Question about 1996 Jeep Grand Cherokee

1 Answer

I lost the lower bolt to the thermostat housing. where can I get the replacement and/or what size is the bolt? thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Bring the bolt you still have and the housing to any hardware store. They can match the diameter and thread pitch. Make sure the new bolt protrudes through the housing the same distance as the one you still have.
if you have a choice because it's not a perfect match, use one a tiny bit shorter, not longer.

Posted on Jun 04, 2010

Testimonial: "thanks "

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are bolt sizes on thermostat housing?


Shop for bolt sizes on thermostat... on Google


ARP 450?7401: ARP Thermost...
$5.70
Summit Racin... Thermostat Housing Bolts...
$9.95
Original Parts... ARP 434?7401: ARP Thermost...
$7.57
Summit Racin... ARP 134?7401: ARP Thermost...
$5.50
Summit Racin... ARP 430?7401: ARP Thermost...
$6.37
Summit Racin...

(4) Search Results

    The Official ARP Web Site ' Thermostat Housing Bolts

    arp-bolts.com/kits/product.php?PL=60

    Automotive Racing Products20 kits found for Thermostat Housing Bolts ... These premium grade bolts are engineered to properly engage the manifold threads and ... Thread Size 1, 3/8?.

    Thermostat housing bolt size questions ' IH8MUD Forum

Dec 05, 2015 | Cars & Trucks

1 Answer

How to get the thermostat housing to disconnect. We have taken all bolts loose but will not come apart.


Not sure if you have the 2.7L or the 3.5L so I'll post for both sizes for you:


2.7L Removal procedures
  1. Drain cooling system.
  2. Remove radiator lower hose from thermostat housing.
  3. Remove nuts from heater tube flange studs.
  4. Loosen starter bolt at heater tube bracket.
  5. Pull heater tube out of thermostat housing and position out of the way.
  6. Remove bolt and two studs.
  7. Remove thermostat housing, O-ring and thermostat.
  8. Remove thermostat housing bolts.

3.5L Removal procedures

  1. Drain cooling system.
  2. Raise vehicle on hoist.
  3. Disconnect electrical connectors from engine oil and power steering pressure switches.
  4. Disconnect radiator and heater hoses from thermostat housing.
  5. Remove thermostat housing bolts.
  6. Remove housing, thermostat, and gasket.
NOTE:
The OEM thermostat is staked in place at the factory. To ensure proper seating of replacement thermostat, carefully remove the bulged metal from the thermostat housing using a suitable hand held grinder. It is not necessary to restake the replacement thermostat into the thermostat housing

May 07, 2011 | 2003 Dodge Intrepid

1 Answer

Want to know whats these codes mean [Engine rpn 704 rpm],[Map sensor 45 kpr], [cool ant temp 141f], [Dtc t caused rreezerrame p1281]. for a 2000 grand cherokee


Hi, the first part is data taken along with the code. The code P1281 indicates the engine is running cold (141 degrees--should be at least 190). Is your temp gage running lower than you are used to? If yes, it may be your thermostat has failed open. I have pasted below instructions for replacing the thermostat. Please let me know if you have any questions, and thanks for using FixYa.


3.7L & 4.7L Engines WARNING Do not loosen radiator drain **** with system hot and pressurized. Serious burns from coolant can occur.


NOTE Do not waste reusable coolant. If solution is clean, drain coolant into a clean container for reuse. If thermostat is being replaced, be sure that replacement is specified thermostat for vehicle model and engine type.

  1. Disconnect negative battery cable at battery.
  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Remove splash shield.
  5. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  6. Remove thermostat housing mounting bolts, thermostat housing and thermostat.

To install:
  1. Clean mating areas of timing chain cover and thermostat housing.
  2. Install thermostat (spring side down) into recessed machined groove on timing chain cover.
  3. Position thermostat housing on timing chain cover.
  4. Install two housing-to-timing chain cover bolts. Tighten bolts to 115 inch lbs. (13 Nm).
    CAUTION Housing must be tightened evenly and thermostat must be centered into recessed groove in timing chain cover. If not, it may result in a cracked housing, damaged timing chain cover threads or coolant leaks.
  5. Install lower radiator hose on thermostat housing.
  6. Install splash shield.
  7. Lower vehicle.
  8. Fill cooling system.
  9. Connect negative battery cable to battery.
  10. Start and warm the engine. Check for leaks.


Removal & Installation, 4.0 liter engine

  1. Disconnect the negative battery cable.
  2. If necessary, disconnect the coolant temperature sensor electrical connector.
  3. Disconnect the upper radiator hose from the thermostat housing.
  4. Remove the attaching bolts and lift the housing from the engine.
jturcotte_407.jpg
Remove the thermostat and gasket.
To install:
  1. Clean all gasket surfaces thoroughly.
  2. Place the thermostat in the housing with the spring inside the engine.
  3. Install a new gasket with a small amount of sealing compound applied to both sides.
  4. Install the water outlet and tighten the mounting bolts to 200 inch lbs. (23 Nm) on V-8 engines and 15 ft. lbs. (20 Nm) on non-8 cylinder engines.
  5. Install the upper radiator hose to the housing and tighten the hose clamp.
  6. Connect the coolant temperature sensor connector to the housing.
  7. Refill the cooling system.

Apr 13, 2011 | 2000 Jeep Grand Cherokee

2 Answers

HOW TO CHANG THERMOSTAT IN COOLING SYSTEM


The thermostat is located in the housing bolted to the block that the lower hose is attached to.

-Remove the lower hose from the housing.
-Remove the two bolts holding the housing to the block (10mm socket will work).
-Remove the housing from the block.

The new thermostat will come with a cardboard tube. Use it to push down and twist the thermostat to release it from the housing. Install the new thermostat into the housing and then reassemble.

Fill the cooling system and start the vehicle. Let it idle until the cooling fan comes on making sure to top off the coolant reservoir as necessary. Then replace the cap and your good to go.

Mar 04, 2011 | 2002 Saturn S-Series

1 Answer

How to change the thermostat


This is for the 2.7L:

2.7L Engine
  1. Disconnect negative cable.

    CAUTION

    Do not remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.

  2. Drain cooling system.
  3. Remove radiator lower hose from thermostat housing.
  4. Remove nuts from heater tube flange studs.
  5. Loosen starter bolt at heater tube bracket.
  6. Pull heater tube out of thermostat housing and position out of the way.
  7. Remove bolt and two studs.
  8. Remove thermostat housing, O-ring and thermostat.
  9. Remove thermostat housing bolts.

To install:

  1. Clean gasket sealing surfaces.

    NOTE

    Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal.

  2. Install thermostat and seal into thermostat housing .
  3. If removed, install two studs.
  4. Install thermostat, thermostat housing and O-ring and bolt. Tighten attaching bolts to 105 inch lbs.(12 Nm).
  5. Lubricate new heater return tube O-ring with coolant.
  6. Position heater return tube flange over two studs. Install nuts.
  7. Tighten retaining nuts to 53 inch lbs.(6 Nm).
  8. Tighten starter bolt to 40 ft. lbs. (54.3 Nm).
  9. Connect the lower radiator hose to the thermostat housing. Install hose clamps.
  10. Refill cooling system.
  11. Inspect for leaks.
  12. Connect negative cable.
This is for the 3.2L and the 3.5L:

3.2L & 3.5L Engines
  1. Disconnect negative cable.

    CAUTION

    Do not remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.

  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Disconnect electrical connectors from engine oil and power steering pressure switches.
  5. Disconnect radiator and heater hoses from thermostat housing.
  6. Remove thermostat housing bolts.
  7. Remove housing, thermostat, and gasket.

    NOTE

    The OEM thermostat is staked in place at the factory. To ensure proper seating of replacement thermostat, carefully remove the bulged metal from the thermostat housing using a suitable hand held grinder. It is not necessary to restake the replacement thermostat into the thermostat housing.

To install:

  1. Position gasket on thermostat and housing.
  2. Install thermostat housing, gasket and mounting bolts onto block. Tighten attaching bolts to 105 inch lbs. (12 Nm).
  3. Install radiator hose.
  4. Install bypass hose.
  5. Connect electrical connectors from engine oil and power steering pressure switches.
  6. Connect negative cable.
  7. Fill cooling system.
  8. Inspect for leaks.
  9. Lower vehicle on hoist.

Nov 01, 2010 | 2002 Dodge Intrepid

2 Answers

Replace thermostat


Two big hoses attach to your radiator. Look for the one that goes back to the TOP of the engine. There is a housing with two bolts in it that the hose connects to. Drain radiator, remove hose. Remove the two bolts. Remove the housing. Thermostat is inside housing or still on engine. It just pulls out. Remove any remaining thermostat housing gasket material from the housing and the engine. Install new thermostat. Should only fit in one way. Install new thermostat housing gasket and the housing. Reattach hose and fill radiator, leaving the cap off. Turn on the car and wait until car gets to warm condition. You will see the water start to move from the radiator to the engine when the new thermostat releases at the proper temperature. Replace the radiator cap and clean up, you are finished.

Oct 09, 2010 | 1993 Cadillac DeVille

2 Answers

Where is the thermostat


Please choose the correct steps for the size of engine that you have:

4.5L & 4.9L Engines
  1. Drain the coolant to a level below the thermostat housing.
  2. It may be necessary to remove the upper air filter assembly on some models.
  3. Remove the 2 bolts securing the upper thermostat housing to the lower housing.
  4. Remove the upper thermostat housing.
  5. Remove the thermostat and O-ring from the lower housing.

280c20b.gif
Thermostat installation—4.5L and 4.9L engines

To install:
  1. Install the thermostat and a new O-ring to the lower housing.
  2. Install the upper thermostat housing to the lower housing. Tighten the thermostat housing bolts to 20 ft. lbs. (27 Nm).
  3. Refill the cooling system using a 50/50 mixture of water and ethylene glycol antifreeze.
  4. Start the engine and check for coolant leaks. Allow the engine to come to normal operating temperature. Recheck for coolant leaks.

4.6L Engines
  1. Drain the coolant to a level below the thermostat housing.
  2. On some vehicles, access is easier if the front-end beauty panel and the air cleaner are removed.
  3. Remove the 2 bolts securing the thermostat housing to the intake manifold.
  4. Remove the thermostat housing.
  5. Remove the thermostat and O-ring from the housing.

57a3857.gif
Thermostat installation—4.6L Engine


3b692a6.gif
Loosen the upper radiator hose clamp at the thermostat housing


d0a7ab0.gif
Remove the upper radiator hose clamp from the thermostat housing


d22f120.gif
Remove the thermostat housing retaining bolts and . . .





d497806.gif
. . . remove the thermostat housing from the engine


c2d4b5e.gif
Separate the thermostat from the housing

To install:
  1. Install the thermostat and new O-ring to the housing.
  2. Install the thermostat housing to the intake manifold. Tighten the thermostat housing bolts to 18 ft. lbs. (25 Nm).
  3. Refill the cooling system using a 50/50 mixture of water and ethylene glycol antifreeze.
  4. Install the air cleaner and beauty panel, if removed.
  5. Start the engine and check for coolant leaks. Allow the engine to come to normal operating temperature. Recheck for coolant leaks.

May 23, 2010 | 1996 Cadillac DeVille

1 Answer

How to replace thermostat


300M, Concorde, Intrepid, LHS, 1998-2004 - Thermostat Removal & Installation 2.7L Engine
  1. Disconnect negative cable.
    CAUTION Do not remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.
  2. Drain cooling system.
  3. Remove radiator lower hose from thermostat housing.
  4. Remove nuts from heater tube flange studs.
  5. Loosen starter bolt at heater tube bracket.
  6. Pull heater tube out of thermostat housing and position out of the way.
  7. Remove bolt and two studs.
  8. Remove thermostat housing, O-ring and thermostat.
  9. Remove thermostat housing bolts.
To install:
  1. Clean gasket sealing surfaces.
    NOTE Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal.
  2. Install thermostat and seal into thermostat housing .
  3. If removed, install two studs.
  4. Install thermostat, thermostat housing and O-ring and bolt. Tighten attaching bolts to 105 inch lbs.(12 Nm).
  5. Lubricate new heater return tube O-ring with coolant.
  6. Position heater return tube flange over two studs. Install nuts.
  7. Tighten retaining nuts to 53 inch lbs.(6 Nm).
  8. Tighten starter bolt to 40 ft. lbs. (54.3 Nm).
  9. Connect the lower radiator hose to the thermostat housing. Install hose clamps.
  10. Refill cooling system.
  11. Inspect for leaks.
  12. Connect negative cable.
3.2L & 3.5L Engines
  1. Disconnect negative cable.
    CAUTION Do not remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.

  2. Drain cooling system.
  3. Raise vehicle on hoist.
  4. Disconnect electrical connectors from engine oil and power steering pressure switches.
  5. Disconnect radiator and heater hoses from thermostat housing.
  6. Remove thermostat housing bolts.
  7. Remove housing, thermostat, and gasket.
    NOTE The OEM thermostat is staked in place at the factory. To ensure proper seating of replacement thermostat, carefully remove the bulged metal from the thermostat housing using a suitable hand held grinder. It is not necessary to restake the replacement thermostat into the thermostat housing.
To install:
  1. Position gasket on thermostat and housing.
  2. Install thermostat housing, gasket and mounting bolts onto block. Tighten attaching bolts to 105 inch lbs. (12 Nm).
  3. Install radiator hose.
  4. Install bypass hose.
  5. Connect electrical connectors from engine oil and power steering pressure switches.
  6. Connect negative cable.
  7. Fill cooling system.
  8. Inspect for leaks.
  9. Lower vehicle on hoist.

Hope helps with this (remember rated this) Good luck.

Feb 02, 2010 | 2001 Chrysler 300M

2 Answers

How do I change the thermostat on a 2001 Pontiac Grandam SE?


HI
To get to the thermostat you need to remove air cleaner box assembly from the throttle body and move it out of the way. Next, remove the nut at the throttle body that holds the steel tube that goes to the heater hose, remove all hoses that connect to this tube and raise it out of the way. Remove the steel line that goes to the radiator surge tank from the thermostat housing. Now the fun part. With a 13MM box end wrench, loosen the lower bolt from the thermostat housing. A 13 mm socket will remove the top bolt. Remove the thermostat cover and remove the thermostat. Reverse to install.

Please chek this link for replacing the thermostat...

http://www.pfyc.com/supportfiles/tstat/tstat.htm

Thanks for contacting fixya.com

Nov 11, 2009 | 2001 Pontiac Grand Am SE

1 Answer

I need to know where the location of the thermostat is on a 1999 chrysler 300m so i can replace


The 2.7L engine lower radiator hose, connects to the thermostat housing.

To Remove:
1.Disconnect the Negative battery cable.
(Engine COLD!)
  1. Drain cooling system.
  2. Remove radiator lower hose from thermostat housing.
  3. Remove nuts from heater tube flange studs.
  4. Loosen starter bolt at heater tube bracket.
  5. Pull heater tube out of thermostat housing and position out of the way.
  6. Remove bolt and two studs.
  7. Remove thermostat housing, O-ring and thermostat.
  8. Remove thermostat housing bolts.
To install:
A.Clean gasket sealing surfaces.
B.Install thermostat with the bleed valve located at the 12 o'clock position, between tabs on seal.
  1. Install thermostat and seal into thermostat housing .
  2. If removed, install two studs.
  3. Install thermostat, thermostat housing and O-ring and bolt. Tighten attaching bolts to 105 inch lbs.(12 Nm).
  4. Lubricate new heater return tube O-ring with coolant.
  5. Position heater return tube flange over two studs. Install nuts.
  6. Tighten retaining nuts to 53 inch lbs.(6 Nm).
  7. Tighten starter bolt to 40 ft. lbs. (54.3 Nm).
  8. Connect the lower radiator hose to the thermostat housing. Install hose clamps.
  9. Refill cooling system.
  10. Inspect for leaks.
  11. Connect negative cable.
3.2 and 3.5L engines:
Disconnect the battery cable. (Again engine COLD)
  1. Drain cooling system.
  2. Raise vehicle on hoist.
  3. Disconnect electrical connectors from engine oil and power steering pressure switches.
  4. Disconnect radiator and heater hoses from thermostat housing.
  5. Remove thermostat housing bolts.
  6. Remove housing, thermostat, and gasket.
The OEM thermostat is staked in place at the factory. To ensure proper seating of replacement thermostat, carefully remove the bulged metal from the thermostat housing, using a suitable hand held grinder. It is not necessary to restake the replacement thermostat, into the thermostat housing.

To Install:
  1. Position gasket on thermostat and housing.
  2. Install thermostat housing, gasket and mounting bolts onto block. Tighten attaching bolts to 105 inch lbs. (12 Nm).
  3. Install radiator hose.
  4. Install bypass hose.
  5. Connect electrical connectors from engine oil and power steering pressure switches.
  6. Connect negative cable.
  7. Fill cooling system.
  8. Inspect for leaks.
  9. Lower vehicle on hoist.
From AutoZone Repair Guides

I feel this way, I can give you an accurate description, and have taken into account your safety.

May 12, 2009 | 1999 Chrysler 300M

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...