all cars it is 1 of 3 places off the crank shaft
front ,center or rear,. some even are no the tranny flex plate.(crude reluctor)
the water beetle,
no country told. usa CAR IF YES WHY NOT SAY SO , WE USE JUST ONE 2.0l
NO ENGINE TOLD LOTS OF 2.0.
A5
BEETLE 2012-2013
TSI 2.
0L??????
2013 VW beetle 2.0 TSI turbo engine. 16 VALVE?
THE
EA888?????
3 generations of TSI MADE, GEN 2 IS 2008
197 bhp 2.0-litre turbo petrol engine
A5 BEETLE
VW OUCH
CALLS IT AND ENGINE SPEED SENSOR. SURE BUT IS NEVER IT'S PRIMARY GOAL EVER (rpm) THE GOAL IS EXACT SPARK AND INJECTION TIMING
NOT SPEED,
USA SHOP MANUAL SAYS.
Engine Speed Sensor G28 <<< BINGO REAL NAME FOUND, HARD TO DO.2.0l
- On the front lower left side of the cylinder block, next to the oil separator. Refer to (see more...)
- Removing and installing. Refer to Engine Speed Sensor G28, Removing and Installing.
PULL ENGINE COVER
Open the air guide pipe hose clamp
2
Disconnect the connector
arrow.?Remove the noise insulation. Refer to
see Noise Insulation; Overview - Noise Insulation.
?Remove the bolts
1 and 4 and remove the air guide hose downward from the
Throttle Valve Control Module J338.
?Remove the air guide hose
1 from the charge air cooler and remove the air guide pipe downward.
Disconnect the connector
1 from the
Engine Speed Sensor G28.?Remove the
Engine Speed Sensor G28 bolt.
G28 IS SUPER SECRET CODE FOR CKP. (USA NAMES)
×