only two screws holding in the factory radio.

Dec 14, 2009 | 2001 Dodge Durango

1 Answer

How to take dash apart to get to the radio


The moulding around the radio removes quite easily. Remove the ashtray, 2 screws. Remove the slideout cupholder. 2 screws. The moulding around the radio pulls straight out. It has slideout or popout clips. Once that is removed, unscrew the 2 10 mm or philips screws that hold the radio in. Slide out the radio, another 10 mm ground screw on back, then unplug the antenna, 2 electrical connectors and that's it. I dont recommend an aftermarket radio without a schematic or someone that knows what they're doing. Like in the chiltons books, "reverse disassembly procedure to reassemble". Hope this helps

Oct 09, 2009 | 1995 Dodge Caravan

1 Answer

Radio wont work


did you hook up the ground wire to back of radio it is not in the main plug it will go a bolt on the center of the radio and to the metal frame behind the radio

Jun 04, 2009 | 1995 Dodge Caravan

1 Answer

Want to replace factory radio


go to walmart find your cd player, dash kit ,wiring kit and then this is what you do .. remove the old radio attach the wiring harnes you bought to the factory wiring harnes this will allow you to match the color code up for your new radio with out cuting wires then install the new dash kit witch will allow you to install your cd player with a factory look this should be everything ou need to know

Dec 04, 2008 | 1995 Oldsmobile Eighty Eight

1 Answer

Factory radio


cyan73

There's a tool you can get at any auto store thtat allows removal of dash radios.
the tool is actually a pair of U shaped hooks that allow the radio removal.

Hope this helps Loringh PS Please give me a rating Thks

Nov 08, 2008 | 2005 Dodge Magnum

Not finding what you are looking for?
1995 Dodge Caravan Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...