Question about Chevrolet Cobalt

1 Answer

Where can i connect my oil line for my turbo charger if i dont have any stock oil lines in my ecotech engine i have a 2.2 liter ecotech motor chevy cobalt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

If you look where the oil filter is you may have a bolt in the housing where the filter is screw onto.

If not then you will need to check a oil gallery which usually run along the bottom and going up to the top of the engine block. They will have bolts blocking these on the outside of the engine block.

If you have non there then look along the cylinder head for oil galleries which would run up to the cam gear. These will be bloccked off with bolts also.

Just remove some of the bolts in the engine block and the cylinder and see if oil leaks from them. They will be a supply line to your turbo can use.
The bolts wont be very big or very long usually they will be a size 3/8 - 7/16 bolt head or 10 - 12 mm.

Hope this helps, let me know how you get on.

Thanks

Jason

Posted on Jun 05, 2010

  • mquint5743 Jun 05, 2010

    im going to try this out and see if it works and will post the results if it does work or not

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a oil pan on a 1993 chevy c1500 2 wheel with a 5.7 liter engine?


Drain the oil. Loosen the engine mounts and jack up the engine. Put 2x4s under the mounts. Remove all the pan bolts and drop the oil pan. You will also need to disconnect the oil cooler lines at the oil filter housing to get to some of the pan bolts. There are also some engine support brackets you will need to remove.

Oct 21, 2014 | Cars & Trucks

1 Answer

What is the reason for oil entering in the inlet manifold of a CRDE engine


OIl from the pcv valve from the oil being retained in the rocker cover from the oil not being allowed to run back to the sump.. Blockage at the oil return line to the sump from the turbo allowing oil pressure to leak past the seals on the turbo shaft. Check for kinked hose or hose failing internally closing it off

Mar 10, 2013 | Cars & Trucks

2 Answers

Does 2003 Chevy ecotech motor have a timing belt or chain


It has a timing chain and a balance shaft chain also. My 2003 Cavalier jumped time about 2 months ago and that is what it had in it.

Jan 06, 2012 | 2003 Chevrolet Cavalier

1 Answer

How often should you clean oil out of the turbo charger on the gs? i was told it needed to be done.


I dont think you can "clean it" other that taking the inlet hose off and spraying some carb cleaner at the blades to clean them. It may be a good idea to take off the turbo inlet oil line and make sure its clean, oil starvation is what kiils turbos. . I would recommend Mobil1 oil to be used in the engine.

Dec 25, 2010 | 1998 Buick Regal

1 Answer

I have a diesel turbo and i want to put it on my ford


There is more to supercharging an engine than just putting a turbo charger on it. Fuel delivery will need to be adjusted. A different cam shaft, valves and maybe pistons.
You will probably need a larger radiator to get rid of the additional heat. The additional horse power and torque will destroy the stock transmission and differentials so you will need to replace with bigger.
Oil should be tapped off just after the oil filter. There is probably a plug somewhere close. Be careful not to starve the rest of the engine for oil. May have to put a oil pressure gage at the end of the oil gallery to monitor minimum oil pressure.
Are you sure you want to "turbo" this engine?

Apr 30, 2010 | 1998 Ford F150 Regular Cab

1 Answer

I have a 1979 chevy 4x4 with a turbo 350 tranny problem


need trans hi gear cluthes are probably bad. total rebuilt is needed if done diy flush lined and install extra cooler for trans

Mar 14, 2010 | 1983 Chevrolet K1500

1 Answer

Some thing behind my torbo sprung a masive oil leak losing about 2 gal in a matter of seconds the injectors lost presur killing the motor befor the oil presur gage droped so i dont think it hurt the bottom...


start by looking at one of the oil lines that conects to the turbo they are high presure and i have seen the lines come out of a turbo with vibration
when re assembling use some whread lock on them just to hold it in for ever

Jan 23, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Diesel 6.0 running very bad and getting too hot


What you have described is a classic turbo air leak. Check the clamps & air lines from the turbo to the intake. If you do not find an air leak (you should be able to hear the air escaping) it will be a turbo problem. Unlike gasoline engines too much fuel in proportion to the air will cause the vehicle to run hot and also to smoke.

Jul 06, 2009 | 2005 Ford F 350 Super Duty

3 Answers

What is the size of a Volvo v70 engine?


There are 3 engine choices in the 98 volvo v70. All are 5 cylinders, 1. 2.3L turbo
2. 2.4L MFI DOC
3.2.4L Turbo
#2 is the most common engine for that year and model. If your engine doesn't have a turbo, that's the one u have.

Jan 06, 2009 | 1998 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...