Question about 1998 Nissan Maxima

2 Answers

What would cause my 98 nissan maxima tail lights to stay on

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That is the same issue im having, but it did not work.

Posted on Jun 07, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 32 Answers

Check your brake light switch, which is under the bash to the top of the brake pedal

Posted on Jun 05, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is tail light relay on 1998 nissan maxima?


Is it the brake light or the running lights, are all the lights on went the ignition is in the off position and the light switch is in the off positions aswell or the brake lights are on including the third brake light?

Jun 29, 2014 | 1998 Nissan Maxima

1 Answer

2001 Nissan Maxima Tail lights will not go out.


Did you check the headlight switch ?

Jun 30, 2013 | 2001 Nissan Maxima

1 Answer

What's wrong with my 96' Nissan Maxima? Bought a


I suspect you have two separate issues your lights staying on is possibly a faulty stop and tail light bulb check both , I suspect you may also have a faulty starter motor.

Jan 04, 2013 | Cars & Trucks

1 Answer

98 Nissan Maxima - Check Engine Light, Knock Sensor


If the car is pinging you will set a knock sensor code.'
This comes from bad gas and running lean., You really need this professionally inspected to rule out the basics. I have seen alot of nissans with the knock sensor code stored but the light is still off.
Fill up the tank with high octane chevron and some techron injector cleaner and clear the light. If it stays off for a couple days then go get it inspected. Even if the code is stored it will still pass as long as the light is still off and the monitors have run.

Jan 04, 2010 | 1998 Nissan Maxima

2 Answers

2000 Nissan Maxima. Headlights work but tail lights won't come on. How do you fix the wiring of this?I have changed the bulbs and nothing. The brake, reverse, and turn signal lights work, so the bulbs...


tail lights work on a different filament than the rest of the lights you mentioned, it is possible both bulbs are burned out for that filament. if not, check the fuses as the tail light circuit in some cars is on a seperate fuse. the remaining possibility could be bad socket contacts.

Nov 15, 2009 | 2000 Nissan Maxima

1 Answer

How do change the tail light on a 2007 nissan maxima sedan


I think it is the same as a '04 maxima. Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Jun 30, 2009 | 2007 Nissan Maxima 3.5 Sl Sedan

1 Answer

Need to change the stop light for 05 nissan maxima.


Open the trunk, from the inside remove the side trunk liner (by removing the plastic tabs the liner can be pulled back). Once the liner is pulled back you will need to remove two nuts which secure the tail light in place. Once the two nuts are removed you can start pulling the whole tail light assembly out. There are two other tabs that secure the tail light in place which may give you some resistance but the light should come out without too much force once the two nuts are removed.
Once the tail light is out you can change whatever bulbs you need to.

Jan 09, 2009 | 2004 Nissan Maxima

Not finding what you are looking for?
1998 Nissan Maxima Logo

474 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...