Question about 2004 Audi A4
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Folks, Just found my problem ...... There's a flexible conduit (corrugated rubber sleeve) between the driver's door and the door arch which contains the wiring loom for the drivers door central locking/door speaker/electric windows/mirrors etc....discovered when I slipped off the sleeve that 4 cables in the wiring loom had broken due to repeated flexing when drivers door was opened/closed over the years (2001 Audi A4). Resoldered broken wires and insulated same....now working better than ever again ...ie dashboard back lighting seems brighter than it had been for some time? Also drivers door loudspeaker is back in action again (hadn't noticed that it had gone).
It's kinda difficult to reseat the rubber sleeving correctly after the repair job...will probably use some silicone sealant on the sleeve to ensure that there is no water ingress to wiring loom afterwards. I'm not too impressed with Audi design people after that, should have used cable that has a better flexibility rating (esp on drivers door!).
Posted on Feb 22, 2009
TO FIT A NEW MIRROR FIRST CONNECT THE WIRING PLUGS THEN ENSURE THE FRICTION PIN ON THE BACK OF MIRROR ENGAGES IN THE SLOT (OUTER EDGE OF MIRROR) PRESS FIRMLY AT THE CENTRE OF THE MIRROR TO ENGAGE THE RETAINING CLIP....IF YOU NEED TO REMOVE MIRROR INSERT A FLAT TOOL BEHIND THE LOWER EDGE AND LEVER IT FROM THE CLIPS.. HOPE I WAS OF SOME HELP TO YOU...
Posted on Feb 23, 2009
It must be turned clockwise while being pushed in. The local parts store will have a tool just for this purpose.
Posted on Mar 27, 2009
SOURCE: Audi A4
Not sure if they've changed it but this is what i do for my 99 a4
First remove the screw in the handle pull, it should be next to where your fingers go.
Pull down on the black piece of plastic and remove the screw form the door
Then remove the screws on either end of the door, one near the door jam on top and one near the other side, same place.
Finally pull up then out and the door panel should come out
Hope that helps
Posted on Jun 17, 2009
Inside the boot is a plastic cap embeded in the boot liner. Remove the cap to reveal a screw. Undo the screw and the whole rear light cluster will come away in a sideways and not rearward direction to reveal all of the bulbs. Hope this helps.
Posted on Jul 11, 2009
Tips for a great answer:
Mar 20, 2016 | Audi Cars & Trucks
Aug 26, 2015 | 2000 Jaguar S-Type
Nov 23, 2011 | 2004 Chevrolet Silverado 2500HD
Jun 20, 2010 | 2004 Audi A4
Nov 22, 2009 | 2000 Audi A4
Nov 04, 2009 | 1996 Audi A4
Sep 26, 2009 | 2002 Subaru Outback
Nov 20, 2008 | 2004 Audi A4
199 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: