Question about 1998 Lincoln Town Car

1 Answer

Signal light flasher location

Where is the signal light flasher located---we're trying to find it so we can change

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,841 Answers

The turn signal Flasher Relay on your 1998 Lincoln Town Car is located on the driver's side, behind the dash, mounted on passenger side of the steering column. Purchase one before replacing so you will know what you are looking for.

Posted on Jun 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the turn signal flasher unit located on a 1990 oldsmobile ninety eight regency brougham?


DONT DIAGNOSE THE PROBLEM! THAT MAY COST U MORE. Let the tech do it. Something like a bad flasher is a simple issue. If u have a fair tech u wont be soaked in labor. Getting back to your question, the flasher is located in the fuse box. If the flasher was NG the lights would show on the dash but would not flash. u may have an electrical short in the turn signal switch circuit. u can try changing the flasher (its simple & inexpensive enough) but it may not solve your problem. Remove the flasher, put on the turn signal & w a test light, test the connector on the fuse box for voltage. Jump the connector to see if the light activates. If so replace the flasher. If u don't want to test just replace the flasher as a test. Good luck

Mar 25, 2017 | Oldsmobile 98 Cars & Trucks

1 Answer

Signal light flasher location


The turn signal flasher and the emergency flasher on most cars are located in the same area. Turn on the emergency flasher and find the sound......the turn signal flasher should be in the same area.

Sep 09, 2014 | 1998 Buick Century

1 Answer

Turn signal flasher location


located under dash to left of the steering colume. note there are 2 flasher relays one for the emergency flashers and the other is the signal flasher. to know which one is the signal one turn on the emergency lights and look for the flasher the one that is clicking is the e-flasher. the signal flasher looks the same locate it and replace.

Jul 05, 2014 | 1988 Plymouth Reliant

1 Answer

How to change flasher unit 0n 2002 Saturn L-series


WARNING The flasher unit for turn signals should not be switched with a flasher unit for the hazard lights. To check the filaments of all of the turn signal bulbs and the brake lights, turn on the hazard flashers and walk around the car.
A flasher can be located in the fuse panel, under the dash in the wiring loom, in a glove box, under the hood, or somewhere else.
f36-02.jpg A fuse panel. Most flashers are located under the dashboard on the driver's side. When working properly, a flasher is easy to locate because it makes a ticking sound. When it is not functioning, a service manual may be needed to help locate it. Lighting company catalogs generally have pages listing the location of flashers.
To replace a flasher:
  • A flasher features two or three prongs that plug into a socket.
  • Just pull the flasher out of the socket and replace it with a new one.

Aug 24, 2012 | 2002 Saturn L-Series

2 Answers

My turn signals won't come on at all?


check the fuse if good then turn on the hazard lights if they work then you probably need a turn signal flasher which is a separate flasher unit then the hazard one.it usually looks like the hazard one so with the hazards on and locate it then you will know what the signal flasher looks like and you will also know not to change the wrong flasher unit.the signal flasher is often located at or near the under dash fuse panel or somewhere in the dash you don`t say what type of car your talking about.

Dec 12, 2011 | Cars & Trucks

1 Answer

Signal lights stopped working


If the fuse is good and the flashers work then you have a bad signal flasher, this car uses two flashers in one located under the dash, one controls the hazard lights and the other the signals, these are all inside one flasher, so turn on the hazards to locate it by listening to clicking noise. i have inclosed a diagram to help locate it. its on leftside kick panel by your left foot, replace the flasher and see if that does it, good day12_6_2011_6_03_02_pm.gif

Dec 06, 2011 | 1991 Honda Accord

1 Answer

My turn signals went out and i cannot locate the flasher, i located my hazards flasher, but i need to locate the turn signal flasher


they both use the same flasher ,try changing the hazard light switch as they do go wrong and then the flashers stop working

Jan 05, 2011 | 1992 Chevrolet Lumina

1 Answer

Where is the turn signal flasher located?


should be drivers side under dash,,u have to take the panel down,,its near the radio on the back side of the panel ,,some times u can turn ignition on turn signal on,,lesson for flasher,,to locate it,,hope it helped

May 28, 2010 | 1999 Pontiac Bonneville

1 Answer

I am trying to locate where the flasher for the turn signals goes on my 96 cutlass ciera


there are two flasher for this car, one for the hazards and one for the turn signals, the turn signal flasher is located behind the center of the ashtray,the hazard light flasher is located on the fusebox center.this fuse center is located behind the right side of the dash to the right of the glove box, hope this helps.

Mar 01, 2010 | 1996 Oldsmobile Cutlass Ciera

3 Answers

97 olds 88, left turn signal not blinking.


possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

Sep 12, 2009 | 1997 Oldsmobile 88

Not finding what you are looking for?

Open Questions:

0 Answers

98 Lincoln TC,Cold starts fine ,runs good until warm, then shuts off. No codes,Cranks ok, have spark, PATS ok. No fuel pressure, cant hear fuel pump prime,New Fuel relay. jumped fuel pump - works. I do not hear fuel pump prime up, do not have fuel gauge, but pressing on valve in fuel rail- no pressurized fuel. Fuel regulator seems ok, not leaking / vacuum line dry as a bone. If I let it set for 15 min , it will start up again, but for a few minutes then dies out. If I let it set overnight it starts up perfectly and runs until operating temp is reached then stalls/stumbles, and shuts down. Vacuum is good while cranking, even with no start, Checked Inertia switch in trunk, it is not tripped. I have seen Ford TSB summaries' that mention issues like this , but I am not able to see to description. A point to add, the MAF sensor was cleaned, then I decided to replace it and did not make a difference. I do not have any stored codes, and the PATS is working fine, typical 2 second flash from and once key is inserted a 3 second steady light, then disappears. I have seen the TSB mentioning C103 Connector, it looks fine, I swapped out fuel pump relay with ac relay, still no difference.mention of wires around battery, do not know where to start. in dash service engine light and odometer is normal, seen other posts the say they only have lines, but mine is ok. the start of all of this , I washed engine with regular garden hose, ( not using pressure washer).also in the mean time, rear window defroster stopped working as well, can not say for same reason, but a mention.My problem started after washing engine. this is one of four Panther platform vehicles I owned with exact 4.6l w code engine, which I rinced down before. The only sensor I can think of is Oil pressure , or a corroded wire

Feb 27, 2017 | 1998 Lincoln Town Car

See all 1998 Lincoln Town Car Questions

1998 Lincoln Town Car Logo

731 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5520 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...