Question about Nissan Pulsar

1 Answer

I have entered the wrong code to many times on my

I have entered the wrong code to many times on my radio. Now it just comes up err, what can i do. Thanks Raelene

Posted by on

  • raemck Jun 04, 2010

    I own a nissan pulsar 2004 sedan

  • Anonymous Mar 19, 2014

    I have entered the wrong code too many times

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

I would try to disconnect the battery for a few minutes and hope that it (forgets) that you have entered the wrong code too many times.

You may want to list Year, Make, and Model to catch someone more qualified/experienced.

Posted on Jun 04, 2010

  • raemck Jun 04, 2010

    Thank you for your advice i will be doing that first thing in morning. Thanks again Raelene

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My odyssey 2003 is showing code err for the entertainment


Does the radio work at all. or is the cd player the only issue.? most of the time you need to enter a radio code to unlock the radio. If you enter it wrong to many times it will display error on the display.if you dont know the code then you can call the dealership and get the code after you do the following below to get the serial number.
Press and hold 1 and 6 on the radio while still holding the 1 and 6 press the power button. At this time it will read off serial number
SOUTHERNELECTRONICS.COM

Apr 02, 2015 | 2003 Honda Odyssey

1 Answer

Getting a code e on radio


If it displays Err or E, it's because the wrong code was entered too many times. The unit is now locked out. You will need to go to Honda and get the correct code for the unit, remove power from it to reset it, then enter the correct code. The sticker in the glove box was for the factory unit. If it was replaced at some point, the code is different.

Apr 20, 2014 | 1998 Honda Accord

1 Answer

How to use radio controls after code set


if you have the code (you say you do) turn radio on, push the code, radio should come on automatically (here is my code it will work on yours 2145) so 1 turn radio on. err code will show dont worry about it. 2. punch in 4 digit code.3. complete code will flash 3 times. 4. radio will be fully functional, use as normal. if you enter code wrong an Err will display for a few sec. COde will then display. repeat procedure 1-3.

Apr 20, 2013 | 2000 Daewoo Nubira

1 Answer

I have a 2003 acura tl type s and i have the radio code but when i put the code in it just says err and i also have the radio serial # but i dont know what to do. Can you please help? Thank you


try disconnecting the battery wait 5 min and try again.. if you punch in the wrong code to many times it will come up as err ..hope this helps.

Dec 02, 2009 | 2003 Acura 3.2TL

1 Answer

Ive got a factory radio reading of i have code how do i reset to put in code


When you turn on the radio, it will say "codE" on the display. You have the 4-digit code number for your radio, to enter the first digit, press the "1" button on the radio the number of times until the first digit matches. For example, if your code is "2156" then, press radio preset button 1 two 2 times, then press radio preset button 2 one time, then radio preset button 3 five 5 times and finally preset button 4 six times.
THEN if the display is correct (should show 2156 in this example), press TAPE button. You should hear a beep and the radio should be working. If you make a mistake and enter a wrong code, the display will show "Err". You have 3 tries to get this correct or the radio may be toast. These are the steps for the stock radio in my 1995 GSX and they've worked for me each time I've lost battery power. Good luck!

Apr 09, 2009 | 1995 Mitsubishi Eclipse

1 Answer

Acura car stereo lock codes my stereo needs a code is a Acura 3.0CL now it says err-3 can some one help


err-3 means you have entered incorrect anti-theft radio code more that three times.If you do not have radio code you can most of the time find the code card tucked away in the owners manual pouch.(looks like a bussiness card)If you are unable to find card you would have to pull radio from dash and retrive stereo serial number,which is on bottom side of radio.once you have s/n you can take s/n to any acura dealership(has to be a dealer)and they can get radio code for that stereo through Honda Corp.once you have correct radio code you will need to first unplug radio,or disconnect battery to reset radio memory,then type in radio code.again if entered incorrectly 3x ,radio would need to be reset again too clear error codes.good luck!

Mar 30, 2009 | 1998 Acura CL

3 Answers

Need to input my radio code on 2005 Honda Civic


ok your radio displays ERR , OK 3 options let it sit for an hour turned on , to reture to CODE display , or pull the radio fuse out for a minute and put it back in , returning to the CODE display , or disconnect the battery for a minute , returning to the CODE display . you got the ERR display because the code was wrong or not entered correctly , make your choice of getting the radio back to the CODE display by 1 of those 3 choices , while the radio displays CODE , use the preset buttons , if the first number of your code is 4 , then press the #1 preset button 4 time , when the first number has been input , put the 2nd number in by pressing the #2 prest button , if 2nd number of code is 8 , press the # 2 preset button 8 times till the # 8 is displayed , and so on . you see where this is giong ? when you have entered all the numbers correctly you will have you radio back . when you say you have the radio code , good luck ! were rooting for ya .

J5

Jan 19, 2009 | 2005 Honda Civic

2 Answers

Nissan stereo sy702 with constant err flashing after flat battery


WRONG! Leave the radio on for 1 hour using the key and accessories to reset then enter the pin. You get the pin from nissan customer service in your area but you need to supply your vin/chassis number.

To enter the pin you press buttons 1-4 corresponding to the number of the pin eg. pin is 1023, press button 1 once, 2 ten times, 3 two times, 4 three times

Jan 03, 2009 | 1992 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...