Question about Mitsubishi Outlander

1 Answer

I have a Mitsubushi Outland 2003 that the heater quit working about a month ago and today the air was working OK and then the green AC button started to blink , but no AC. Any ideas? Could these two be related?

Posted by on

  • kckruse Jun 05, 2010

    How much will it cost to get the blender door checked?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 75,235 Answers

It sounds like the AC/heater temperature control blend door has malfunctioned, the AC/Heater control in the dash can be tested for fault codes when the light blinks, this will give direction to the problem, the dealer has to do this test, the blend door that changes air temp is the most common cause of this problem, other faults are a leak in the AC system and u are low on charge, go out under the hood and see if the AC compressor on the engine is engaging, or if it kicks on and off quickly which indicates a leak and then the cause is a low charge of refrigerant.

Posted on Jun 05, 2010

  • kckruse Jun 05, 2010

    I beleive the Ac is low on R134a since it has been slow to cool down too.



    As for the heater the temperature controll knob has been hard to turn since I bought it. But I've never heard the door flap thump when switching back n froth.

    I ve also checked the fuses. If the heater air is blocked off should nt there be some hot somewhere? Ive check the coolant and the water temperature guage is always fine.

  • yadayada
    yadayada Jun 05, 2010

    before you can have any idea what the cost you must have the tests done, did u check the compressor operation as I instructed for low charge?, by the way it is blend door, just want u to have the right term.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan speed control works on high only


I am experiencing the same problem. I've had two different diagnoses:

1) Blower Motor Control Module/Resistor (under $40)
Dorman Part # 973442
2) AC and Heater Control Switch (Reman. Part: $234 + Core charge of $222.)
DORMAN Part # 599030
(Prices current from RockAuto.com.)

In addition to the recent blower problem, 5 years ago I had the A/C blowing out the floor/defrost vents only, too; but with no vacuum leaks. I was told then I needed the AC/Heater Control Switch; but instead I made it a "manual" automatic climate control. I disconnecting the vacuum connector plug from the control unit and used the male end to make the connections. It was much easier on my pocket book and still works today.

The connections I found on my 2003 Grand Marquis:
Black: Supply
Blue: Panel door
White: Air inlet door
Yellow: Floor/Defrost door
Red: Floor door

The Fix:
I used a vacuum hose directly from Black to Blue and White. This required a short piece of vacuum hose with one T connection. The temp control still works including the fan speed control (until now). I live in Texas and it doesn't get too cold. But occasionally I connected Black to Yellow directly to get me thru those real bad cold spells.
Bottom Line: Not sure what I going to do but leaning towards replacing the Control Switch and the vacuum connector plug. Especially, since the price of the switch is more reasonable today. A 50% savings from 5 years ago.

Jul 05, 2014 | 2003 Mercury Grand Marquis

1 Answer

Car heater blowing cold air


Sounds like ur ac pump is locking up its time for another one and also is your coolant level okay maybe ur heater core went out they dont give early signs of quiting they just go out

Jun 22, 2014 | 2000 Chevrolet Cavalier

2 Answers

The ac quit working...no fan, no air. The 30amp


check the ac blower transistor under passenger side of dash behind the blower motor. on my 2003 compressor would not cut on , front blower only operated on high an blew hot air, rear blew on all speed but only hot air. $58.00 at dealer plus tax. 15 minute fix. there is a video on youtube that documents the process. just fixed today

Jul 05, 2010 | 2006 Honda Odyssey

2 Answers

AIR CONDITIONER QUIT WORKING


Pop the hood, start the vehicle and turn the AC on. Watch the compressor, it should have a center that rotates on an off and you should hear a clicking sound. This is the compressor clutch you are looking at. If the compressor is not doing this, check the fuses for the AC. If the fuses are good, then most likely the high side sensor switch is not working, therefore the clutch never engages and the air never gets cold.

Try that and get back to me, ok?

Sep 18, 2009 | 2003 Kia Sedona

1 Answer

BMW 328i AC Not Cooling


Check the temperature control box.

Jul 30, 2009 | 2003 BMW 5 Series

1 Answer

2003 Neon air coditioning shutter


the AC servo that kicks up the engine idle speed when the AC is no..Is stuck or faulty...Replace it. 

Apr 05, 2009 | 2003 Dodge Neon

1 Answer

Fan quit on 87 celebrity, heat ac, etc.. fuse ok ????


Hi
Check for bad connection at heater resistor or try tapping heater motor lightly
with ignition switch on and heater switch on. Could be heater switch connection.

Apr 01, 2009 | 1987 Chevrolet Celebrity

1 Answer

Front AC/Heater Fan Out, 2001 Dodge Durango


it could be that fan rester went out. pick up a repair manual from Napa. look to see if you need to take the dashbord out. some of this are lockated betewn the fire wall and the blower moter housing. i have had a hard time looking for on on the internet.

Feb 24, 2009 | 1997 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...