Question about 1992 Ford Escort 4 Door

1 Answer

How do u blead a clutch in a 1992 ford escort 1.8

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 80 Answers

how do u blead a clutch in a 1992 ford escort 1.8 - ani_caut.gif CAUTION: Be careful not to spill clutch fluid onto a painted surface.

  1. Remove the bleeder cap from the slave cylinder and attach a vinyl hose to the bleeder screw.
  1. Place the other end of the hose in a container.
  1. Slowly pump the clutch pedal several times.
  1. With the clutch pedal depressed, loosen the bleeder screw to release the fluid and air.
  1. Tighten the slave cylinder bleeder screw.
  1. Repeat steps 3 through 5 until no air bubbles appear in the fluid.
  1. Tighten the slave cylinder bleeder screw to 6-9 Nm (52-78 lb-in).

5833316.gif

Posted on Jun 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 ford escort


fill clutch master cylinder. there should be a slave cylinder at top of trans case. bleeder on slave cylinder. crack bleeder with clutch applied. (pump up and hold). do same thing until stright fluid comes out of bleeder.. clutch should be solid after this operation.

Dec 23, 2012 | 1992 Ford Escort 4 Door

1 Answer

Adjusting the clutch on a 1992 ford escort gt


If I'm not mistaken, the clutches on all the newer model years are not adjustable. And the 2001's are included since the change.

May 06, 2011 | 2001 Ford Escort ZX2

1 Answer

Hello I have a 1992 ford escort that I bought new. over the years you had to really push hard on the clutch pedal to get the engine to crank espectlly when it is cold out side. well today its very cold...


HYDRAULIC SYSTEM BLEEDING
  1. Check that the brake master cylinder is at least 3?4 full during the entire bleeding process.
  2. Remove the bleeder screw cap from the clutch slave cylinder and attach a hose to the bleeder screw. Place the other end of the hose into a container to catch the fluid.
  3. Have an assistant slowly pump the clutch pedal several times and then hold the clutch pedal down.
  4. Loosen the bleeder screw to release the fluid and air. Tighten the bleeder screw.
  5. Repeat the bleeding procedure until no more air bubbles are seen in the fluid.
  6. Tighten the bleeder screw to 52-78 inch lbs. (6-9 Nm).
  7. Top off the brake master cylinder to the full line.
  8. Check for proper clutch system operation. Fig. 1: Attach a hose to the bleeder screw and place the other end of the hose into a container to catch the fluid - 1991-96 model shown 90987g40.gif
prev.gif next.gif

Dec 18, 2010 | 1992 Ford Escort 4 Door

1 Answer

1992 Ford F250. The clutch pedal will not release fully. I can't get it in gear! Really cold here in Nevada, does that have anything to do with it?


you need to blead out the clutch cylinder,same as brakes get someone to pump the clutch pedal up and down and then hold the peddle down and crack the bleader screw on the clutch slave cylinder.do this until all the air is out .If this does not work then you need to replace the clutch.

Dec 08, 2009 | 1992 Ford F250

1 Answer

Can I replace a brake hose front and back on 95 escort easily???


Not a good idea, if vehichle has abs then you can't blead it properly and even if it did'nt without bleading system, air in lines can cause brake failure.

Apr 26, 2009 | 1995 Ford Escort

1 Answer

1992 Ford F250 4x4 7.3 Diesel


those trucks had problems with the fire wall breaking .have some one push the clutch pedle and watch the fire wall from under the hood were the clutch master cylinder bolts too if the fire wall moves u need to buy the repaire kit from ford.

Apr 01, 2009 | 1992 Ford F250

1 Answer

Clutch replacement


it should only take about 6 hours have these tools a 32mm 6point socket half inch breaker bar and ball joint seperator to pull cv axels and also when removing axels have vehicle in neutral and easy 1 person bleading find hose to fit on the teat of the bleader valve on cylender if you need more help call 507-210-1278

Dec 30, 2008 | 1998 Ford Escort

1 Answer

Finding clutch cylinder


Look on the drivers side close to the firewall; it should have a screw-on cap.

Dec 24, 2008 | 1992 Ford Escort 4 Door

1 Answer

1992 Ford escort


First you need to buy new clutch pedal and then follow the instruction given in this link:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008df85



Good luck.............
PS Dont forget a fixya rating!

Jul 17, 2008 | 1992 Ford Escort 4 Door

Not finding what you are looking for?
1992 Ford Escort 4 Door Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...