Question about 2000 Chevrolet Malibu

1 Answer

Fan motor on a 2000 Chevy Malibu only works on 3-5 and not on 1 & 2. How to fix?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,374 Answers

Its the blower motor resistors or the switch itself.
You need shop manual. Then remove the switch and jump certain terminals with a jumper wire to see if fan runs at certain speeds. If fan runs at all speeds when jumped then the switch is your problem . if it runs at the speeds you described in your write up then its the resistors.

Posted on Jun 04, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3640 Answers

SOURCE: 2000 Chevy Malibu blower motor doesn't work on

remove dash insulator from under glove box. then move bcm to one side, fan resistor is beside the fan blower motor. the resistor will keep fan speeds from working. remove wiring and screws from resistor then take it out.

Posted on Oct 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FAN ONLY WORKS ON POSITIONS 4 & 5


the fan resistor is burnt out on1 through 3 speeds. it is under dash at glove box beside the blower motor. disconnect the electrical connector from resistor, remove the screws holding it in, then pull it out. best of luck Toolman,

Jan 17, 2010 | 2000 Chevrolet Malibu

2 Answers

Heater blower is not working in 1, 2, 3 and fan


MY 2003 MALIBU AC WORK VERY COOL FOR ABOUT ONE HOUR AND THEN TURN A BIT HOT AND THEN NO AIR COME OUT WHY I HAVE CHECK THE FREON AND ITS OK .

Nov 22, 2009 | 2003 Chevrolet Malibu

1 Answer

The heater in my 2000 chevy malibu is making funny noises ... speeds one and two dont work.. havent since we bought the car... for 2 years now.. but what is that sudden noise that came on yesterday... like...


I have ran into the same problem, there may be something has got into fan cage. remove fan motor and investagate to see if it is blocked, or if fan is going bad. it is behind glove box, to remove. remove lower right dash insulator panel from under glove box. slide bcm aside for room to get at fan motor. remove 3 screws from fan motor, and remove fan after disconnecting wiring. the blower motor resistor is beside fan motor. the resistor will make ya lose 1 and 2 speeds. for it is a 5 step resistor.

Oct 29, 2009 | 2000 Chevrolet Malibu

1 Answer

2000 Chevy Malibu blower motor doesn't work on positions 1 & 2. Would appreciate details on how to fix or change it.


remove dash insulator from under glove box. then move bcm to one side, fan resistor is beside the fan blower motor. the resistor will keep fan speeds from working. remove wiring and screws from resistor then take it out.

Sep 08, 2009 | 2000 Chevrolet Malibu

1 Answer

Known Issues with 2000 Chevy Malibu A/C


If you are having problems with the fan itself, online is a fix where the relay behind the ac-fan control panel needs to be replaced. Do a google search for 200 Malibu Fan control.

Jun 23, 2009 | 2000 Chevrolet Malibu

1 Answer

Blower motor or resistor?


If it was the motor that went out then it would not blow at all. The resistor is the culprit that starts killing off speeds. It should be about $25 to $30 at an aftermarket store like autozone or advanced auto parts.

Jan 09, 2009 | 2000 Chevrolet Malibu

2 Answers

2000 Chevy Malibu wiper delay and intermittent won't work.


I had this problem (wipers only work on high) with my 2002 Chevy Malibu and had to replace the 6 amp diode (22059733) on the wiper control board. It is connected to the back of the wiper motor and is held on by 3 torx screws.
Radio Shack has them for $2.75 6A, 50V Rectifier Diodes (4-Pack) Model:276-1661

Dec 11, 2008 | 2000 Chevrolet Malibu

1 Answer

Malibu chevy


I have the same problem with my 2002 malibu and my mechanic told me it is a burnt resistor. I am not sure how hard it is to change and I am assuming it is a resistor on the fan.

Nov 04, 2008 | 2002 Chevrolet Malibu

Not finding what you are looking for?
2000 Chevrolet Malibu Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...