Question about 1987 Plymouth Voyager

1 Answer

I have removed the alternator& water pump form

I have removed the alternator & water pump form a 1994 plymouth voyager some time ago and now have replacement parts..The problem is: I have forgotton how it goes back together...Is there a picture diagram available to show how the support brackets for the water pump and alternator are in this 3.8 6 cyl. motor?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 383 Answers

You can do some searching on web and library but chances are slim u find a diagram for that so u have 2 options

1. play with it and eventually figure it out (very time consuming and hair pulling involed)

2 . go to a junk yard and see how it is on a van or car

Posted on Jun 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Plymouth Grand Voyager (3.3L) dies while driving. Changed water pump, ignition switch, and battery. Most times have to get it jumped off, which usually works. Any ideas?


have the alternator bench tested for correct out put. Check the drive belt tension as the alternator may be slipping under load

Dec 12, 2013 | 1997 Plymouth Grand Voyager

1 Answer

1994 Voyager


Here's a link to your problem.

Jun 07, 2013 | 1994 Plymouth Voyager

1 Answer

Installing water pomp


Your water pump is operated y the timing belt, so therefore you have to remove the timing belt to replace the water pump and then retime the motor. If you don"t know how to time the motor you would be better off to take it to a mechanic.

Mar 12, 2011 | 1994 Plymouth Voyager

1 Answer

I have a 1992 Plymouth Voyager ,I have taken water pump off and all I have is AGS Thermostat & Water Pump Gasket sealer do I not need A gasket for the water pump


Its a good question, and some might say gasket sealer is ok. On the other hand gaskets are made to fill the area between the housing and the pump and I would recommend it and if you feel the need to use your sealer you can use it in combination with it. If you have any other questions please feel free to ask.

Aug 11, 2010 | 1994 Plymouth Voyager

1 Answer

Where can I find the map sensor in a 1994 plymouth voyager


For 1994 Plymouth Truck Voyager 2WD 3.0L MFI 6cyl the MAP Sensor is located under hood, passenger side, upper engine area, end of intake manifold cover, mounted next to alternator on engine.

Hope helps (remember rated this).

Jul 05, 2010 | 1994 Plymouth Voyager

1 Answer

How do I remove oil pump on 2000 Plymouth voyger


The oil pump removal procedure for Plymouth Voyager 2000.
A oil pump is usually located in the oil pan. If you want to change the oil pump and replace it with a new one, roll up your sleeves and get ready for some dirty work.
The procedure to remove oil pump is as follows:--
  • Drive your vehicle up onto ramps or lifts so you have room to work as you pull out the oil pump. You could also use a jack, but make sure you brace the front wheels so they don't roll. In addition, set the emergency break firmly into position so the car doesn't roll.
  • Remove the engine front cover then drain the engine oil and take out the oil pan. It is under the engine and looks like the bottom of the motor.
  • Unscrew the oil pump mounting bolts with a wrench and proceed to remove the oil pump itself by pulling it down and out of the engine. Avoid getting any contaminants into the oil pump assembly while removing.
The Water pump removal procedure for Plymouth Voyager 2000.
The water pump is the heart of the Plymouth Voyager's cooling system, circulating the coolant. When the water pump is faulty, it can cause serious damage to the engine of your Plymouth Voyager.
  • Disconnect the negative battery cable.Place a drain pan underneath the radiator. When the engine is cool, drain the cooling system from the radiator into the pan.
  • Remove the right inner splash shield and the accessory drive belts. Support the engine underneath and remove the right motor mount with the bracket.
  • Take off the front cover and remove the timing belt along with the timing belt idler pulley. Also remove the camshaft sprockets, the rear cover to the timing belt and the alternator with its bracket.
  • Loosen and remove the bolts to the water pump and remove it from the engine.Install the new water pump after inserting a new o-ring gasket. Tighten the bolts to 105-inch lbs. Make sure that the pump can move freely by rotating it by hand.
  • Replace all components in reverse order. Tighten the camshaft sprocket bolts to 75 foot pounds and the timing belt idler pulley to 45 foot pounds.
  • Refill the cooling system with coolant and reconnect the negative battery cable. Start the engine and check for leaks when it reaches normal operating temperatures.

Loud noises coming from the cooling system could be a sign that your water pump needs replacing. A leak in the coolant may also be an indicator. You can expect that a water pump will need to be changed every 70 to 100 thousand miles or so in a Plymouth Voyager vehicle.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Jun 13, 2010 | 2000 Plymouth Voyager

2 Answers

How do you set the timing on a Plymouth Voyager ? I have to repace a broken timing belt. I was also told to replace the water pump is that true.


It is recommended because if you have to change the water pump belt change since you have to remove it and you save work in the future as we recommend changing the camshaft seals and crankshaft as it saves time and money

Feb 03, 2010 | 1992 Plymouth Voyager

1 Answer

94 Plymouth Voyager Water Pump


thw water pump stuff you need is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280215d73

The heater stuff is here

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c15280216054

Hope this helps! good luck!

Sep 15, 2008 | 1994 Plymouth Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...