Question about 2001 Chevrolet Corvette

1 Answer

Traction control, active handling, and abs lights are on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 218 Answers

These all get there infomation from the abs sensior's at each wheel one of the sensior's could be malfuctiong or the fuse could be bernt out

Posted on Jun 04, 2010

  • rharper301 Jul 25, 2014

    There are several things that can cause this problem. On a 2001 Corvette, about 95% of the time the prolbem is the Electronic Brake Traction Control Module which is also known as the EBTCM. You can get a replacement from GM for about $900, or you can have it repaired for about $100 - $200. I had mine repaired by ABSFixer. Worked great for about 2 -3 years and then broke again. They guarantee their work for life so I sent it back in and they repaired it again for free. It only lasted a few days on the second fix and now they say it is not repairable. Good luck with your repair (or new module if you have deep pockets!). I wouldn't recommend going with a new one. They have the same problem as the old one....cheap diodes. Go with ABSFixer first.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Traction control light is coming on going around bend at only 50 mph


VWVortex.com - Traction control light flashing, losing power?

forums.vwvortex.com > ... > VW Model-Specific Forums > Golf IV R32

May 20, 2011 - 25 posts - ‎14 authors
So last night I was driving home, went around a pretty sharp turn and my traction control light started flashing for about 5 seconds, then went ... Traction control and ABS light issues
15 posts
Feb 22, 2010
E-Brake warning light stays on -- help
22 posts
Sep 27, 2004
More results from forums.vwvortex.com

Abs and Esp Lights on!? - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=333091
Oct 18, 2011 - VW MKV-A5 Golf/Jettas. ... Suddenly i noticed that the ABS and the ESP light on the dashboard was on. ... Fuel Economy: 47+ Avg (Passat DSG) 50 Avg (SE Manual) Warm Weather. ... I might suggest that your ABS and traction controlpick up their information ... A bent ring or bad sensor will set both errors. On-and off grinding on hard left and traction control light ...
Nov 3, 2015
ABS brakes activating when slowing down - wheel speed indications ...
Jan 20, 2012
More results from forums.tdiclub.com

Electronic Stability Control - Auto Diagnosis Repair Help


Dec 17, 2015 | Cars & Trucks

2 Answers

I have an 08 Jeep Liberty.Whenever the traction control kicks in it makes a growling noise.Any ideas what this could be?


The "growling " noise that you're hearing is the ABS pump being activated. Anytime the Traction Control System is activated or detects wheel spin/slippage, the ABS module will activate the pump because of the wheel speed variations. It is nothing wrong with the vehicle unless the TCS or ABS lights come on and stay on.

Mar 03, 2015 | Jeep Cars & Trucks

1 Answer

I have a 2002 VW New Beetle. The ABS light has come on and there is a chiming beep and the ABS light flickers. What could be the problem?


ABS - Anti-lock Brake System.
If the ABS lights on the dashboard permanently the ABS system is faulty. You must access the ABS Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ABS ECU, in other words reset the ABS system and turn off the warning lamp on dashboard.
ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.

For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.
tdisline_703.jpg


ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.
The ESP system means the Electronic Stability Program. ESP system includes the ABS system.


Jun 30, 2011 | 2000 Volkswagen Beetle

1 Answer

MESSAGE CENTRE TC


TC = Traction Active

If your vehicle is equipped with the Traction Control system, this message will stay on a few seconds after the traction system stops limiting wheel spin.

This message will appear when the traction control system is limiting wheel spin. Keep in mind that when the warning lights turn on, a fault code is stored in the ABS control module (in this case). Retrieving, diagnosing, and repairing any ABS system faults will be necessary to keep the light off. A common fault with ABS systems are the wheel speed sensors, stored codes may confirm this.

Hope this helps.

Apr 13, 2011 | 2005 Chevrolet Impala

1 Answer

I have a 2002 chevy impala ls 3.8 V6 automatic transmission with traction control problems, when its cold and you start the car a let it run for about 20 min sometimes when taking off the traction control...


front hubs will affect the traction control, it uses the abs sensor but usually it will turn on the abs light, traction control light and s e s lights

Dec 17, 2010 | 2004 Chevrolet Impala

1 Answer

Abs light is on and tractiioncontrol light says off but cant turn it back on with switch


abs light means that a problem is being sense in the anti lock brake system, Traction control only activates when needed and is not related to the abs light, if you turn the traction control on and try driving and making the car slide the traction control will activate.but as for the abs light you need to get your brakes checked.

Dec 06, 2010 | 1998 Buick Regal

1 Answer

I have a 2003 Impala LS 3.8. When turning the wheels, the traction control will activate making a moaning sound. Sometimes while driving, tractions service light will appear along with the ABS light and...


where do you hear moaning sound coming from ? Under the hood in engine bay ? That could be the ABS pump motor ! maybe going bad . service traction control light on ? DTC'S - diagnostic trouble code or codes stored . Have codes checked .

Jul 13, 2017 | 2003 Chevrolet Impala

3 Answers

03 Yukon Denali Traction Control/ ABS Problems


my 2000 yukon has the traction control light on and the abs light on any anwsers?

Jul 31, 2009 | 2003 GMC Yukon Denali

3 Answers

Service Active Handling, ABS and Traction Control Lights on


I have had exactly the same problem on and off for 3 years now - and just solved it last week thanks to another computer site. Remove and disassemble both grounds from the top of both the left and right frame rails adjacent to the front corners of the engine block. Completely clean the green corrosion from the internal parts with fine sandpaper and add dielectric grease then re-assemble. Clean the mounting bolt and frame hole while you're at it. Sounds time consuming and difficult, but it ain't. No more than 45 minutes combined. I am a technical airhead so if I can do it so can you. What clued me in was the problem always occurred around wet or humid weather. Also, the clock would always lose time overnite. That has ceased also. Good luck. Anyone know why my left headlite, when deployed, vibrates and shimmys??? Sully ptsully@roadrunner.com

Feb 24, 2009 | 2000 Chevrolet Corvette

Not finding what you are looking for?
2001 Chevrolet Corvette Logo

582 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...