Question about 1994 Acura Integra

1 Answer

1. i have a 1994 acura integra gsr , what is the key code alarmer for it. 2. how do you tap into the stock alarm system to hook a new current system. 3. how do you clean off rust on your rims.

Posted by on

  • dieselbear68 Jun 06, 2010

    thanks VERY VERY much you inform me well! THANKS again. You were very helpful in answering my question I asked about my ACURA INTEGRA GSR..... TWO THUMPS UPPPP!"Reisdos"

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

1.) key code retrieval is only available electronically through a professional scanner

2.) depends on what you want to "tap"
most aftermarket systems are NOT designed to tap into the factory system and instead work independent to OEM

3.) If you have aluminum rims rust should not be the issue but instead corrosion.... once corrosion has started NOTHING will stop it with out complete stripping, sanding and re-polishing of the rim
There are a lot of specialty shops that specialize in this trade but will cost you $50+/rim and you can usually get some nice replacements for a few dollars more









Posted on Jun 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I permanently disable a DEI Automate car alarm on our 1999 Acura Integra.


Just remove it. It shouldn't be too hard, take all the parts and harness out, reconnect any cut wires and wrap any exposed wires with electrical tape.

May 31, 2015 | 1999 Acura Integra

1 Answer

My 1995 Acura integra alarm keep on going off. I try to stop it with the car alarm but it wont shut down so I disonnet the car batery and now my car wont start. Help!!! )


under the left side theirs a lit button or togg switch and put the battery back on a check the lit button with the key in it right b4 start and hold the button down and see if it goes off or check the alarm remote and see if the battery dead

Nov 12, 2011 | 1995 Acura Integra Coupe

1 Answer

Replacing stock oxygen sensor on 01 acura integra gsr with bosch oxygen sensor color matching chart is wrong


get OEM O2 sensor and not a universal, then there is no need to cut wires just clip it on. you can go right to Honda and the will sell you one

Mar 16, 2010 | 2001 Acura Integra

1 Answer

Do I need a special tool to install a crankshaft timing gear on a 1994 acura integra gsr


get a book from auto parts store on your car. its a must have for deep repairs. it will tell you what tools to use. good luck. joeyj35@live

Feb 12, 2010 | 1994 Acura Integra

2 Answers

Need code for 1999 acura integra radio


Hi:

You have to go to your Integra dealer to get that, due to the fact it is an anti theft code. Of ten they also need the number off the top of the radio too.

This keeps thieves from selling stolen radios...

Feb 03, 2010 | 1999 Acura Integra

1 Answer

My clifford concept 400 car alarm isn't working on my 96 acura integra. With the key on the radio and power antennae will work. The headlights come on but the dash clock does not nor do the wipers or power...


are you sure its the alarm? and do you have the red key for the car? hondas have a immobilizer and they quite often lose the code by themselfs hence you need the red key to reprogram it. If you dont have it then it may be quite expensive.

If you have the key to disable the alarm I would try that first, small key on the side of the alarm box turn to off and try it again.

Hope this helps

Jan 15, 2010 | Acura Integra Cars & Trucks

2 Answers

Acura Integra ID


there should be a sticker around the driver door that will tell you. if that fails you can always write the VIN down and search it most times the basic info is free (ie: make/mode/MFG year)

May 02, 2009 | 1994 Acura Integra

1 Answer

I just replaced cylinder head and now my car wont start up


Is timing correct?

First make sure you are getting spark.

Some questions you need to know are what year head is the LS. Did you use the LS Intake manifold and throttle body. Problem is if you didnt use a OBD1 LS and it is OBD2 or OBD0 The Throttle position sensor wont allow the engine to start. Same with the Distributor, because your crank angle position sensor is in your distributor and a OBD1 ECU can communicate withe OBD0 or OBD2

If it is all OBD1 Then I would do a compression and Cyl. Leak down test.

Nov 29, 2008 | 1994 Acura Integra

Not finding what you are looking for?
1994 Acura Integra Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...