Question about 1995 Chevrolet Lumina

2 Answers

To replace window switch for driver window, must I remove the whole inside door panel on drivers door ? Are there diagrams available online to remove the interior panel ?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 110 Answers

Hello there:
you don't need manual removal is easy is what you need to do is look for screws along the bottom of the door panel remove then and remove. look for screws behind the door handle remove it and in the part of the panel that you would grab too close the door there should be a screw there need to remove the screws and gently pull out on the door panel.. look for the wiring connector remove it then there will be some squeeze tabs push together and lift the switch out replace in reverse hope this helps you out sincerely D.Jones

Posted on Jun 04, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

YOU DONT HAVE TO REMOVE DOOR PANEL.ALL HOLDING SWITCH A SCREW THAT GOES THROUGH SWITCH INTO DOOR HANDLE.REMOVE THE SCREW PRY AND PULL UP THE SWITCH.

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix power windows on 2001 chrysler sebring


if no door or window switches work in entire car start by checking FUSES , then by spraying compressed air into the switches on the drivers door panel whilst moving switches back and forth. then spray some WD40 or electronic componet cleaner into edges of switches whist moving switches hoping they come back to life. then pulling open drivers door rubber harness cover where it enters car. look for wires in the loom that are cracked and broken. this is likely.as wires bend each time door is opened. then remove drivers door panel and test then remove loom connector from door frame and use OHM /volt meter to find broken wires or switches in drivers door problems in drivers door. check for voltage at window motor first. . buy whole new door panel with wiring harness and switches at Pick n pull. if that does not work ..buy a haynes manual and look at wiring schematics. NEVER GIVE UP. NEVER BUY NEW PARTS.

Aug 31, 2014 | 2001 Chrysler Sebring

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

Drivers door completly in-op,mirror,door lock,all windows,window lockout.truck inside light doesnt even come on when door opened and when unlocking with keyless remote,all doors open except drivers


Inside the drivers door is a drivers door module (computer) which controls all the things you stated. The module is actually the window switch assembly as a whole. Either it has a problem with the data line and can't communicate with the other modules or it has lost its power or ground. Check all fuses, first. Remove the door panel and check the obvious, for cut wires etc. They can even fail internally if they get water into them (window down). You will have to have the BCM (body control computer scanned for codes. It will tell you if the drivers door module is recognized on the data line.

Jan 28, 2011 | 2005 GMC Sierra

1 Answer

How to remove drivers door panel on 1999 ford escort. I need to repair the windows switch for the drivers side. My window is in the down position and won't come up when I push the button. All other windows...


Remove the front door pull cup screw 1152a96.gif

Remove the screw cap and the screw from the inside door handle and slide the handle rearward to disengage the hook from the inner sheet metal.
  • Disconnect the inside door handle from the front door latch remote control link
37470b2.gif

Remove the two-piece pushpins from the front door trim panel (23942).
2a1605a.gif

NOTE: Use a commonly available spring loaded trim pad removing tool with a long thin nose to prevent damage to the door trim panel.
Release the seven front door trim panel bullet nose fasteners and push inboard, then upward to release the front door trim panel.
  • If equipped, disconnect the master window regulator control switch electrical connector
cc0d2af.gif

Remove the retainer from the master window regulator control switch panel.
  1. Pull outward on the cup retainer tabs and remove.
  1. Remove the master window regulator control switch electrical connector from the retainer
ab8ff6c.gif

Jun 05, 2010 | 1999 Ford Escort

1 Answer

2002 Cougar passenger side window switch - remove & replace


remove the door panel switch comes off from inside

Jul 23, 2009 | 2002 Mercury Cougar

1 Answer

Subaru Outback 2005 - Driver side door/window switch panel - driver side window no longer works - everything else OK


The switches in Subarus are made by Nissan believe it or not. They are not interchangeable. Anyway, I suspect you have a bad window switch. You can pickup the whole bank of swiches or replace just the one. Do a search on ebay for your part.
Has this car had body damage on the driver's door? You could have a cut wire inside the door.

Apr 19, 2009 | 2005 Subaru Outback

1 Answer

Window one operate but can operate passenger side from driver


Ford was notorious for bad switches on the drivers window control panel. But before you replace it pull the whole inner door panel off. You will have to unplug the switch panel to do it... check the connections on the window motor itself, then check and clean the connector that plugs into the inner door panel and the switch panel itself, If these dont fix it check an auto boneyard for a replacement switch... AAlso if you are savy with automotive electrical, CAREFULLYcheck the motor operation with a jumper wire replacing the switch to ensure it isnt a bad motor... most likely it is the switch but Murphy's law has a whole subset of rules for automotive electrical applications...

Apr 13, 2009 | 1998 Ford F250 SuperCab

3 Answers

Lincoln Town Car 1999 driver side window switch


The plastic piece around the switches comes off and the entire cartridge comes out. It just snaps into the armrest. My 98 continental having similar issues. All other switches work, drivers window just quit. Tried a new cartridge did not fix problem.....still working on it.

Apr 06, 2009 | 2000 Lincoln Town Car

1 Answer

HOW DO I REPLACE THE DRIVER SIDE POWER MIRROR ON AN 98 F-150?


Remove the sail panel,the little panel on inside of door at the mirror.
Remove the window regulator switch plate, pry up on the front of it with a small pick or screw driver. Disconnect the electrical connectors.
Remove the top door trim panel screw that is behind the sail panel you removed.
Remove door trim panel screw at window regulator switch plate opening.
Remove door trim panel screw in the courtesy lamp housing. Remove the courtesy lamp lens.Remove the screw.
Remove the inside door handle trim cover.
Remove the bolt.
Remove the inside door handle.
Lift upward to remove the front door trim panel.
Remove the courtesy lamp.
Turn the courtesy lamp bulb socket one quarter turn and remove.
Disconnect the power mirror electrical connector.
Remove the three outside rear view mirror nuts.
Remove the mirror.

Jan 31, 2009 | 1997 Ford Expedition

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...