Question about 1994 Mercury Topaz

1 Answer

1994 Mercury Topaz Fender Removal

I have a 1994 Mercury Topaz GS 2 door, and in the past winter I slid into my wooden mailbox and dented the front drivers side fender and therefore need to remove it in order to pop the dent out... i am just not quite sure on how to remove the fender from the car? Unless you have another way of getting the small dent out of the fender without removal... thanx in advance

Posted by on

  • Anonymous Mar 28, 2014

    my front driver side fender on my 2008 Toyota Tacoma is dented. how do i remove it so i can pop the dents out?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,317 Answers

Harbor Freight and most local body shop supply stores should have a suction-cup type tool for pulling out dents. You maybe able to remove the inner fender well to get to the dent. To remove the fender, you'll need to remove the top fender bolts, the bolts that attach it to the header panel, and the bolts holding it on back by the door.

Posted on Jun 03, 2010

Testimonial: "Thanx i will definately try that root to save some time and money.."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a odd grinding Noise only when I'm driving this 2 door 1994 Mercury Topaz Car


check the wheel bearings for failure
check the disc rotors fir failure on the inside from brake pads worn out

Nov 20, 2015 | 1994 Mercury Topaz

1 Answer

Where is the horn location under hood of a 2007 mercury mountneer?


Remove the LH front fender splash shield !
Fender Splash Shield Removal and Installation
  1. Loosen the running board bolts and lower the running board to access the front fender moulding pin-type retainer.
    • To install, tighten to 23 Nm (17 lb-ft).
  1. Remove the lower pin-type retainer from the front fender moulding.
  1. Remove the 2 rear pin-type retainers from the front fender moulding.
  1. Position the front fender moulding aside and remove the splash shield lower screw.
    >
  1. Remove the front splash shield screws.
  1. Remove the front splash shield pin-type retainers.
  1. Remove the front splash shield.
  1. Remove the front fender splash shield.
  1. To install, reverse the removal procedure.

Mar 25, 2015 | 2007 Mercury Mountaineer

1 Answer

Removing the left front axle on a 1993 mercury topaz gs


They are held in the transmission with a snap clip. Take a small flathead screw driver and wedge it in between the axle and tranny and turn axle clock wis and counter clockwise and it will come out. When you put the new one in, you will hear it ;; snap;; in place

Jan 20, 2013 | 1993 Mercury Topaz

1 Answer

How do you unhook fuel lines on fuel rell on a 1991 Mercury Topaz?


need special fuel line removal tool set for ford feul line , can buy relatively cheap at a auto parts stor (napa, pep boys, etc)

Sep 09, 2010 | 1991 Mercury Topaz 4 Door

1 Answer

Firing order for a 89 topaz


For the 1989 Mercury Topaz 2.3L In-Line 4-Cylinder:

Firing Order:
1-3-4-2
Cylinders:
........(back).........
|...1...2...3...4...|
........(front)
Distributor:
....(back)
(+)...4
...............2
3
........1...(+)-screw
....(front)

Let me know if this helped...

May 12, 2010 | 1989 Mercury Topaz

1 Answer

I cannot locate my fuel pump shut off switch on my 1994 mercury topaz


I believe it should be in your passenger side kick panel next to the door

Sep 28, 2009 | 1994 Mercury Topaz

1 Answer

Aparently there are 2 fuse boexes in a 1990 mercury topaz i need to know where they BOTH are


The secret fuse box is under the hood on the driver side fender wall.Be careful there are spies everywhere trying to find this piece of high tech fuse concealment. :-)

Jun 23, 2009 | 1990 Mercury Topaz

1 Answer

Oil leaking in front of my engine above the oil filter. '92 mercury topaz GS, 2.3 4 cyl


possibly the oil pressure sending unit- looks like a small spark plug screwed into the engine with one wire going to it

May 30, 2009 | 1992 Mercury Topaz

1 Answer

Need stereo wiring codes for 1992 mercury topaz


1991-92 Mercury Topaz Stereo Wiring Constant 12V+ Green/Yellow Switched 12V+ Yellow/Black Ground Red/Black Illumination n/a Dimmer Blue/Red Antenna Right Front Front Speakers 6 1/2" Doors Left Front (+) Orange/Green Left Front (-) Black/White Right Front (+) White/Green Right Front (-) Black/White Rear Speakers 6" x 9" Rear Deck Left Rear (+) Pink/Green Left Rear (-) Pink/Blue Right Rear (+) Pink/Blue Right Rear (-) Green/Orange

Robert

Please take a moment to rate this solution thanks

Oct 08, 2008 | 1992 Mercury Topaz

Not finding what you are looking for?
1994 Mercury Topaz Logo

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...