At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
po121 is throttle position sensor is out of range.po442 is emissions system leak detected small leak.po455 is same as po442 but large leak.po496 is high purge flow . Check all the vacuum lines plastic also cause one of them is broken.
Po133 is and oxygen sensor code. Replace the front oxygen sensor use a bosch or OE sensor only. P0442 is and evap system leak. Most common fault is a cracked hose at the evap cannister at the right rear of the car.
codes po441 po442 po455 po456. code po441 - EVAP system no flow during purge conditions.code po442 -EVAP system small leak detected conditions. code po455 - EVAP system large leak detected conditions.code po456 - EVAP system very small leak detected. possible causes loose damaged missing fuel cap.fuel tank sensor disconnected or failed. ORING on top fuel sending unit leaking.purge valve vapor line clogged disconnected or purge solenoid failed.vent solenoid not closing or has failed.
EVAP Codes. You will have to go thru entire evap system,looking for a small leak (po442) Hoses,Switches,Valves etc. See if you can borrow a smoke machine.
po442 is evap emission control system leak (small) 1 of the lines for emissions is leaking. po455 is-- emission control system leak (large). turn off light with code scanner after it is fixed.
The problem is most likely to be with your vacuum line they put cheap rubber hose for this purpose. You should find a diagram at the front of the vehicle trace the hoses by this diagram. You most likely will find a bad piece of hose.
×