Question about Chrysler Town and Country

1 Answer

1996 town and country need a cyndler layout for spark plugs i have codes po300

Posted by on

  • bernardnorwo Jun 05, 2010

    thank u im going to see if the wires were cross i have these codes po353-po300

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

Here is the cylinder diagram that you requested, and apparently it is the same between the 3.3 liter and 3.8 liter engines.


1996 town and country need - cf88d08.gif

Posted on Jun 05, 2010

  • Zaraki Jun 05, 2010

    The P0300 is the DTC (Data Trouble Code) for "Random/Multiple Cylinder Misfire Detected" and the ignition wires (spark plug wires) and the spark plugs are the most likely cause of that DTC and you should replace them.



    The P0353 is the DTC for "Ignition Coil C Primary/Secondary Circuit Malfunction" and that would mean that the "C" coil in the coil pack has malfunctioned, and you should replace the coil pack.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

08' town and country shows codes p0406, p0404, p0301, p0300


egr valve is stuck open at idel exhaust gas is entering engin causing lean condition and missfire your po300 301 codes replace egr and clear codes

Feb 09, 2014 | 2005 Chrysler Town & Country

1 Answer

2008 town and country po339


That code could be from bad plugs. There is a chance that the wires to the plug are bad and also the wires to the crank sensor could be having problems. Keep in mind that the crank sensor has another part on the crank shaft that can have problems too.

Jul 10, 2013 | 2008 Chrysler Town and Country

2 Answers

1996 328i bmw po 300 code/what's the cause? how do I fix it


there is a code table here: code table
hope it can help u and good luck

Mar 09, 2013 | Cars & Trucks

1 Answer

2008chevy malibu misfire


Which code you have po300 or po301.po302 .PO301,PO302 will be coil or module.PO300 could be bad spark plugs,vac. leak,clog fuel filter,bad fuel pump,bad battery.

Feb 04, 2013 | 1996 Ford Crown Victoria

1 Answer

I have a 1996 Chrysler 3.8. town and country mini van


The oil pressure light probably came on when the engine stopped.
You would have lost your power accessories then too.
Someone will need to figure out if you have lost fuel to the injectors and/or spark to the plugs to know where to look for the problem.

Jul 23, 2012 | 1996 Chrysler Town & Country

1 Answer

Please help 1996 chrysler town and country misfire


i have a1996 t&c had same problm,replaced,coil,cam sensor,crank sensor,wasnt it,put pcm in,saloved the problem,probly,pcm

Mar 31, 2012 | 1996 Chrysler Town & Country

1 Answer

1996 chevy blazer cyl 1 and 2 are misfiring,good spark,cap fine plugs and wires good, no vacum leaks po300 code help!


leaking fuel injector. if the engine light is flashing for sure. pull a plug out after a short run, soaked in gas, the spyder is bad. 1996 your there, just did my 95.

Jan 02, 2012 | 1996 Chevrolet Blazer

1 Answer

WHAT IS THE CORRESPONDING ORDER OF SPARK PLUGS TO


if you have a 3.0 engine,
firing order is 123456 counter clockwise,

#5 #6
#3 #4
#1 #2
front of engine

BUT ONLY REMOVE AND REPLACE ONE WIRE OF AT A TIME!!!

Dec 05, 2009 | 1996 Chrysler Town & Country

1 Answer

Po300 multiple misfires.I have changed the coil packs,spark plugs,spark plug wires etc and I am still getting the po300 and its really nerve wrecking.I need help with this 1996 Oldsmobile Cutlass Ciera...


reset the ec module by disconnecting the battery for a few minutes. If that does not work have autozone do a free scan and ask them to reset the codes.

Oct 13, 2009 | 1996 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...