Question about 2003 Honda CR-V
Means your anti locking brake system is disable, when the ABS light is on means the ASB computer pick up a bad signal from one of your ABS sensor's, any auto parts place like autozone can do a free code reading, once you get the code get back with us here at FixYa so we can help you diag. your trouble code, also your brake will work fine it be like a car with out ABS, get it check out.
Posted on Jun 03, 2010
Abs warning light means that something is wrong with the abs system.. usually this is the abs sensor which needs to be replaced.. If when driving the car u find the brakes dont work as they used to its cause of this.. the abs sensor determines how fast and hard the brakes need to hold for a smooth stop..
in the fuse panel under the hood ,, locate and remove the abs fuse.. this will disable the abs system.. drive the car and you will see how the brakes hold differently,, (much faster and harder,, its like a manual braking system),, once you replace the abs sensor you will be fine and the light will go off..
Posted on Jun 03, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: ABS light
This light can Mean a Few Different Things. It could mean that the Brake Pads are in need of Replacement, The Brake Master Cylinder needs to be Replaced, It could even be Telling you that You were Bracking very Hard Earlier on. Like you would not Know! LOL If it does not go off and the Brake Pedal is ok and it will stop ok, Just Run into a Brake shop and have them take a Quick look and see if these things are OK. Please Rate my Solution, I need all the Help that I can Get! Thanks!
Posted on Jan 26, 2009
Could be as simple as low fluid level in the master cylinder. Check that first and then if it is not low or filling it and making a few starts and stops does not kill the light then stop by your local parts store and they will read your codes for free and tell you what the problem is. Free is good, bad brakes is bad, but hopefully it is just the fluid level.
Posted on Nov 13, 2009
Tips for a great answer:
Mar 10, 2015 | 2002 BMW 330i
Dec 27, 2012 | Saab 93 Cars & Trucks
On vehicles equipped with antilock brakes (ABS), a second warning light is provided to warn if a problem occurs within the ABS system. The ABS lamp comes on when the ignition is turned on for a bulb check, then goes out after the engine starts. If the ABS warning light remains on or comes on while driving, it indicates a fault has occurred in the ABS system.
What happens next depends on the nature of the fault. On most applications, the ABS system disables itself if the ABS warning light comes on and remains on.
Oct 24, 2012 | 1999 Ford Ranger SuperCab
Jul 04, 2012 | Hyundai Cars & Trucks
Jun 05, 2011 | Renault 181 Cars & Trucks
Feb 01, 2011 | Toyota Corolla Cars & Trucks
Apr 08, 2010 | 2001 Volkswagen Beetle
Nov 22, 2009 | Dodge Caravan Cars & Trucks
Aug 21, 2009 | 2003 Ford Expedition
May 29, 2009 | 1997 Chevrolet Malibu
2,147 people viewed this question
Usually answered in minutes!