Question about 1997 Plymouth Voyager

1 Answer

All guages do not work gas, tach, fuel, odometer, and temp. Everything else works fine. Checked fuses there ok.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 6,674 Answers

Have a look at this posting regarding same issue.

http://www.fixya.com/cars/t4620088-when_van_gets_warm_gauges_go_out_not

Posted on Jun 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tac and speedometer not working. What's problem?


Jeep XJ it is.
the Cluster is a computer. brain,
a stand alone display.
fuse 16 in PDC (cluster memory fuse)
and fuse 9 in JB . runs it. JB is cab fuse box.

so what works in the cluster, all things, but not speed or tacho.
engine runs ok
scan tool show no DTC errors.?
all warning lights in cluster work? at self test key?????

if the PCM can not comm, to the cluster, the cluster
can not show tach or speed, can't , and cant update odometer either
does the odometer roll moving>? i bet not

the cluster is a stand alone unit, with puter brain (processor)
fuel guage work?

if the scan tool shows U codes or C codes and comm errors
that must be addressed first. (cause)
see?
you cant fix cars, with out a $5 scan tool, cant. why not buy one
and use it?
ask how, 1000's of choices here... and more.


Feb 14, 2015 | 2000 Jeep Cherokee

1 Answer

Instruments don't work, key stuck in ignition, doesn't shift correctly


Sounds like you need a new car.
With joking aside, the problem with your speedo, tach, gas guage, temp gauge and odometer can probably be one of two things. Check your fuses. If they are fine you may need to replace your cluster panel. I had to have the entire thing changed over my speedo not working right. It was not cheap. You might want to check the relay box under the hood. Does your transmission leak? Check the fuses and relay on it also. Get a new ignition switch and replace the old one if your key is stuck. You can try WD40 on that key but don't expect any miracles. The bearings are likely shot. Sorry I posted all of this bad news. Good luck.

Jan 05, 2014 | 1998 GMC Jimmy

1 Answer

Tach & speedo not working


Had same problem with my 2000 dodge stratus 2.4 liter and transmission would not shift out of 1st gear. Solution was ignition fuse under the hood was blown, one side of fuse working, replaced 10 am fuse everything works, tach, speedometer, gas gauge and transmission started back to shifting.

May 27, 2010 | 1996 Oldsmobile Achieva

1 Answer

97 Dodge Neon, Dash guages not working? The


I know your fuses look good but try replacing the fuse with a new one.

Aug 27, 2009 | 1997 Dodge Neon

1 Answer

Dash guages quit working. Gas, temp, tach and


Try disconnecting battery for couple minutes and see if it starts working again I have done that in the past

Aug 05, 2009 | 2000 Chrysler Town & Country

1 Answer

1997 SAAB 900s speedometer and tachometer not working


Remove the instrument panel form the dash. Pull the back off and resolder resistor R13 on the back circuit board. This is a fairly delicate job and requires a fine pointed soldering iron. This fixed the Tach, Odometer readout, and fuel guage but not the speedometer in my 85 900 s.

Any ideas on the speedometer?

Feb 28, 2009 | 1997 Saab 9000

1 Answer

Chevy cavalier 2005 speedometer stuck not working


That Cluster will work But, You will have to get an Installation kit if you want the Tach to work. Everything else will hook up the Same. You have a Distribution Box (Fuse Box) Under the Hood on the Drivers Side, There is a Fuse in it for the Speedo. Inside the Cover to the Box is the Fuse Diagram or in the Back of the Owners Manual.

Jan 08, 2009 | 1991 Chevrolet Cavalier

1 Answer

Speedo,Tach and fuel guage not working


common problem with speed sensor failure

Dec 28, 2008 | 1999 Volkswagen Beetle

Not finding what you are looking for?
1997 Plymouth Voyager Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...