Question about 1981 Ford F 150

3 Answers

Motor wont fire changed plugs rotor coil and wires

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Before I replaced the starter solenoid the engine would click at the solenoid now that I put on a new one the engine does notting. also it is mentioned a css is at the clucth patell I can not see it .

Posted on Jun 16, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Using starting fuel to check fuel pump working or not; check wire in fire order; check coil pack not moved.

Posted on Jun 05, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Repalce the ignition module,it is on the firewall on drivers side

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It mayI have no fire going to the coil or from the coil to the plugs


Have you checked the wiring, the spark @ plug, Power to the coil???

Engine Won't Start No Spark - Auto Diagnosis Repair Help

aa1car.com/library/no_spark.htm
If your engine cranks normally but will not start because it has no spark, or it ... If an engine has a coil-on-plug ignition system with no plug wires, remove one of ...

No-start, No-Spark diagnosing simulated - YouTube

? 5:13
https://www.youtube.com/watch?v=XSWN1M8Hoqo
May 19, 2010 - Uploaded by FrankHurtAuto
Simulation of no start with no spark diagnosing, ... Ignition coiland module test with test light (ScannerDanner Premium lecture) - Duration: ...

getting fire from coil but not to plugs - CarGurus

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusJun 12, 2013 - 2000 dodge ram 1500 4x4 not getting fire changed distributor cap, coil, pickup ignition, rotor, plugs, plug wires 2 answers. ... 1994 dodge 5.9 just shut off and wont start back up there is no spark or fire from coil or plugs. ... 94 dodge van 318 eng will not start new plugs new crank ...

Ignition Coil Troubleshooting: (No) Fire in the Hole

www.secondchancegarage.com/public/coil-troubleshooting.cfm

Jan 27, 2016 | Cars & Trucks

1 Answer

My cabrio wont start it will crank but not fire


When you squirt water on plug wires and the car stalls, that means that your plug wires are bad. PLUG WIRES (not rotor, cap, or any sensor).
Replace your spark plug wires with new, and you should be fine.

May 14, 2015 | Cars & Trucks

1 Answer

Y is my 97 chevy only fires on the number one cylender


if you have fire on the number one cylinder,it means that the ignition coil is working so your problem can come from spark plug wire or cap and rotor . unplug the wire from ignition coil to distributor and check for fire you are suppose to have fire because you saying having fire on cylinder one. from there change cap of distributor and rotor plus a set a spark plug wire.

Oct 07, 2014 | Chevrolet Silverado 1500 Cars & Trucks

2 Answers

Have1999 suburban k1500 5.7. have spark out of coil but no spark at plugs. have changed rotor and cap several times what else could it be.need wiring diagram to see where wire out of distributor goes...


If you can tell me what color the wire is I should be able to tell you where it goes.
But if you are getting spark from the coil tower the primary ignition system is working.
Have you checked the coil wire, and will it fire a plug ? The coil could be weak enough to fire a plug in open air but not in a cylinder under compression.
You do know for a fact the distributor rotor is turning, right ?

Jan 31, 2014 | 1999 Chevrolet Suburban

3 Answers

Ignition mystery! 1994 GMC Suburban 2500 5.7 mtr. No spark to spark plugs. Have spark from coil to distributor. Have changed coil wire, cap, rotor, ignition module, and coil. have 12.5 volts going to...


I guess you could have the ignition analyzed on an oscilloscope. Maybe a tech could see something then.
I always heard the only gap was the spark plug gap-the rotor has no gap-are you sure you got the correct rotor? And does it touch the top distributor cap coil wire tower?

Let us know. It is a mystery worthy of a solution.

Sep 21, 2013 | Chevrolet Suburban 2500 Cars & Trucks

2 Answers

Wont start.


If it will turn over check to see if its fuel or fire. To check for fuel, spray quick start for a few seconds into intake. If it starts and stops. its fuel. Change fuel filter and check fuel pump. If it does not start its fire, Could be distributor cap, rotor, coil, spark plug wires or spark plugs. If it does not turn over it could be battery or starter. Check battrey connections, ground strap from motor to body and ground wire from battery to motor and body.

Jul 26, 2010 | 1995 Honda Civic

1 Answer

Ignition coil wont fire


change the electric coil ,,plugs,wires,cap&rotor,change the fuel filter

Oct 31, 2009 | 2000 Mitsubishi Galant

3 Answers

Replaced distribitor and rotor now wont start on 91 chevy blazer


make sure u have the wires in the correct spots, there is a firing order, u need to have them in the right spots or else it wont fire, call ur local parts store and they will give u the firing order

Jun 27, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

1994 dodge 1500 wont start after changed plug wires


Make sure your firing order is correct. Also if you replaced cap and rotor make sure coil wire isnt loose. If you cant find the firing order its stamped on your intake manifold, cylinder numbers should also be stamped above each cylinder on the manifold.

Mar 27, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...