Question about Hyundai Excel

1 Answer

My engine shuts off at 3500 rpm and i read in a forum that someone experienced it also he had his timing chain replaced, my km reading is at 135k, can this possibly solve my problem?

Posted by on

  • jerico.117 Jun 04, 2010

    thanks a lot

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

What you are guessing (timing chain) is on right track. In this case we have to look at the Variable Valve Timing Control system.
Valve Timing Control
1) The PGM-FI system monitors the Valve Timing Electronically Controlled (VTEC) System. By monitoring various engine sensors the ECM can determine when to activate the hydraulic components of the VTEC rocker assembly to engage VTEC and similarly can verify this function by monitoring the VTEC pressure switch.
2) The VTEC usually kicks in at about 3,000 to 3,500 rpm so if the PCM sees it's not working, it limits engine rpm. A code should set in the PCM but it might not be a 'hard' enough failure to set a code.
3) You have to be very careful when checking this system since actuating the VTEC system at the wrong time could cause severe engine damage. I would recommend taking it to a Dealer and letting them drive it with their scan tool connected so they can monitor the VTEC operation in real time and see exactly what it is exactly doing, or not doing.
Thanks and keep updated for any more query.You can rate this solution and show your appreciation.


Posted on Jun 04, 2010

  • jerico.117 Jun 04, 2010

    hi, my unit is a 2004 model starex crdi, when the car is not running i can rev up to 4000 even 5000 rpm, the engine doesnt shut off, but when i drive it and it reaches 3500 rpm the engine shuts off, whats the difference when i am running and when i am just parked?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change timeing chain on 1997 nissan maxima


4 posts now to the TOYOTA forum.
and not one states the ENGINE option,
nobody can help with wrong form , nor engine option in car.

open FSM and read.
or login to alldata.com and read.
you will need to know ENGINE TYPE.

Feb 22, 2014 | 2006 Toyota Camry

1 Answer

Lost oil pressure in a 1999 540i and timing chain noise


from the book the oil pump is driven by a chain from the crankshaft. It is very possible that the oil pump has come loose and thrown/broken the pump chain. It will require a sump removal to check it out. recheck the oil level as what you read may have been a froth level . there is no reason for extra oil unless it was overfilled to start with or there is water contamination ( white /grey oil)

Nov 29, 2013 | 1997 BMW 318

3 Answers

Sebring 2004 engine knocking


Well it could be something in the timing components but I doubt it.
Chances are its a connecting rod or piston.

Feb 28, 2013 | 2004 Chrysler Sebring

1 Answer

Toyota Belta (Yaris Sedan) 2007 RPM Variation


Do the throttle body cleaning and idle speed re-learning procedure.

Dec 18, 2012 | 2007 Toyota Yaris 1.3

1 Answer

We are looking to buy a 2003 Mazda 6 S I was wondering if this engine a V6 has a timing belt or chain thanks Mike


Reading Topic: Timing Chain?? Both the 4 cylinder and 6 cylinder use timing chains. These chains are pretty much service free and should last the life of the vehicle. Borrowed from http://forum.mazda6club.com/mazda6-atenza/121169-timing-chain.html

Jan 11, 2011 | 2003 Mazda Mazda6

1 Answer

NEED TO KNOW WHEN TO CHANGE TIMING BELT OF A DODGE DURANGO 2005


Here's a helpful link for your vehicle, 2.5L engine:
http://www.ehow.com/how_4509007_check-replace-timing-chain-dodge.html

For the larger engines, try this link for info.
http://www.dakota-durango.com/forum/showthread.php?t=67844
From what I read, it doesn't seem that the timing chain is a regular replacement item.

For your question, the forum where this link resides would be a great place to search around. You'd be surprised how many people have already had a similar question. The link to this forum is: http://www.dakota-durango.com/forum

If this has helped, please give me the appropriate thumbs up! Thanks, and good luck!

Aug 15, 2010 | Dodge Durango Cars & Trucks

1 Answer

I have a 1984 dodge ram pick up with the mitsubishi motor and i was woindering if the timeing was belt or chain


1984 years came with the 2.0L, 2.6L gasoline and 2.3 diesel engines.

It's most likely a timing belt, but read further for more info. Recommended to be replaced at 60,000 miles (96,000 km) on gasoline engines and on diesel engines at 50,000 miles (80,000 km).

The 2.0 L Engine have two timing belts. One connects the crankshaft and camshaft, the second one drives the right silent shaft.

The 2.6L engine has a timing chain and a silent shaft chain.

Please check to see which particular engine you have and refer to the above for your answer.

Jun 29, 2009 | 1984 Dodge Ram 50

1 Answer

I have a Peugot Partner 1.4 . I was driving


you have a stripped and or binding speedometer cable or gear :)

Jun 22, 2009 | 2005 Peugeot 405

1 Answer

RPM problems


It is the new variable cylinder management the same thing happened on my 2003

Apr 07, 2009 | 2004 Dodge Ram 3500 Truck

1 Answer

1991 vw golf gti- RPM stop working!


judging by the amount of km it has done i would say the rpm drive is faulty, this measures the amount of rotation in the camshaft and shows the "revolutions per minute". when this goes faulty it stops the read out on the dial, so you want to be looking for a device that measures the speed that the engine is turning, if you have, replace it and it should solve the problem

Nov 20, 2008 | 1988 Volkswagen GTI

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...