Question about 1992 Oldsmobile Cutlass Supreme

1 Answer

I have a dieing 92 Cutlass

I have a ''92'' Olds Cutlass Supreme with a 3.1 and AOD. This car will stall out EVERY time I try to stop the car from any speed. If I stop VERY slowly, it will not die.
I have replaced the IAC, CKP, inj #6, checked fuel pressure and is @ 42psi while idling. I thought maybe a vac brk issue, but used pinch-off pliers to eliminate the vac possibility and the same problem.
This car will stall from roughly 12-1300 rpm's as if you just turned off the key. It will immediately restart and drive away, but at the next stop sign, it will die.
It will die at every single stop unless you stop ridiculously slow.
I thought possibly trans downshift issue, but I never have to get out of 1st gear to get the same result.
I've looked to see if something is shifting under decel, but cannot see any problems or connectors being pulled apart.
This problem will NOT occur on a lift. The weight of the vehicle has to be on the wheels and the car in motion.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

I have seen problems with the TCC (torque converter clutch) solenoid in the trans cause problems like that, might have it checked.

Posted on Jun 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What makes the fuel pump not kick on on a 92 Oldsmobile Cutlass


There is a red wire close to the battery in the front. It's not connected to anything. Apply positive voltage and that will run your pump for testing purposes.

Dec 08, 2015 | Oldsmobile Cars & Trucks

1 Answer

1992 olds cutlass supreme wont accelerate when pushing the gas pedal


Check oil first, Low oil sensor will shut down if more than a quart low. Change fuel filter, could be fuel starvation, change the air filter. stopped up air filter will put MAF sensor out of range. PERFORM OBDII SCAN SOON.

May 19, 2017 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Olds cutlass supreme keeps stalling. i drove it to ludington just fine and on the way back it just died. had it towed home and tried to start it up again at home and it fired right up several times and ran...


TRY CHANGING FUEL FILTER,COULD BE CLOGGED FUEL FILTER,FUEL PUMP FAILING,FUEL COULD BE CONTAMINATED WITH WATER.IF FUEL SYSTEM OKAY,CHECK FOR SPARK AT SPARK PLUGS,COULD BE FAULTY IGNITION MODULE OR FAULTY IDLE AIR CONTROL VALVE I WOULD HAVE VECHICLE CODE SCAN FIRST BEFORE SPENDING MONEY.

Oct 13, 2011 | 1989 Oldsmobile Cutlass Supreme

4 Answers

1991 olds cutlass supreme with a 3.1 v-6 the engine


I am having a similar problem, but there is no check engine light. It seems that mine dies at the light or running, if the rpm's drop. I am wondering if the Idle air control valve is bad or possibly the ERG valve?

Feb 03, 2010 | 1991 Oldsmobile Cutlass Supreme

2 Answers

92 olds cutlass supreme turn signal broken


Start by checking the fuses that's simple
than relay than bulbs
last you may have to remove the steering wheel and than replace the entire signal assembly those are pretty much all your options so start with 1 and work your way down the list

Sep 24, 2009 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Best way to repair a starter solenoid on a 1992 Olds Cutlass Supreme


take a propane torch heat the aluminum where the screws go into starter screws will come out

Oct 20, 2008 | 1992 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
1992 Oldsmobile Cutlass Supreme Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...