Question about 1991 Honda Accord

1 Answer

No AC because of intake what can i do? I just got my honda accord ex 4 dr auto. It came with an Intake and because of it i dont have AC live in cali and it gets kinda hot. Anyway i can still get ac on it?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 416 Answers

Unfortuntately, from what i believe you are saying, the air intake is actually occupying the space where the blower and compressor for the ac goes. The biggest thing is that you cant just put the ac on the other side of the engine compartment unless you dont mind welding new brackets to hold the units and run extra long hoses accross the engine and through the passenger firewall to the interior cooling system.

I would recomment figuring out something completely different with the into. Its not a race car for crying out loud, and frankly, back when the intake was installed, they owner probably just didnt care and got the one he thought was the "coolest". I say go K&N oem and remove all that junk so you can install your ac



Posted on Jun 04, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

04 accord ex 2.4 sedan - Why does air blow through my vents when the A/C and everything is turned off?

Look for a vacuum hose that may be cracked, leaking or completely off the engine intake manifold.

Oct 17, 2016 | 2004 Honda Accord 2.4 EX

1 Answer

Will not start when engine is hot

check coil packs and check all wiring under hood for fraying or bad connection,some of the accords have problems with failure of the distributor and occasional problems are failures of the igniter and the intake manifold,failure of the distributor or the ignitor may prevent your vehichle from starting,failure of the intake manifold applies to DX, LX and EX models only

Jan 16, 2013 | 2003 Honda Accord

1 Answer

Wher is the air charge temp sensor located on a 97 honda accord 4 cyl.


Feb 03, 2011 | 1997 Honda Accord

2 Answers


Clean your fast idle thermo valve (fitv) if that dont Work try cleaning idle Air control valve (iacv) you can go to google images to see where they are located on the intake manifold if you dont know And also if you dont know you can search google on how to clean these parts. Slightly dirty fitv was my problem cleaned it no prob. Since.

Apr 20, 2010 | 1995 Honda Accord

1 Answer

Were is pcv valve located on 1989 honda accord lx 4 cylinder

You PCV will be located on the center, rear engine area. It is just below the intake manifold, between the block and intake manifold. The valve is housed in the vacuum hose that runs halfway into the engine.

Jan 02, 2010 | 1989 Honda Accord 4 Door

1 Answer

Metal coolant pipe goes from behind water pump to thermostat how to change

Replacement it when engine cold is better by steps below. - Remove Air filter - Remove intake duct - Remove thermostat housing. - Pull-out metal coolant. end-of pipe has not bolt or nut. Some Ex. photo
More info. Honda Accord 1992 Repair Manual

Dec 19, 2009 | 1992 Honda Accord

1 Answer

Cant find where the knock sensor is located on a 2006 Honda Accord ex 6 cyl is?

I believe it is located under intake runner on passenger side like the 6 in an.MDX. It has to attach to the engine block to pickup vibrations from engine knock.

Oct 16, 2009 | 2006 Honda Accord

1 Answer

Looking for locatio of PCV valve on 2001 Accord EX 3.0?

it should be located in the rear valve couver pushed into a rubber gromet with a hose running from it to the intake tube going to air box if not there then in the front valve couver same deal with a gromet and a hose running to the intake tube going to the air box. thats were 90 percent of ur pcv valves are located on most car trucks and suv's. im not real fimilyer with the 3.0 honda moter but i hope this helps

Aug 01, 2009 | 1992 Honda Accord

1 Answer

Where is the IAt sensor on a 1999 honda accord 2.0 vtec es

Ive not been inside that model accord, but the IAT or AIT sensor serves the same function on my car. for me now its zip tied to a mundle of wires that lead to the O2 sensors. that is because of my aftermarket intake. for you if it was like mine then the box on the intake that holds the airfilter should have a small tube leading to the front of the car, these are used to guid in air, also on mine this is where they placed the AIT sensor, its small and dont go for the bigger box or oval shaped sensor befor the airbox. that probably your MAF sensor. so look and the end of the intake. if you dont see a sensor there take a picture of your engine bay, near the intake. maybe we could locate it with that.

Jul 08, 2009 | 1999 Honda Accord

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides