Question about 1999 Chevrolet Silverado 1500

2 Answers

Fuse good told that brake electric wire bad. what

1999 chev k1500 subaban has no brake lights. fuse good told that brake electric wire bad. what is it and where is it?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What is electric brake

Posted on Oct 05, 2010

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

There is a "Switch" that is pressed by your Breaking foot lever of most vehicles. Grab a flashlight and look for it, Turn the key on and see if you get any voltage to this switch. If you do get voltage to this switch, have someone watch the break lights while you jump the 2 wires. If you have power to it and jump it but still no lights, You must replace the faulty wiring.

Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 1999 Chev. Suburban. Problem is with brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next?


WITH A GOOD FUSE TESTER, TEST ALL THE FUSES FUSEBOX UNDER THE HOOD & INSIDE THE VEHICLE. IF THE FUSES ARE ALL GOOD WITH THE TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE LIGHT SWITCH GOOD ? THE ORANGE WIRE FEEDS THE BRAKE LIGHT SWITCH, THE WHITE WIRE PUTS POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT SWITCH IS GOOD, BY THE WAY THE BRAKE LIGHT FUSE MAY BE LABELED" STOP", THE FUSE LABELED" BRAKE" IS FOR THE ABS SYSTEM. TO CHECK THE TURN SIGNAL SWITCH FOR BRAKE LIGHTS, REMOVE THE PLASTIC COVER FROM UNDER THE STEERING WHEEL, PRESS ON THE BRAKE PEDAL, PUT THE TESTER IN THE SMALL YELLOW WIRE, THEN THE SMALL GREEN WIRE. IF THERE IS NO POWER IN EITHER WIRE, THE TURN SIGNAL SWITCH IS BAD.

Jan 11, 2011 | 1999 Chevrolet Suburban

2 Answers

1999 lumina chev brake light stop no work


Check the brake light fuse if its ok then check the bulbs if they are ok then check the brake light switch. Good luck

Jan 03, 2011 | 1999 Chevrolet Lumina

2 Answers

98 silverado no brake lights


The first thing is to check for power at the brake light switch,there should be power to one wire the other wire power up when pedal is pushed, this will tell you if it a power loss if theres no power to switch, if theres power to switch and through switch with pedal pushed then loog at the connect for signal switch its near column big connector as brake light power goes through switch you may have fryed that wire have some watch lights as you wiggle but this is only if you have power at brake switch. if theres no power then double check fuses even in the engine compartment, mostlikly it a fuse the wiring should not of burnt with a fuse in line, theres fuses in engine fuse box that also control lights.

Jul 15, 2010 | 1998 Chevrolet K1500

1 Answer

1999 GMC Suburban, K1500 4WD. Top brake light bar


third light is different circuit. saftey reason check fuses grounds wires

Oct 10, 2009 | 1999 GMC Suburban

1 Answer

1999 chev. cavalier


should just be a bad brake switch on the pedal (or could just need adjusted but probably not). remove switch and see if continuity from one terminal to the other changes from open to closed when you depress the plunger on the switch manually (a general multimeter that measures ohms can do this)

Sep 29, 2009 | 2001 Chevrolet Cavalier

1 Answer

1999 Chev. Cavalier no brake lights. Bulbs and fuses O.K.


check the brake light switck .its under the dash above the brake pedle

Jul 17, 2009 | 1999 Chevrolet Cavalier

1 Answer

98 chev blazer wont start or make any noises...


Listen for a click from under the steering column when you turn the key on. If you hear no electrical click then your ignition switch could be bad. If you hear an electrical click the you starter soleniod is bad.

Jul 13, 2009 | 1998 Chevrolet K1500

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...