Question about 2005 Suzuki Forenza
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: p0496 engine code 2005 suzuki
The ECM or computer needs a reflash done to it. The code is for the EVAP system. Takes over a hour to check the EVAP system and to reprogram the computer. Then the idle speeds need to be relearn. I know, I work on them. Don
Posted on Jul 25, 2009
there is no dip stic on the forenza no need to go to the dealer and pay for it simply jack the entire car off the ground enough to get yourself under it make sure u support it with appropriate stands. you can check the fluid by removing the plug from the side of the trans u will need a special tool for this u can get from an auto parts store after removing the plug check to make sure the fluid is right to the brim of the plug hole then turn the car on and shift through the gears R,D,1,2,4 and then back again hold in each gear for about 5 sec then turn the car off crawl back under and check again . if low add a little at a time until its filled u can get a small hand pump with a tube on it from auto store u put this in a quart of trans fluid makes the job alot easier . as for the other problem it is you Trans range sensor $65 dollars from the dealer or $45 from OEMsuzukiparts.com not very hard to change Hope this helps
Posted on Oct 11, 2009
hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart
Posted on Feb 10, 2010
Testimonial: "Really Fast Reply with very good information. THANKS!!"
Tips for a great answer:
Sep 06, 2016 | 2005 Suzuki Forenza
Jul 03, 2014 | 2005 Suzuki Forenza
Mar 17, 2013 | 2005 Suzuki Forenza
Jan 24, 2013 | 2004 Suzuki Forenza
Mar 03, 2011 | 2005 Suzuki Forenza
Feb 09, 2011 | 2005 Suzuki Forenza
Jul 20, 2010 | 2005 Suzuki Forenza
Apr 09, 2010 | 2005 Suzuki Forenza
Sep 27, 2009 | 2005 Suzuki Forenza
164 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: