Question about 2004 Audi TT

1 Answer

Need code for Audi TT radio because it is in 2 safe mode also turn signals light up but have to work the arm manualy to get them to work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 138 Answers

New vehicles are supplied with a radio operating manual. The radio code is printed on a removable card in the manual. If you don't have this the code is only available from Audi dealers. Once you have the code you can enter it by pressing and holding the TP and RDS buttons together until the display shows 1000. Then press the channel 1 button repeatedly until the first digit of the code is displayed in position 1. Use channel button 2 in the same manner to enter the2 nd digit of the code. 3rd button for 3rd digit, 4th for 4th digit. once you have the full code entered, press and hold TP and RDS buttons together again until display reads safe. Release buttons and radio should come on.

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What buttons do i push to take the concert radio in my 2002 audi TT out of safe mode and in code mode to reset it


IMPORTANT NOTE:
You must have the security anti-theft code for your Audi Concert radio from the car manufacturer, or from an Audi dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for a 2002 Audi TT Concert radio is:
1. Simultaneously push "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then simultaneously push again "SCAN" and "RDS" keys to confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready to use!

Oct 04, 2011 | 2002 Audi TT

1 Answer

I DON'T KNOW RADIO CODE FOR MY AUDI TT AND IT IS CURRENTLY IN SAFE MODE? HELP? reg x698 v v x


IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
You can find the radio code at: http://www.radio-code.co.uk/

The sequence of programming for 2001 Audi TT radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Mar 23, 2011 | 2001 Audi TT

1 Answer

I have changed the battery on my TT . The radio is howing safe mode, I know the pin but dont know which buttons I have to press to put it in, can you help??


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for Audi TT radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Dec 16, 2010 | 2002 Audi TT

1 Answer

My radio is in 2 SAFE mode on my 2004 Audi TT. My mechanic had to disconnect the battery to replace some parts on my car. when he turned the car on the radio was in 1 Safe mode. The code in the manual he...


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!
The sequence of programming for Audi radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Nov 20, 2010 | 2004 Audi TT

1 Answer

I have made 2 trys to unlock radio, I now have correct # what do I do it will not come out of safe mode.


IMPORTANT NOTE: You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!

The sequence of programming for Audi radio is:
1. Push simultaneously "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Nov 13, 2010 | 2001 Audi TT

2 Answers

2001 Audi TT Quattro Roadster Had to dis-connect the battery. Followed instructions to put back in the radio code. Everything worked... except now the word "phone" is showing and nothing is happening.


IMPORTANT NOTE: You must have the security anti-theft code for yours Audi Concert radio from the car manufacturer! For Audi Concert the sequence of programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jul 08, 2010 | 2001 Audi TT

1 Answer

Radio on 2002 audi TT not working


It is highly likely that the radio will have lost its security code whilst being disconnected from its power supply (your battery).

Any local dealer will re enter your code for you for a small charge unless you have the code stored in your radio user guide in which case you can re-enter the code yourself.


Feb 24, 2009 | 2002 Audi TT

2 Answers

Instructions to unlock stereo


THIS WAS POSTED ON THE AUDI TT CLUB WEB SITE.

Turn on the radio. The word "SAFE" appears on the display.

* Press the FM2 and RDS buttons simultaneously and hold them down until "1000" lights up in the display. Release buttons. Do not, under any circumstances, continue holding them down or press them once again. This would cause the radio to consider the number "1000" to be the input code number.

Use stations buttons 1 - 4 to enter the code number on your Radio Card.( THE RADIO CODE SHOULD BE WITH THE OWNERS MANUAL-??) Use button 1 to enter the first digit of the code number, button 2 to enter the second digit, and so on. Station buttons 5 and 6 cannot be used.

* Once the code is shown in the display, press the FM2 and RDS buttons again simultaneously and hold them down until the word "SAFE" appears on the display. Soon afterwards, a frequency will be displayed.

(If you do not have the "Radio Code", the Audi dealer, or someone, will have to pull the radio out to get the serial number off of the back.)

The radio can now be used again.

Aug 14, 2008 | 2004 Audi TT

1 Answer

Radio stuck in safe mode


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.
PLEASE RATE THIS !!!

Jun 11, 2008 | 2002 Audi TT

Not finding what you are looking for?
2004 Audi TT Logo

438 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14200 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...