Question about 2006 Toyota RAV4

1 Answer

A/c switch doesn't work

On a 2006 Toyota, the a/c switch started working on only a certain position. Now, not at all. Can anyone shed some light on the issue.

Posted by on

  • JIMMY Jun 04, 2010

    A/C SWITCH OR BLOWER MOTOR SWITCH? Option A) If its the blower motor switch (speeds 1-4) then it could be the switch or the resistors. Option B) If its the a/c switch (on /Off) can be the switch,relay, circuit,sensor in the a/c lines or compressor itself. Based on your write up I 'd go with option A.

  • wrenchme69 Jun 04, 2010

    its the speed switch. Resistors? Where.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,374 Answers

Right by the blower motor. Switch will lead you to them.

Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn light will not turn off, not blinking, When turn on signal or 4 way flashers goes off for a few seconds then comes back on


2006-2015 Toyota Highlander MAINT REQD Light Reset

seventrumpet.com/2006-2015-toyota-highlander-maint-reqd-light-reset/
Mar 15, 2015 - How to MAINT REQD Light Reset on Toyota Highlander 2006, 2007, ...Turn the ignition switch to the "On" position, but do not start the engine ... This procedure should applies to the second and third generation of the Toyota Highlander (2005, 2006, 2007, 2008, ... Your email address will not be published.

Oct 12, 2015 | 2005 Toyota Highlander

1 Answer

I have a 2006 BMW Z4 that will not start, Battery check OK 12.7 Volts.


1. Transmission interlock switch
2. Key may have failed. (Circuitry in head of key).

Mar 16, 2015 | 2006 BMW Z4 3.0i

1 Answer

Corolla 2006- both driving headlights dont work,dims work. brights work if lever is pulled back, bulbs have been tested .wiring appears to be fine . all other lights,indicators are fine. car is drive


as positioning the lever in certain positions allows the lights to work then the problem will most likely be in the light switch itself. Replace the light switch unit.

Nov 21, 2014 | 2006 Toyota Corolla 1.6

2 Answers

1996 Toyota tercel doesn't start doesn't crank


Well you may have more than one problem.
As far as cranking, a mechanic would check for voltage at the starter and trace back to the key switch. The key switch could cause both problems. There is also a neutral safety switch that could cause it not to crank.
You could also have a bad ground connection between the engine and body.

Dec 11, 2012 | 1996 Toyota Tercel

2 Answers

1994 Toyota Camry doesn't start without shaking


sounds like it having trouble starting. when was the last tune up ,and are there any codes on.

Nov 03, 2012 | Cars & Trucks

2 Answers

I have ford bantam 1.6i rocam 2006 model. It Doesn't start, It doesn't pump the petrol, the is no power to fuel pump


Refer to your manual there is a switch that deactivated the fuel pump in case of accident, there is a switch by the pasangers feet that if in the up position is activated to stop the fuel...

Aug 28, 2012 | 2006 Ford Bantam 1.6i

1 Answer

My toyota corolla 2006 model has the maint. required lights on. what does that mean?


It means your car needs an oil change, based on mileage. If you take your car to get the oil changed, they can reset the light for you. If you want the light off now, try holding in the odometer reset button, with the key on but engine off, until little dashes appear then one by one dissapear. This procedure may need to be done either on the odometer total mileage or trip A mileage or trip B mileage.

Step 1: Have car off.

Step 2: Push and hold in trip reset button.

Step 3: While still holding button in, turn key to ON, but engine off. Wait for the little dashes to appear and disapear. If it doesn't work on the odometer setting. before turning key off, switch to Trip A setting. If the procedure doesn't work on the odometer setting or Trip A, try Trip B setting.

Step 4: Turn key off. Then start car. Maint. required light should be off.

Jul 15, 2011 | 2006 Toyota Corolla

1 Answer

Hi, I have a VW Golf MK5 2.0 TDI Trendline and the passenger door will not lock, all the other doors lock no problem. Has anyone else experienced this? And can a anyone shed some light on this for me....


the door lock mechanism inside the door is stiff and if you remove the door panel and give it a good squirt with engine oil from a oil, can it may ease it off and it will start working

Nov 30, 2010 | 2006 Volkswagen Golf

1 Answer

I think mines doing it too


the daytime running light module needs to be replaced.

Jul 18, 2009 | 2006 Suzuki Forenza

Not finding what you are looking for?
2006 Toyota RAV4 Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...