Question about 1995 Chevrolet Camaro

1 Answer

I need to see how to change a window motor in a 1995 Chevy Camaro.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

I'm sorry, can't contact with your chat request because I having other question open; I suggest check this proceduro for GM Camaro/Firebird 1993-1998 Repair Guide...

Window Regulator and Regulator Motor
REMOVAL & INSTALLATION
(see Figures 1 and 2)

  1. Remove the door trim panel and inner panel water deflector.
  2. Raise the window to half-up position and hold in place by inserting a rubber wedge door stops at the front and rear of the window between window and inner panel.
  3. Remove the rear guide channel and inner panel cam channel.
  4. Punch out the center pins of the regulator rivets; then drill out the rivets using a 1 / 4 in. (6mm) bit.
  5. Move the regulator rearward and disconnect wire harness from the motor (if equipped). Disengage the roller on the regulator lift arm from glass sash channel.
  6. Remove the regulator through the rear access hole.
I need to see how - ebf548d.jpg

Fig. 1: Front door window regulator mounting

CAUTION If electric motor removal from the regulator is required, the sector gear must be locked in position. The regulator lift arm is under tension from the counterbalance spring and could cause personal injury if the sector gear is not locked in position.
  1. Drill a hole through the regulator sector gear and backplate and install a bolt and nut to lock the sector gear in position.
  2. Using a 3 / 16 in. (5mm) bit, drill out the motor attaching rivets and remove the motor from the regulator.
00f7a3c.jpg

Fig. 2: Locking the sector gear on the window regulator motor



To install:

  1. To install the motor to the regulator. Use a rivet tool, J-29022 or equivalent, and install 3 / 16 in. (5mm) rivets or 3 / 16 in. (5mm) nuts and bolts. Remove the bolt and nut used to secure the sector gear in position.
  2. Place the regulator through the rear access hole into the door inner panel. If the electric regulator is being installed, engage the wire connector to motor prior to installing the regulator to the inner panel.
  3. Locate the lift arm roller into the glass sash channel.
  4. Using rivet tool J-29022 or equivalent, rivet the regulator to the inner panel of the door using 1 / 4 in. (6mm) 1 / 2 in. (13mm) aluminum peel type rivets (part No. 9436175 or equivalent). If the rivet tool is not available, use the following nut and bolt method:
    1. Install U-clips on the regulator at the attaching locations. Be sure to install the clips with clinch nuts on the outboard side of the regulator.
    2. Locate the regulator in the door inner panel. If the electric regulator is being installed, connect the wire connector to the regulator motor.
    3. Locate the lift arm roller in the glass sash channel.
    4. Align the regulator with clinch nuts to holes in the inner panel.
    5. Attach the regulator (and motor) to the door inner panel with 1 / 4 -20 x 1 / 2 in. screws (part No. 9419723 or equivalent) into 1 / 4 in. (6mm) nuts with integral washers. Tighten the screw to 90-125 inch lbs. (10-14 Nm) torque.
  5. Install the inner panel cam channel and rear guide channel.
  6. Remove the rubber wedge door stops at the front and rear of the window between window and inner panel.
  7. Install the inner panel water deflector and the door trim panel.

Hope helps (remember rated this).

Posted on Jun 04, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 9 Answers

SOURCE: I have a 1991 Chevy

http://92b4crs.tripod.com/86wiring/86wiringindex.html hope this site helps

Posted on Jan 17, 2009

  • 56 Answers

SOURCE: replace 1994 chevy camaro window motors

the best thing that u can do is go to the store and buy the repair manual for your car they usually run between $15 and $20 and they will have step by step instructions and pics....not only is it good for this but pretty much anything else u want to know about ur car..hope this helped

Posted on May 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power windows on a 1995 camaro going up and down slowly


Your power window motors are getting old, need to be replaced soon.

May 26, 2010 | 1995 Chevrolet Camaro

1 Answer

Passenger power window for a '96 chevy camaro wont go down or up


Mine wont either actually, you just need to take out the door panel and change out that motor. Buy the book for that car at your local autoparts store and it will tell you how to change it out step by step.

Oct 24, 2009 | 1996 Chevrolet Camaro

1 Answer

1997 RS pwr window DS.......rolls up and down


I had the same problem with the pwr window PS recently. Took it to the Chevy dealer and they replaced the window motor and said that there was a short in the window motor (cost $270). It worked fine for two weeks... Now, suddently, there is no power to neither windows, the radio nor the IP dimmer. I am guessing I have now the short on the DS motor window.

Oct 22, 2009 | 1995 Chevrolet Camaro

1 Answer

Need an engine diagram for a 1995 chevy camaro 6 cylinder , 3.4.


go to your chevy dealer parts dept and they should be able to print one for you,you'll need your vin #.

Sep 14, 2009 | 1995 Chevrolet Camaro

2 Answers

1995 chevy camaro 3.4 V6


maybe the radiator is plugged or the water pump isnt moving water very good

Aug 30, 2009 | 1995 Chevrolet Camaro

1 Answer

How do I replace a 1995 Chevy Camaro Window (Driver side)


i also replaced my window on a camaro first you have to pop all the plastic circular notches out under the material closest to the door , remove the vinyl ( or leather ) unscrew the all the screws so you can see a opening of the interior of the door and pop the screws out of the window connecting to the hinges and you should be able to pull the window out the trick is actually re-aligning the hinges with the proper holes its best to do that part with two people it takes some patience but can be done im pretty sure theres a camaro guy around somewhere (always is) if not , may be frustating i suggest put it in the shop , this requires a flathead screwdriver , a pliers of some sort to yank the window out if it falls , and a star screwdriver

Jul 10, 2009 | 1995 Chevrolet Camaro

1 Answer

Replace 1994 chevy camaro window motors


the best thing that u can do is go to the store and buy the repair manual for your car they usually run between $15 and $20 and they will have step by step instructions and pics....not only is it good for this but pretty much anything else u want to know about ur car..hope this helped

May 22, 2009 | 1994 Chevrolet Camaro

1 Answer

1995 camaro just bought the car driver side


sounds like nu window motor replacement time if you get voltage to motor ( test light ) its motor

Apr 12, 2009 | 1995 Chevrolet Camaro

3 Answers

1995 fuel pump relay


located under the left kick panle.

Oct 02, 2008 | 1995 Chevrolet Camaro

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

1,385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...