Question about 2005 Chevrolet Impala

2 Answers

Hazard and turning signal problem.

I just need to find out if the two problems are connected to the same relay and where that relay might be.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

The flasher for both is located in the hazard switch it self, pull trim off around switch unplug and replace, part will be a dealer item only part place will not have this part.

Posted on Jun 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

CHECK PARK LAMP RELAY THE TURN SIGNAL CIRCUIT SHARE ITS CIRCUIT.PARK LAMP RELAY IS IN THE UNDER HOOD FUSE AND RELAY CENTER.

Posted on Jun 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turn signal relay 2007 Avalanche ltz


There is no turn signal relay or flasher , Computer controlled by the BCM - body control module .
Turn Signal/Hazard Lamps
When the turn signal switch is placed in either the left or right position, a ground signal is completed from the turn signal switch to the BCM. When the hazard flasher switch is activated, a ground signal is completed from the turn signal/hazard switch to the BCM. The BCM then sends an ON-OFF voltage signal through the fuses to the appropriate turn signal and side repeater (export only) lamps or to all of the turn signal fuses for hazard operation. The driver door switch and passenger door switch also receive voltage from the BCM turn signal supply voltage circuits for the mirror turn signals. The door switches have no function or control of the mirror turn signals other than a pass through connection for the circuits. The audio chime is also activated when the turn signals are ON. The instrument panel cluster (IPC) receives the signals to activate the turn signal indicators over the GMLAN serial data system. When the hazard switch is pressed, all turn signal lamps will flash including both IPC turn indicators.
This is something best left to a qualified repair shop that has a professional type scan tool . Could need new BCM , which would need programming . Scan tool would be able to check switch inputs for BCM .

May 22, 2016 | 2007 Chevrolet Avalanche LTZ

1 Answer

2008 envoy Denali right turn signal and right hazard quit. replaced relay worked for 20 minutes of driving then right turn and right hazard quit again??? LEFT SIDE IS FINE


Sounds like you have a wiring issue ! Maybe when you installed the turn / hazard relay you moved the wiring harness in such away that made it work. Grab the wiring harness an do the wiggle test an see if it works . Mite have lose connection where the relay plugs in, close the terminals a little bit. I don't know what you know about electrical systems on automobiles or I'd tell you to do a voltage drop test to find the problem . Need volt ohm meter an a wiring diagram to do this test. Electric Testing Techniques You Need to Know

Feb 28, 2015 | 2008 GMC Envoy Denali

1 Answer

I installed a 1987 monte carlo steering column in my 30 ford hot rod i need the color code of the wires so i can conect the directional signails up


H).l-blu wire connect to left front turn signal J).dk-blu wire connect to right front turn signals K).brown wire connect to hazard/flasher relay output L).purple wire conect to turn/flasher signal M). yellow wire connect to left rear stop hazard light N). dk-green wire connect to right rear stop/hazard light P) white wire connect to stop light swirch output

Jun 25, 2010 | Cars & Trucks

2 Answers

2002 chevrolet cavalier, my brake lights, front and rear turn signals and hazard lights are not working


Your Hazard switch is bad. There were a bunch that had faulty soldering connections, and would fail prematurely. This circuit also competes with the turn signals, and the brake lights. Replace the switch with an aftermarket replacement, and it should fix your issue.

Dec 20, 2009 | 2002 Chevrolet Cavalier Coupe

3 Answers

Turn signals wont work fuses are good?


the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

1 Answer

1989 Lincoln Town Car Turn Signal Relay location


Thats strange they should be on the fuse panel ! Are you sure !!!!

Aug 12, 2009 | 1989 Lincoln Town Car

2 Answers

Turn signals don't work


i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated

Nov 25, 2008 | 1989 GMC K1500

2 Answers

Hazard Lights working. Indicators will not operate/flash


The Hazard and turn signals share the same relay module located in the dashboard behind the hazard switch. Remove the trim by prying from the sides (Either side of the Cup holder drawer and Card drawer). Pry the hazard switch assembly out from the dashboard. The relay is part of the hazard switch assembly.

Unclip the wiring terminal from the relay. replace with appropriate relay. Part costs under $50.00 delivered from Import Parts Specialists.

Nov 02, 2008 | 2003 Audi A6

2 Answers

Hazard Flashers, turn signals and brake lights quit working


please check your flasher relay. it is normally a three prong relay box.


tnx 4 using fixya,

drcool

Sep 02, 2008 | 1996 Lincoln Town Car

Not finding what you are looking for?
2005 Chevrolet Impala Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...