Question about 2004 Dodge Neon

Open Question

Replace clutch and clutch master cylinder 2004 neon srt4

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 17 Answers

SOURCE: Clutch master cylinder replacement

yes

Posted on Feb 23, 2009

Ad
  • 314 Answers

SOURCE: how to replace clutch

This is not a task to try to do in your driveway! Get a price from a shop. Cost about 200 to 400. Maybe a bit more! Frankster016

Posted on Oct 26, 2008

  • 10 Answers

SOURCE: ford focus st170 clutch master cylinder

To replace the clutch master, you must remove the under hood fuse box and air filter housing assm, then remove the hydraulic line that goes into the inlet port of the clutch master, then inside the car, remove the hush panel/knee bolster panel from under the steering column, and loosen the boilts that retain the brake pedal to the firewall, then remove the two 10mm bolts that secure the clutch master to the brake pedal assm. Reverse procedure ti install, then fill the brake master cylinder with clean fluid, loosen the bleeder screw at the top of the trans, and bleed the clutch as you would the regular brake system, but never pump the pedal, tighten screw, with foot off of clutch pedal open screw and press pedal to floor, then tighten screw before you release pedal, then release pedal loosen screw, etc. until no more air comes out, it may take quite a few times to fully bleed the system.

Posted on Feb 07, 2009

motor1258
  • 6674 Answers

SOURCE: remove master clutch cylinder on 1992 bmw 325i

Perhaps this link will be of some help.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528004a3c7

Posted on Feb 18, 2009

  • 1 Answer

SOURCE: 1999 pontiac sunfire bleeding clutch

my 1999 pontiac sunfire drivers door latch is broke can not close the door. i have it pulled shut? how much will a used latch cost, or even 3 bolts for it? all the auto stores/ jumk yards are closed for me to call

Posted on Aug 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the push rod on the clutch master cylinder keep breaking when trying to bleed the system on our 2001 Dodge Neon.


I think there may be two different types of master cylinders -- one uses a longer push rod than the other. If possible, check that the old part is exactly like the new one. If the old part is not available, try getting a knowledgeable parts person to check several year models up and down from yours to see if a different part number exists.

Oct 02, 2016 | 2001 Dodge Neon

1 Answer

Where to check clutch fluid level on 2004 mini


the clutch fluid reservoir is at the clutch master cylinder or is an extension of the brake master cylinder
look for a hose from the clutch master cylinder to the brake master cylinder reservoir

Dec 28, 2015 | 2004 Mini Cooper

1 Answer

2005 dodge neon srt4, chugs but wont start


I would do a compression test. Chances are the head gasket blew and thats how the coolant entered the cylinders, and how the hose blew. You may need a head gasket replacement.

Mar 09, 2014 | Cars & Trucks

1 Answer

Hydraulic clutch


change the seals in your slave cylinder.

Dec 07, 2013 | Dodge Neon Cars & Trucks

1 Answer

CLUTCH WONT WORK


There is a clutch master cylinder,a clutch slave cylinder,and the fluid.If you press on the clutch pedal and there is no pressure you lost the fluid,if either leak from the master or the slave even the hose line,A rule of thumb the master clutch cylinder and a slave are replaced as pair,

Mar 09, 2012 | 2004 Saturn ION

1 Answer

2001 dodge neon clutch will not build up pressure


fill the clutch master cylinder up and open the slave cylinder zert until fluid is running out of the zert.
then close the zert and have a friend pump the clutch a few times and hold it down to the floor while you reopen the zert a bit and let some fluid run out.
Repeat this two or three times to purge the air out of the system.
Thats it...

Nov 05, 2011 | 2001 Dodge Neon

1 Answer

When i depress the clutch to start my 2004 neon srt4 it wont turn over or do anything. the batteray is good and tested starter it was good to. i have to push start to drive my car. all the power turns on


There is a switch on the clutch pedal. You have to climb down in the floor board to see it. It is a small switch that when you press the clutch it opens a switch and allows you to start the car.


Hope this helps! If so please click YES!!!! Thanks!

Sep 01, 2010 | 2004 Dodge Neon

1 Answer

I push my clutch in on my 03 neon sxt and it will not go into gear while its runing but will go into gear while its not runing


It sounds like your clutch slave cylinder is not working. Check clutch fluid level and try bleeding it. If that doesn't work you will need to replace either the master or slave cylinder.

Sep 19, 2009 | Dodge Neon Cars & Trucks

1 Answer

When installing a clutch on a 05 dodge neon srt4, is the back metal cover on center of the clutch need to bee removed?


YES thats your pressure plate that actuates the clutch disc.

It needs to be replace at the same time the clutch is.

Sep 15, 2009 | 2005 Dodge Neon

2 Answers

Differnece Between 2004 sxt neon and srt4?


the SRT4 and SXT parts are not interchangeable, as they are 2 different drivetrains

Mar 23, 2009 | 2004 Dodge SRT-4

Not finding what you are looking for?
2004 Dodge Neon Logo

Related Topics:

542 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...