Question about 1994 Toyota Pickup

2 Answers

Cna i adjust athe clutch in a 1994 toyota pick-up

Can i adjust the clutch in a 1994 toyota pick-up 4x4

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 60 Answers

The linkage cable before the trans should have an adjustment nut on it. This controls the fork assembly movement. adjust the linkage to remove the pedal free play and this will also tighten the clutch.

Posted on Jun 05, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Toyota Expert
  • 178 Answers

I think you'll find that you have a hydraulic clutch. Here's a link to the manual for a '93, clutch section:
http://myweb.dal.ca/is353832/93fsm/clutch/2checkand.pdf

Posted on Jul 14, 2010

  • JeB
    JeB Nov 21, 2010

    The above link is no longer good ... new site hosting the manual here:http://www.ncttora.com/fsm/1993/index.ht...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 toyota pickup


No, this is a hydraulic clutch and the only adjustment may b on the pedal linkage for free travel to the master cylinder. It sounds as though you may have a bad clutch master cylinder or defective slave cylinder.

Apr 26, 2014 | 1994 Toyota Pickup

2 Answers

I have a 93 Toyota pick up 4x4 standard transmission. Sometimes when I go to reverse, there is a grinding noise, which won't let me shift into reverse. I then need to turn off the vehicle, then engage....


Could be the clutch.
Reverse and first do not have gears that line up like the others do. So if the clutch is not disengaging all the way, they will grind.

Dec 13, 2012 | Cars & Trucks

1 Answer

Adjustment of clutch on 1994 pickup


The only clutch adjustment you can make is peddle free play. There's an adjustable rod between the top of the peddle and the clutch master cylinder:
http://www.ncttora.com/fsm/1993/clutch/2checkand.pdf

Aug 19, 2011 | 1994 Toyota Pickup

1 Answer

How do i adjust the tps on my 1994 toyota pick up-? 4 cylinder?


http://www.4crawler.com/4x4/CheapTricks/TPS/index.shtml

Apr 07, 2011 | 1994 Toyota Pickup

1 Answer

How do you adjust the clutch on 1994 toyota pickup?


The only adjustment you have is pedal free play. The rod attached to the end of the clutch peddle has a threaded adjustment and a stop nut to hold it in place. Free play should be about 1/2" measured at the pedal.

Oct 15, 2010 | 1994 Toyota Pickup

1 Answer

1994 toyota pickup 4x4 22re 4 cl. I replace the engine and clutch. Onces the truck is run for about 30 mins. I find it stiff in getting to ist gear after a stop. I also sometimes hear the gear grinding...


It sounds like your clutch isn't releasing properly. Do you need to adjust the pedal free play or bleed the hydraulics? If that doesn't fix it you may need take another look at the clutch you put in.

Sep 30, 2010 | 1994 Toyota Pickup

1 Answer

I need help changing out the master cylinder in my '94 toyota 4x4 pickup truck. It is a 5speed, i have already changed out the slave cylinder and installed the master cylinder but i still can not get the...


did you bleed the system?? you must bleed the system from the clutch slave. if this has been done, I need more info!! How does the clutch pedal feel, is the clutch slave engaging at all??

Sep 27, 2010 | 1994 Toyota Pickup

1 Answer

What all needs to be replaced when replacing the clutch on a 1994 toyota 4x4 truck?


clutch disc,pressure plate,throw out bearing,and pilot bearing for sure then it is a smart thing to replace shifter bushings, and even the rear main seal and be sure to have the flywheel machined ...please rate this

May 05, 2010 | 1994 Toyota Pickup

1 Answer

Can not find the clutch on the engine a toyota


the clutch is between the engine and gearbox .take off the gearbox and you will see it between the pressure plate and flywheel.

Jul 14, 2009 | 1991 Toyota Pickup

1 Answer

Rear manual brake adjustments keeps rusting in place


Good day;
A good way to stop this is to use anti-seize. You can get it at any parts store.
hope this helps

cheers

Sep 18, 2008 | 1994 Toyota Pickup

Not finding what you are looking for?
1994 Toyota Pickup Logo

1,144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...