Question about 2007 Ford Explorer Eddie Bauer

1 Answer

How do you re-program the security code on a 2007

How do you re-program the security code on a 2007 ford explorer? not the remote the numbered buttons on the drivers door thank you

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

FORD KEY PADS

  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed. (MAYBE)
KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-Some vehicles use 5 turns of the key instead of 8

Posted on Jun 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No dashlights backup sensor or cruise control on ford explorer


have the CPU program reset using a code reader as jumping produces a surge of power that corrupts the program

Mar 10, 2014 | Ford Cars & Trucks

2 Answers

How can I eliminate factory alarm system on 2007 ford explorer


I don't think you can fully eliminate the alarm system on the 2007 ford explorer, to my knowledge.
That would contradict security system mantras because if it was common knowledge to do so, then any thief could disable it and take the car undetected.

Jan 02, 2011 | 2007 Ford Explorer Eddie Bauer

1 Answer

I have lost my key and remote to my 2006 Ford Explorer and the dealer wants to charge my $300.00 when they only supplied me with one key and remote to begin with. How can I get a key and the code to...


just ask for the key first you can get a used remote form my be ebay and used your owner manual info.to program it if the key had a chip in it,will cost you $100 or so the remote mybe $20

Nov 16, 2010 | 2006 Ford Explorer

1 Answer

How can i program my door lock code or find out what it is. on my 2000 limited edition explorer


FORD KEY PADS
  • Enter permanent factory code
  • Press the 1/2 button within 5 seconds to enter programming mode
  • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed.
FORD KEY PADS/REMOTES
  • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
  • Press any button on new remote, doors will lock, unlock to verify
  • Do the previous step with the second remote, doors will lock unlock to verify.
  • Turn ignition off. Doors will again lock, unlock to verify.
NOTE-I found that some Explorer/Mountaineers enter program mode after 5 times-not 8.

Here is the link for further info.


http://www.2carpros.com/how_to/how_to_reprogram_key_remote_fob.htm


Your factory code is on a card in the owners manual. If that is lost, access the control module in the cargo area behind the left cover panel.

You MIGHT be able to see the code printed on it, or you might need to pull it out in order to see it.

May 27, 2010 | 2002 Ford Explorer

1 Answer

How to program the garage door opener


Hold down the 2 outer buttons until the red light flashes (20-30 seconds) and release.
Select one of the 3 buttons you want to program and press that button.
Hold the handheld transmitter 1-2 inches from the visor transmitter.
Using 2 hands, press and hold the button on the handheld remote and the visor remote at the same time.
Continue to hold both buttons until the red light on the universal transmitter flashes first slowly then rapidly.
Release both buttons when the rapid flashing begins.
The transmitter is now programmed.
Note that if the remote doesn't open the garage door, your opener may have a "rolling code" or "code protected " feature.
If your opener has a rolling code feature then you will have to train the opener to accept the visor transmitter. See the owners manual for the opener.
I hope this helps you out. I do not have this feature in my car, I took the instructions from a ford manual. The manual also gives a phone number to call if you have problems 1-800-355-3515 (Homelink). I don't know if this number is still good or not. It can't hurt to try it out. Good Luck!


Apr 10, 2010 | 1999 Ford Explorer

3 Answers

Is there a way to reprogram the keypad for the keyless entry on a 1999 ford explorer?


if i was u i would talk with ppl who do aftermarket security systems they would have a really good answer for that or someone on the internet might sell a reprogramer on like ebay

Aug 10, 2009 | 1999 Ford Explorer

1 Answer

Keyless remote wont work


try to reprogram the remotes using these instructions..........
i assume for 02 explorer not th 05 frestyle listed (although similar procedure)
Remote Transmitter Programming NOTE: All remote transmitters are programmable and must be set at the same time.
  1. Make sure that the anti-theft system is not armed or triggered and key code programming is not active.
  1. Open the door, then press the driver door lock control switch UNLOCK button.
  1. Turn the key from OFF to ON 8 times within 10 seconds, with the eighth turn ending in ON. If the program mode is sucessfully entered the doors will lock and unlock to confirm.
  1. Press any button on a remote transmitter, and the doors will lock and then unlock all doors to confirm that the remote transmitter is programmed. All remote transmitters must be programmed within 20 seconds of each other. Up to four remote transmitters can be programmed to the vehicles security module each time programming mode is entered.
  1. If the door locks do not respond for any remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Locks, Latches and Entry Systems — Late Build or Locks, Latches and Entry Systems — Early Build in this section.
  1. NOTE: Exiting is acknowledged by locking and unlocking the doors if at least one remote transmitter has been programmed.
    Exiting the programming mode is accomplished if one of the following has occurred:
    • The key transitions to OFF.
    • 20 seconds have passed since entering programming mode or since the last remote transmitter was programmed.
    • Four remote transmitters have been programmed.

Jun 02, 2009 | 2005 Ford Freestyle

1 Answer

Change door code on 98 explorer


You will have to find the program code which is located on the processor either in the right front glove box area by the kick panel or in the left rear compartment when the hatch is open...you will see the 6-8 digit security key numbers and enter them on the key pad wait for thebeeps to begin and put your code in quickly befor the beeps end. I would be more specific but as I remember It varied for different models also I worked at Japanese dealerships along with Ford.

Mar 30, 2009 | 1998 Ford Explorer

1 Answer

How to program a keyless remote entry in a ford focus 2007


are you trying to re-program the code? I had an 06 ford taurus and the code to re-program the door code was on the back of the fuse box or something on the floorboard against the inside of the firewall.

Mar 29, 2009 | 2007 Ford Focus (3 Door) Hatchback

Not finding what you are looking for?
2007 Ford Explorer Eddie Bauer Logo

521 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...