Question about 2001 Chevrolet Lumina

1 Answer

Cant get the alternator off i removed two bolts and it is still stuck i need pictures of the alternator and its bolt assembly

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 403 Answers

Autozone.com sign up its free then click on repair manuals you will find all of your info there....good luck

Posted on Jun 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of alternator in 03 Altima 3.5 l


If you can't get a pair of 4'' vise grips to lock onto the bolts you might have to drive deep well impact sockets on them with a hammer,(use extension bars from your socket set to reach the bolts which you will need to replace once they have been removed)

Sep 25, 2012 | 2003 Nissan Altima 3.5 SE

2 Answers

Where is the voltage regulator located?


The voltage regulator is built into the Alternator.

May 13, 2011 | 2003 Ford Expedition

1 Answer

How to install a alternator on a 94' cutlass


3.1L Engines - 1998-93 VEHICLES
(see Figures 5, 6, 7 and 8)
  1. Disconnect the negative battery cable.
  2. If necessary for access to the alternator, remove the air cleaner assembly.
  3. Remove the serpentine belt
  4. Label and detach the electrical connector(s) from the back of the alternator.
zjlimited_923.jpg

Fig. 5: After removing the serpentine belt, detach the electrical connector from the rear of the alternator

  1. Remove the rear and front attaching bolts, and unfasten the brace-to-alternator bolt.
zjlimited_924.jpg

Fig. 6: Unfasten the front and rear mounting bolts...

zjlimited_925.jpg

Fig. 7: ... then remove the brace-to-alternator bolt

  1. Carefully remove the alternator assembly, making sure all wires are disconnected.
If the alternator brace is removed, the studs must be retightened before installation or damage to the brace may result.


zjlimited_926.jpg

Fig. 8: Alternator (generator) removal and installation - 1992 3.1L engine shown (click image for zoom)

To install:

  1. Position the alternator into the mounting bracket.
  2. If necessary, attach the battery positive lead and nut to the alternator output terminal. Tighten to 71 inch lbs. (8 Nm).
  3. Install the brace-to-alternator bolt, but do not tighten at this time.
  4. Install the front and rear mounting bolts. Tighten the bolts as follows:
    1. Long bolt to 35 ft. lbs. (47 Nm)
    2. Short bolt to 18 ft. lbs. (25 Nm)
    3. Bracket bolt to 18 ft. lbs. (25 Nm)
  5. Check that tightening of the brace bolts did not bind the alternator.
  6. Attach the electrical connector(s).
  7. Install the serpentine belt
  8. If removed, install the air cleaner.
  9. Connect the negative battery cable.

Hope helps (remember to rate this answer).

Mar 23, 2011 | 1994 Oldsmobile Cutlass Supreme

1 Answer

I need a diagram and instuctions to replace a alternator


Disconnect the negative battery cable with a socket wrench. Release the tension on the accessory drive belt so that you can remove the drive belt from the pulley.Take off the mounting bolt on the right side of the alternator with a socket wrench and remove the bracket for the power steering hose. Remove the mounting bolts on top of the alternator, the front passenger wheel and tire assembly and the front fender splash shield. Remove the alternator splash shield with a socket wrench and take off the inspection cover for the torque converter. Mount a tool to hold the flywheel so you can remove the crankshaft pulley bolt and crankshaft pulley. Lower the alternator so you can unplug its electrical connections. Disconnect the crankshaft position sensor and Oxygen sensor connector. Remove the lower alternator mounting bolt and B+ connector nut to remove the alternator. Install the new alternator assembly by reversing the above procedure. Use a torque wrench to tighten the B+ connector nut to 71 inch lbs. and the lower alternator bolt to 18 foot pounds. Torque the crankshaft pulley bolt to 74 foot pounds, the upper alternator bolts to 18 foot pounds and the nut for the power steering hose bracket to 13 foot pounds

Mar 02, 2011 | 2003 Ford Taurus

2 Answers

Is fixing the ultinator yourself an easy job


  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
91072p19.gif

For easiest access to the alternator assembly, first remove the splash shield mounting fasteners ...
Click to Enlarge 91072p18.gif

... then swing it out of the way for access to the alternator assembly
Click to Enlarge 91072p17.gif

View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal

  1. Tag and disengage the alternator wiring.

It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.

  1. If equipped, remove the front alternator assembly mounting plate.
91072p09.gif

Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly
Click to Enlarge 91072p10.gif

Remove the front alternator assembly mounting plate from below the vehicle
Click to Enlarge

  1. Unfasten the alternator mounting and pivot bolts and remove the alternator.
  2. If installing the original alternator assembly, push out the pivot bushing as illustrated.
91072p11.gif

After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud
Click to Enlarge 91072p08.gif

Remove the two alternator bracket-to-engine mounting bolts
91072p12.gif

Remove the alternator and mounting bracket assembly from the vehicle
Click to Enlarge 91072p14.gif

If re-installing, the alternator has a pivot bushing on the pivot arm that should be pushed out before installation
91072p15.gif

Mount a C-clamp and 18mm socket on the alternator pivot bushing ...
91072p13.gif

... then compress the C-clamp until it pushes the alternator pivot bushing out

To install:

  1. Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
  2. If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
  3. If removed, install the front mounting plate.
  4. Engage the alternator electrical connections.
  5. If removed, install the splash shield.
  6. install the drive belt and attach the negative battery cable.
  7. shinehutt_58.gifshinehutt_57.gifshinehutt_56.gifshinehutt_55.gifshinehutt_54.gifshinehutt_53.gifshinehutt_52.gifshinehutt_51.gif
the job is akward ive incl as much info you need to repair yourself

plz comment reply if need more info

Jan 20, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Batter wont charge, jeep idles for about a min then dies. Need to replace alternator, but dont know how


I have the same Jeep model 5.2L V8, to replace the alternator, check the next procedure...

Once the determination is made that the alternator is at fault, off vehicle testing can be used to determine the defective component inside the alternator.
See Figures 1 through 11
  1. Disconnect the negative battery cable.
  2. Remove the drive belt.
  3. If necessary, remove any splash shielding for easier access to the alternator.
zjlimited_482.jpg

Fig. 1: For easiest access to the alternator assembly, first remove the splash shield mounting fasteners ...

zjlimited_483.jpg

Fig. 2: ... then swing it out of the way for access to the alternator assembly

zjlimited_484.jpg

Fig. 3: View of the alternator electrical connections-(A) battery positive, (B) field terminals, (C) wire harness hold down, (D) ground terminal

  1. Tag and disengage the alternator wiring.
It may be necessary to remove the alternator and mounting bracket from the vehicle as an assembly.
  1. If equipped, remove the front alternator assembly mounting plate.

zjlimited_485.jpg

Fig. 4: Remove the six nuts and bolts that secure the front mounting plate to the alternator assembly

zjlimited_486.jpg

Fig. 5: Remove the front alternator assembly mounting plate from below the vehicle

  1. Unfasten the alternator mounting and pivot bolts and remove the alternator.
  2. If installing the original alternator assembly, push out the pivot bushing as illustrated.
zjlimited_487.jpg

Fig. 6: After removing the alternator assembly front mounting plate, remove the front engine-to-alternator bracket mounting stud

zjlimited_488.jpg

Fig. 7: Remove the two alternator bracket-to-engine mounting bolts

zjlimited_489.jpg

Fig. 8: Remove the alternator and mounting bracket assembly from the vehicle



To install:

  1. Mount the alternator to the brackets with the nuts and bolts. Tighten the two mounting bolts and nuts to 40 ft. lbs. (54 Nm).
  2. If the alternator and mounting bracket were removed as an assembly, install the assembly into the vehicle.
  3. If removed, install the front mounting plate.
  4. Engage the alternator electrical connections.
  5. If removed, install the splash shield.
  6. stall the drive belt and attach the negative battery cable.

Hope this helps (remember to rate and comment this answer).

Jan 16, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Changing alternator



REMOVAL & INSTALLATION 2.2L Engines
CHRYSLER ALTERNATOR

  1. Disconnect the negative battery cable.
  2. Label and disconnect the wiring (for easy installation).
  3. Remove the air conditioning compressor drive belt, if equipped.
  4. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt.
  5. Remove the bracket and mounting bolts.
  6. Remove the pivot bolt and nut.
  7. Lift the alternator from the vehicle.

When lifting the alternator out of the vehicle on some years with A/C, clearance may be restricted by the condenser cooling fan assembly or the A/C compressor and mounting bracket assembly, if so, removal of one of these items will be necessary.
To install:
  1. Position the alternator against the engine.
  2. Install the pivot bolt and nut.
  3. Install the mounting bracket bolts, and adjusting bolt.
  4. Install drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

BOSCH ALTERNATOR
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring and label for easy installation.
  3. Remove the air conditioning compressor drive belt.
  4. Loosen the alternator adjusting bracket locknut and adjusting screw. Remove the alternator belt.
  5. Remove the bracket locknut and mounting bolt.
  6. Remove the pivot bolt and nut.
  7. Remove the alternator from the engine.

To install:
  1. Position the alternator against the engine.
  2. Install pivot bolt and nut.
  3. Set the mounting bracket in place and install the bracket mounting bolt and locknut.
  4. Install the drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

Jan 02, 2011 | 1994 Plymouth Voyager

1 Answer

Changing alternator


REMOVAL & INSTALLATION
2.2L Engines
CHRYSLER ALTERNATOR
  1. Disconnect the negative battery cable.
  2. Label and disconnect the wiring (for easy installation).
  3. Remove the air conditioning compressor drive belt, if equipped.
  4. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt.
  5. Remove the bracket and mounting bolts.
  6. Remove the pivot bolt and nut.
  7. Lift the alternator from the vehicle.
When lifting the alternator out of the vehicle on some years with A/C, clearance may be restricted by the condenser cooling fan assembly or the A/C compressor and mounting bracket assembly, if so, removal of one of these items will be necessary.

To install:

  1. Position the alternator against the engine.
  2. Install the pivot bolt and nut.
  3. Install the mounting bracket bolts, and adjusting bolt.
  4. Install drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

BOSCH ALTERNATOR

  1. Disconnect the negative battery cable.
  2. Disconnect the wiring and label for easy installation.
  3. Remove the air conditioning compressor drive belt.
  4. Loosen the alternator adjusting bracket locknut and adjusting screw. Remove the alternator belt.
  5. Remove the bracket locknut and mounting bolt.
  6. Remove the pivot bolt and nut.
  7. Remove the alternator from the engine.
To install:
  1. Position the alternator against the engine.
  2. Install pivot bolt and nut.
  3. Set the mounting bracket in place and install the bracket mounting bolt and locknut.
  4. Install the drive belts and adjust to specification.
  5. Tighten all the mounting bolts and nuts.
  6. Connect all alternator terminals.
  7. Connect the negative battery cable.

2.5L Engines
2.5L engines were equipped with either Chrysler or Bosch alternators.

  1. Disconnect the negative battery cable.
  2. Remove the drive belts.
  3. Remove the adjusting bracket-to-engine mounting bolt.
  4. Remove the adjusting locking bolt and nut, then remove the mounting bracket.
  5. Position the alternator to gain access to the wiring.
  6. Disconnect the wiring and label for easy installation.
  7. Remove the pivot bolt, nut, and washers.
  8. Remove the alternator assembly from the engine.
To install:
  1. Position the alternator assembly against the engine.
  2. Loosely install the pivot bolt, washers, and nut.
  3. Attach all wiring connectors to the alternator.
  4. Position the mounting bracket in place, then install engine mounting bolt.
  5. Loosely install the adjusting locking bolt and nut.
  6. Install the drive belts, and adjust to specification.
  7. Tighten all mounting bolts and nuts.
  8. Connect the negative battery cable.

2.6L Engines
2.6L engines were equipped with Mitsubishi alternators.
  1. Disconnect the negative battery cable.
  2. Disconnect the wiring and label for easy installation.
  3. Remove the adjusting strap mounting bolt.
  4. Remove the drive belts.
  5. Remove the support mounting bolt and nut.
  6. Remove the alternator assembly.
To install:
  1. Position the alternator assembly against the engine, then install the support bolt.
  2. Install the adjusting strap mounting bolt.
  3. Install the alternator belts and adjust to specification.
  4. Tighten all the support bolts and nuts.
  5. Connect all of the wiring terminals to the alternator.
  6. Connect the negative battery cable.

3.0L Engines
The 3.0L engines were equipped with either the Nippondenso or Bosch alternators.
  1. Disconnect the negative battery cable.
  2. Install a 1 / 2 in. breaker bar in the tensioner slot. Rotate counterclockwise to release belt tension and remove poly-V belt.
  3. Remove the alternator mounting bolts (2).
  4. Remove the wiring and remove alternator.
To install:
  1. Position the alternator onto the engine, then install the wiring.
  2. Set the alternator against the mounting bracket and install the mounting bolts.
  3. Rotate the tensioner counterclockwise and install poly-V belt.
  4. Connect the negative battery cable.

3.3L and 3.8L Engines
The 3.3L and 3.8L engines were equipped with the Nippondenso alternators.
  1. Disconnect the negative battery cable.
  2. Remove the alternator drive belt, by relieving the tension on the dynamic tensioner.
  3. Loosen the nut on the support bracket at the exhaust manifold, do not remove it.
  4. Remove the alternator tensioner/power steering bracket bolt.
  5. Remove the tensioner stud nut and remove the tensioner.
  6. Remove the alternator mounting bolts.
  7. Remove the power steering reservoir from the mounting bracket, do not disconnect the hoses, and position it out of the way.
  8. Remove the alternator support bracket bolts. Remove the intake plenum to alternator bracket bolt and remove the alternator support bracket from the engine.
  9. Remove the alternator from the engine and disconnect the electrical leads.
To install:
  1. Install the alternator in position on the engine and connect the electrical leads.
  2. Install the alternator support bracket, tighten the retaining bolts to 40 ft. lbs. (54 Nm).
  3. Install the power steering reservoir on the mounting bracket.
  4. Install the alternator mounting bolts, tighten the bolts to 40 ft. lbs. (54 Nm).
  5. Install the tensioner and tensioner mounting stud. Install the retaining nut on the exhaust manifold.
  6. Install the alternator belt, insert a 1 / 2 in. extension into the square hole in the tensioner and turn the tensioner. Tighten the tensioner bolt.
  7. Connect the negative battery cable.

Hope this help (remember comment and rated this).

Apr 01, 2010 | 1994 Dodge Caravan

2 Answers

Alternator removal on 87 acura integra


you need to loosen and remove the alternator mounting bolts and remove the V - belt and alternator assembly.

Dec 05, 2009 | 1987 Acura Integra

2 Answers

Alternator


Loosen the upper bolt from the top and remove. From the bottom remove the adjuster bolt and remove. You'll have to remove the CV axle and remove the alternator from the bottom of the car. Not a very good design as you may already be aware of.

Jun 20, 2008 | 1993 Honda Accord

Not finding what you are looking for?
2001 Chevrolet Lumina Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...