Question about 1994 Mercury Cougar

1 Answer

Remove the factory stereo face - 1994 Mercury Cougar

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 22 Answers

You will need two Ford removal tools. You can get them at any auto parts store and even some walmarts. You can make some using a coat hanger cut into a U shape. (Just use the bottom corners.)

Stick each end of the U into the holes on each side of the radio. There is a clip in there and you can feel it disengage.

Press outwards, (away from each other), and slowly pull the radio out.

Once you get the edge of the face out you can grip it and pull it on out.

The tools work better as they are harder metal and grip the radios better.

They normally cost 3-5 bucks.

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the radio out of the car for repair?


Cadillac Allante Bose Stereo Removal and Repair - YouTube

? 4:44
https://www.youtube.com/watch?v=gnoCICSMdto
Mar 2, 2009 - Uploaded by Factory Car Stereo Repair
Cadillac Allante Bose Stereo Removal and Repair. Factory Car Stereo Repair ... Cadillac Allante Promo 1988? ... Restricted Mode: Off. History

88-94 Cadillac Radio - YouTube

? 1:44
https://www.youtube.com/watch?v=IQyA-i_G_Lw
Feb 25, 2012 - Uploaded by mrzhvac
Cadillac Fleetwood Car Stereo Removal 1993 - 1996 - Duration: 3:10. Factory Car Stereo Repair 3,801 views. 3:10. 1990 Cadillac Brougham ...

Car Stereo Removal - Cadillac Allante Car Stereo Removal ...




Jan 08, 2016 | 1988 Cadillac Fleetwood

1 Answer

2000 chevy venture. How do I install a JVC stereo?


Check your local Walmart or Auto Parts store for the correct wiring kit to change your factory radio to a JVC...the kit is inexpensive and provides professional connections that are easy to trace...remove the face plate around your factory radio, and you will see 4 corner bolts that hold the radio in place...be sure the antennae connections are the same size. Hope this helps.

May 15, 2015 | Chevrolet Cars & Trucks

1 Answer

2003 E250 Would like to replace original basic stereo radio (only two speakers in front doors at present) with JVC radio (that can connect to 4 speakers). Need radio removal directions and type of speaker...


There are 2 holes on each side of the face of the factory radio. Special U-shaped rods slide into the holes to unlock the clips and pull it out. You can buy them from a parts store for a few bucks or use a metal coat hanger and make them yourself (all they do is push straight in the holes). To install a (JVC) radio, you can buy an adapter plug from a car stereo shop or best-buy that connects to the factory harness.

Jan 25, 2011 | 2003 Ford E250

1 Answer

How to remove radio from 1993 lincoln continental


  • 1 Lift the Town Car's hood and disconnect the negative battery cable from the negative battery terminal. Loosen the cable's clamp with the wrench and lift it from the battery. Set the cable aside and move to the inside of the Lincoln.
  • 2 Pry the trim panel from the stereo assembly.
  • 3 Insert the Ford DIN removal tools into the two holes at either side of the stereo face. Push the tools into the openings until they lock into place. Pull outward on the tools while pulling the stereo from the Lincoln's stereo dock.
  • 4 Disconnect the stereo wiring and antenna cable from the outlets on the back of the factory stereo to finish the stereo removal.


  • Dec 08, 2010 | Lincoln Continental Cars & Trucks

    1 Answer

    How do you remove factory stereo to install afermarket one on a 2009 ford f450 and is there a tool required to do so


    Yes two U shaped release tools go in the four small "holes" on the face plate, two holes on each side.

    Oct 24, 2009 | 2009 Ford F-450 Super Duty

    1 Answer

    How do I remove the factory stereo on a 1993 Ford F350?


    there are 4 holes in the face of the unit,2 on each side,an inch or so apart.use two stiff wires bent into a U shape or an inexpensive pair of OEM RADIO REMOVAL TOOLS.push tools into holes to release retaining clips,pull tools outward and slide radio out.

    Oct 13, 2009 | 1993 Ford F350

    2 Answers

    Want To Install New Stereo


    You need to remove the front face on the dashboard...either you can "feel" your way through this, or you can get a basic manual like haynes that contains instructions. Most radios have accessory packages available that consist of an adapter harness and face plate which will make the job go a bit easier.R&R instructiona are not complicated but too long to write out.
    Good luck!

    Apr 23, 2009 | 2003 Jeep Wrangler

    1 Answer

    1998 Ford Escort Stereo Removal


    there are two holes in either side of the face plate. There is a tool (shaped like a pair of elongated horseshoes) that you can use. But I have gotten them out without the tools by taking 4 small nails inserted in the holes and a slight outward pressure to compress the clips while pulling on them.
    Once you get it out, you will see the mechanism and smile.

    Nov 19, 2008 | 1998 Ford Escort

    1 Answer

    Radio installation in 1983 dodge ram van


    remove screws from dash face, remove dash face. two 10mm bolts hold stereo in place,remove bolts, gently pull stereo out. unplug stereo. install new stereo by reversing the directions

    Oct 19, 2008 | 1983 Dodge Ram Wagon

    1 Answer

    Removing Car Stereo from ford Festiva (1998/9 model)


    yes it was not avail. because its a aspire after 94. and you can pick up a ford stereo removal tool at local parts store, that is if you have 2 holes on both sides of the radio

    Sep 15, 2008 | 1993 Ford Festiva

    Not finding what you are looking for?
    1994 Mercury Cougar Logo

    140 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mercury Experts

    yadayada
    yadayada

    Level 3 Expert

    77169 Answers

    fordexpert

    Level 3 Expert

    5575 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22265 Answers

    Are you a Mercury Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...