Question about 1999 Daewoo Nubira

1 Answer

Can you recommend the strongest timing belt for the Daewoo 2.0L

Can you recommend the strongest or best manufactured timing belt replacement for the 2.0L engine found in the 2000 Daewoo Nubria CDX wagon with auto trans. Recommend best place to buy it also. Thanks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

I would purchase one from a Daewoo Dealer.

Posted on Jun 03, 2010

  • jewzyj
    jewzyj Mar 28, 2012

    what the same co- dealer that builds cars that last 40,000mi then explode good idea , the best timing belts out known to man are one' gates' and goodyear makes a crazy thick belt for cheap called gatorback belts all under 30$ chicks go to the stealership



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My 2002 vw cabreo does not idle very erratic it has the 2,0L gas

1) Ignition time is incorrect. Reset the ignition timing to the specification of manufacturer.
2) Test the ignition system. see the diagram attached. God bless you.


May 15, 2012 | Volkswagen Cars & Trucks

3 Answers

Do I need to replace timing belt on a 2001 Honda Accord that has 40,000 miles?

Most of the time you can wait until 100,000 miles to replace the timing belt. But there is no way to be sure, and maintenance recommendations vary. It is best to fall on the safe side. If you do not feel that you have the expertise to check the timing belt yourself, it is recommended that you have a professional take a look at it.

Jul 29, 2008 | Honda Accord Cars & Trucks

3 Answers

How to determine that the timing belt for toyota highlander needs to be replaced

Thanks for choosing FixYa and welcome. It is recommended to change the belt around 100,000 miles. You should be able to take off the front protective cover to check out the belt. Make sure it has all the teeth and it is not slipping. Make sure the ends are not tearing apart as well. If it breaks on you, not only are you stranded, it may cause engine damage as well.

Apr 22, 2011 | Toyota Highlander Cars & Trucks

1 Answer

Is there a maintainance need to replace timing belt on a mitsubishi colt after so many miles???

I usually recommend to people I do work for that its always best to follow the manufacturers recommendations but there are some that feel that if the belt looks fine with no cracks or tears then leave it on.But if you car is running rough then its very possible that the belt could have stretched.So the belt might look fine in appearance but in reality it could be stretched.Most recommend that it is between 60000 and 80000 miles.Be sure to read your owners manual for what mileage they recommend it be changed at.

Mar 06, 2011 | Mitsubishi Colt Cars & Trucks

1 Answer

Timing chain on 2003 Suzuki XLT when do you change it? I am at 137,00 miles right now.

Most manufactures recommend changing a timing belt at 100k but I've seen them go several hundred thousand miles and no problem. I've also seen them break under 100k. The best maintenance is preventative maintenance or fixing things before they become a problem. I would recommend replacing it if you have the means to do so as you will also be replacing the water pump which is driven off the timing belt (do them together)..

Jan 22, 2011 | 2003 Suzuki XL-7

1 Answer

How do I set the timing on a 2002 Daewoo nubria?

make sure you align all the marks on the gears that the timing belt runs on.

Jul 11, 2010 | 2002 Daewoo Nubira

1 Answer

When should timing belt be changed?

Hi there:
most manufactures call for timing belt/chains to be replaced approximately every 75,000 to 100,000 miles.
Timing belt replacement can be very difficult if you don't have much experience in that type of repair for the best step by step instructions it would be best too go and get a repair manual from your local parts distributor i would recommend getting a chilton repair manual.
hope this is helpful for you best of luck too you

May 27, 2010 | 2002 Oldsmobile Alero

2 Answers

If the timing belt breaks does this shear or bend the valves on a 2000 deawoo lanos?

All Daewoo Engines are interference fit Engines. Which means that if the timing belt rips while the engine is running the pistons will hit and bend the valves and you will have to get new valves and possibly a new cylinder head. Worst case scenario you will also have to get a new engine block if for some reason chunks or pieces of valve, piston or cylinder head damaged the cylinder bore and cracked the block while things were moving around. Daewoo Timing belts are recommended to be replaced at 60,000 miles but it is best to replace them before 60k as some people have had their timing belts break on them as soon as 61,000 miles.

Nov 27, 2009 | 2000 Daewoo Lanos

1 Answer


I found a few, most running over $100, this link has the equivalent tool costing much less. I 'll leave both links and you can choose. Best of luck on your repair.

May 09, 2009 | 2000 Daewoo Lanos

4 Answers

Daewoo Leganza 2000 timing belt broke

If the idler pulley, broke, with the car running, (I think is the most probable), There is no way to fix the car just replacing the timing belt and the idler pulley. This is an interference engine, that means if the timing belt or the idler pulley breaks, you need to replace the whole cylinder head, that's because the valves are bent. I just fix my daewoo, I tried first to just change the idler pulley and set up the time, but it did not work. I had to replace the whole head cylinder, timing belt and pulleys.

I got the information to set up the timing belt from a Library, The program is Mitchell on demand.


Aug 29, 2008 | 2000 Daewoo Leganza

Not finding what you are looking for?
1999 Daewoo Nubira Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides