Question about 1993 Isuzu Amigo

1 Answer

I just recently bought a 1993 Amigo, Isuzu and I am having problems with the way it is running. It has a new motor, clutch, and converter on it . the problem is it sat stored for 5 yrs. it seems there is not a constant flow of gas getting to the carberator,the seller said everything is good it just needs the carb cleaned,maybe and the gas that was stored in it has already ran through the tank. it hesitates upon accelleration and decelleration, then sometims just bogs down to the point of still running but no power. Is it the fuel pump? Or the accellerator in the carb? It is a 5-speed,4 cylinder, either a 2.3 or a 2.6. Thank you, Tonia

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Isuzu Master
  • 2,100 Answers

It could be a bunch of things, but let's assume it is the fuel, Water or crud in the gas tank will usually make the engine just cut right out and come right back, If it runs some what, and you can hear the fuel pump come on when you turn the key, the fuel pump should be ok, only a pressure test will tell you more. Fuel filter might be clogged, but the fuel sitting in the carb for five years is the biggy. It dries out and turns into rock, especially in the jets, the bowl usually turns into jelly, I would get some gas treatment in the tank, and some carb cleaner in the spray can, this is the easiest way to fix it if it does anything at all. Run the fuel through if you are driving it, and take the air horn or filter off and spray in the carb cleaner with the engine running. If you don't notice a big difference, I would go ahead and get the carb rebuilt or replaced with a used one or new, whichever. Sometimes the cleaner will do the trick. Check it out.

Posted on Jun 03, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do you put the clutch fluid in a 1993 Isuzu Amigo

called bleeding
bleeds just like. all brakes do.
in fact all 5 ways work.
  1. gravity
  2. 2 man
  3. pressure bleed top
  4. reverse bleed bottom
  5. and vacuum bleed bottom
#4 wins on clutches, but 2man is classic.

Feb 12, 2017 | 1993 Isuzu Amigo

1 Answer

Error 444 1993 Isuzu amigo

seen where.???
  1. on the cluster, no way in 1993 ever.
  2. on the radio ? dial. or CD or ?head end, or newer audio systems installed. what brand, what model is it.
  3. on a scan tool ,not in 1993
  4. you went to autozoned and he yelled this over shoulder? run
  5. or its the flash codes from ECU and is 44 and not 444. yes?
  6. or?

Apr 12, 2015 | 1993 Isuzu Amigo

1 Answer

How do you convert an automatic transmision to a manual on a 99 amigo

I think you should have done more research before you started this project. The clutch wires you cant find may not exist on your Isuzu. Also the starter wont work without a signal from the clutch interlock switch. These probably also dont exist.

Sep 10, 2012 | 1998 Isuzu Amigo

2 Answers

1990 Isuzu amigo starter good battery good engine will not crank just one click any help

check you connection on battery and the wire that runs from battery to starter wiggle it while some one is trying to start the car.any luck let us know

Oct 26, 2010 | 1992 Isuzu Amigo

1 Answer

2000 V-6 Isuzu Amigo recent new battery recent new alternator new fan belt new pulley great for 6mos, now doesn't lights, nothing

have your battery tested and charged/replaced as neccessary. test your charging system for 13.5- 14.7 volts. i know they are fairly new but electrical componenets can fail in half a second. dont rely on them being new. check them anyways.

Dec 28, 2009 | 2000 Isuzu Amigo

1 Answer

Have 93 Amigo replaced O2 sensor but still will

check for a blocked catalytic convertor, disconect the exhaust from the manifold or the conection to the convertor and start run the vhicle and see if it makes a difference if so replace unit, if not, then check the IAC sensor and mass air sensor

Oct 28, 2009 | 1993 Isuzu Amigo

1 Answer

1993 Isuzu Amigo has low idle speed and slow excelleration, especially on hills, O2 light on, ant suggestions?

replace your o2 sensor(s) and check your catalitic converter it may be plugged

Aug 30, 2009 | 1993 Isuzu Amigo

1 Answer

Where is the water pump located on a 1993 isuzu amigo

it is on the front of the engine, the cooling fan is attached to it, do u have the new part?

May 30, 2009 | 1993 Isuzu Amigo

Not finding what you are looking for?
1993 Isuzu Amigo Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides