Question about 1998 Chevrolet C3500

2 Answers

Need help with my 6.5l turbo diesel - 1998 Chevrolet C3500

Posted by on

  • alvincroeze3 Jun 03, 2010

    Jun 03, 2010 - ok this truck will not start have chk the fuel module ,have install 3 diffrent used diesel pump,crank sensor replace ,with a known good one,electical diesel pum have been replace ,no start in the moring untill now,no fuel is coming out of the diesel pump to the 8 injectors.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

What kind of problem do you have?

Posted on Jun 03, 2010

  • 28 more comments 
  • alvincroeze3 Jun 03, 2010


    Jun 03, 2010 - ok this truck will not start have chk the fuel module ,have install 3 diffrent used diesel pump,crank sensor replace ,with a known good one,electical diesel pum have been replace ,no start in the moring untill now,no fuel is coming out of the diesel pump to the 8 injectors.

  • alvincroeze3 Jun 03, 2010

    Hi do you need more info??

  • Clint Smock
    Clint Smock Jun 03, 2010

    You say you have fuel pressure to the injection pump but no fuel from the injection pump? You have replaced the injection pump and the pump controller on the drivers side of the pump?

  • alvincroeze3 Jun 03, 2010

    ok fuel is coming from the tank all the ay to the filter,than to the diesel pump,do you meant the drive module black box??

  • Clint Smock
    Clint Smock Jun 03, 2010

    I've had to replace a few injection pump modules on these. Black box screwed to the drivers side of the injection pump



  • alvincroeze3 Jun 03, 2010

    whe have 2 of them here and was test on a other truck and that truck start fine.

  • Clint Smock
    Clint Smock Jun 03, 2010

    Do you have a wiring diagram for the vehicle. Are you getting power from the ignition switch to the run circuit?

  • alvincroeze3 Jun 03, 2010

    no sir. can you help me with a website where to get one.did a small search on google,but no luck jet

  • alvincroeze3 Jun 03, 2010

    can you explain a littlebit more about the run circuit ,operation and diagnostic.

  • Clint Smock
    Clint Smock Jun 03, 2010

    I have one and I can post it but I don't know if you will be able to see it. I might just have to look at the diagram and help you. I might be able you email the diagram to you.

  • alvincroeze3 Jun 03, 2010

    ok can you sent it to this e-mail. alvincroeze313@hotmail.com, will chk also tomorrow if i can find a repair manual for this truck,if you can sent me the wiring diagram by mail, i will take a quick look on the truck now

  • Clint Smock
    Clint Smock Jun 03, 2010

    Do you have power on the ecm-1 fuse in the underhood fuse box with the key in the run and start positions?

  • alvincroeze3 Jun 03, 2010

    will chk that out now for you.

  • alvincroeze3 Jun 03, 2010

    result ok, power in ig and run position its a 20amp mini fuse

  • Clint Smock
    Clint Smock Jun 03, 2010

    Do don't have a computer scanner do you? Does the service engine soon light come on when you turn the key on?

  • alvincroeze3 Jun 03, 2010

    yes the light will come on,i have a cjs scanner @ the monent,and have retrive some dtc but after clearing the dtc and try to start or crank no other dtc have shown up jet,have chk also the rpm when cranking in the datalist and its stay to 0rpm but not sure if that is normall in cranking,the engine will start with insect killer spary but engine do not continu to idle on its own.

  • Clint Smock
    Clint Smock Jun 03, 2010

    Great, what codes did you have?

  • alvincroeze3 Jun 03, 2010

    i could not retrive any freeze frame data with the scanner that i have.

  • Clint Smock
    Clint Smock Jun 03, 2010

    You couldn't get the trouble codes either?

  • alvincroeze3 Jun 03, 2010

    Here are the code

    P-0238 turbo/supercharger boost sensor circuit.

    P-0335 crank shaft position sensor circuit a

    P-0370 Timing referance ,High resolution signal a

    P-1643 engine speed RPM out put circuit.



    al this dtc might have been record by the pcm when was chking and turning the engine with the crankshaft sensor connector disconected,?? what do you thingk,crank shaft sensor have been replace with a other usde one

  • alvincroeze3 Jun 03, 2010

    sorry the crank shaft sensor was not diconected ,when engine was cranking. only disconect to replace it.

  • Clint Smock
    Clint Smock Jun 03, 2010

    Did you have the boost/map sensor unplugged too? Sounds like you might have lost the 5 volt reference from the PCM that runs the crank sensor and the Boost sensor. With most scanners the rpm should read when cranking the engine over.

  • Clint Smock
    Clint Smock Jun 03, 2010

    Do you have a volt meter?

  • alvincroeze3 Jun 03, 2010

    going to chk if there is the 5v like you say to both sensors,but its getting to late for me ,how can we continu tomorow on this jop,will try to get a repair manual to,

  • Clint Smock
    Clint Smock Jun 03, 2010

    Yeah that sounds good, I'll be at work all day. But I check my email. You can call me if you want to. I live in central Illinois.

  • alvincroeze3 Jun 03, 2010

    chk for 5v on both sensor and its good,5v avalible ignition run position.

  • alvincroeze3 Jun 03, 2010

    ok can it get your pfone number to contact you tomorrow.thanks a lot.

  • Clint Smock
    Clint Smock Jun 03, 2010

    309-299-8783

  • Clint Smock
    Clint Smock Jun 03, 2010

    My name is Clint



  • alvincroeze3 Jun 03, 2010

    got it ,whats your name??

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

What kind of help do you need

please be specific about what problems you are having and what you have doe to resolve it so far

furthermore also identify your transmission and any aftermarket items you have installed


Sean

Posted on Jun 03, 2010

  • 3 more comments 
  • alvincroeze3 Jun 03, 2010

    ok this truck will not start have chk the fuel module ,have install 3 diffrent used diesel pump,crank sensor replace ,with a known good one,electical diesel pum have been replace ,no start in the moring untill now,no fuel is coming out of the diesel pump to the 8 injectors.

  • alvincroeze3 Jun 03, 2010

    no aftermarket parts install on the truck ,was driving fine untill now,

  • alvincroeze3 Jun 03, 2010

    hi you there iam doing this for the first time.

  • alvincroeze3 Jun 03, 2010

    Hi sir you there

  • Sean Reisdorf
    Sean Reisdorf Jun 03, 2010

    hello alvincroeze3

    first thing first
    You are NOT using a live chat so you have to post and wait
    Most of us have full-time jobs and work for FixYa part-time

    You can choose a live chat, but it costs a little more
    If that isn't fast enough you can always sign-up for phone support at an even higher cost

    Most people find the post section ok if they are not in a major hurry


    Let me know if you still need help
    address your questions with my name.... Sean



×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's your question?I am in need of the topbolts sequence and torque settings of a 2005 xlt intercooled turbo diesel. Can anyone please help me


go google and type in--- torque specifications for ( make ) 2005 turbo diesel head studs
there will be pages with the details and the sequence of tightening

Nov 01, 2015 | Cars & Trucks

1 Answer

F77 2.8 diesel non turbo.1989 model.require head bolt tensions,stages and sequence please


Search Results

    F77 2.8 diesel non turbo.1989 model.require head bolt - Fixya

    www.fixya.com/cars/t25792470-f77_2_8_diesel_non_turbo_1989
    Jul 22, 2015 - f77 2.8 diesel non turbo.1989 model.require head bolt tensions,stages and sequence please - Daihatsu Rocky question. ... Torque to yeild bolts need to be replaced whenever the head comes off.....Long bolts are 46 ft lbs. and ...

Jul 22, 2015 | Daihatsu Rocky Cars & Trucks

3 Answers

I got a tata 407 turbo but the performance is poor it also smokes black and the fuel is black can some please help


Best I can tell this is a diesel truck? I know diesel, but
depending on age could be injectors, possibly Diesel injection pump hopefully not. The fuel is black? Someone is putting old engine lubricating oil in the fuel tank. It will increase the problem of black smoke. It may also have a bad smell because of the engine oil. If the turbo is not spinning properly (high pitched whine) the bearings may be bad and it's not getting enough air into the engine. This would also explain the smoke problem. Take it to a Diesel specialist!

Mar 05, 2015 | Tata Cars & Trucks

1 Answer

I need a firing order diagram for a 2004 isuzu rodeo


which engine.????????
4 banger is 1,3,4,2 , on most, (non boxer engines)
the ECU dictates order, why worry that?
you plug the coils in wrong"?
try posted engine, size in car.

hummmm the list
2.3 L 4ZD1 I4
2.4 L C24SE I4 (GM, Aus)
2.4 L C24NE I4 (Euro)
2.6 L 4ZE1 I4
3.1 L LG6 V6 (GM)
3.2 L 6VD1/6VD1W V6
2.5 L 4JA1 diesel I4 (Cameo, TH)
2.8 L 4JB1-T turbo diesel I4
3.0 L 4JH1-T turbo diesel I4
3.1 L 4JG2 turbo diesel I4

Aug 11, 2014 | 2004 Isuzu Rodeo

1 Answer

What is the proper oil for the car 2005 CHEVROLET SILVERADO 2500 HD V8-400ci 6.6L DIESEL TURBO


It will be a diesel oil only, with a viscosity rating of 15w-30 or 20w-50 depending on the ambient temperature of your area. The brand is immaterial but it has to be diesel oil to have the ingredients needed to run a turbo. Oil used in a petrol engine will not be suitable for this application.

Jul 31, 2014 | 2005 Chevrolet Silverado 2500HD 2WD

3 Answers

Diesel engine problems


Is it a turbo diesel? It sounds like the turbo is shot. Black smoke and runs like **** a pretty sure signs.

Jul 04, 2012 | Renault Cars & Trucks

4 Answers

My 2006 Sprinter has over 30,000 miles and when going up long, steep slopes it slows down, but keeps running smooth. I did change the fuel filter recently and that did help but did not solve the problem. ...


YOU HAVE A AIR LEAK IN THE TURBO SYSTEM CK HOSE'S MY 2006 3500 SPLIT THE HOSE HIGH WHISTLING SOUND. LOW POWER / AND LIMP MODES TOO. ORDER THIS AND BINGO IF FIX IT . YES THE OLD TURBO RESONATOR HAD SPLIT TOO. I did not use the o-ring from the old part I found one 1 side down that fit tight around the new part. A loose o-ring is going to weak air too. Got mine on ebay.


star_red01.gif THE SPRINTER TURBO RESONATOR ELIMINATOR
For your late 2004 through early 2007, 2.7 liter 5 cylinder in-line turbo diesel engine, our billet aluminum SRE-06 Turbo Resonator Eliminator completely eliminates turbo resonator failures forever.
see_the_product01.gif

star_red01.gif The SPRINTER TURBO HOSE ADAPTORS FOR CRACKED HOSES
Completely eliminates turbo hoses cracking and blowing apart at the metal end.

For your 2002 through early 2007, 2.7 liter 5 Cyl. Inline engine, our ADAP-06 billet aluminum fitting with rounded ends, completely eliminates turbo intake hose from cracking and blowing apart at the metal end.
see_the_product01.gif

For your late 2007 through present, 3 liter V6 Turbo diesel engine, ADAP-09 billet aluminum fitting with rounded ends, completely eliminates turbo intake hose from cracking and blowing apart at the metal end.
see_the_product01.gif http://www.riordanco.com/our_products_catalog.htm

Oct 27, 2010 | Dodge Sprinter

2 Answers

My toyota 3C turbo diesel engine the turbo compressor is flooding of oil . I can.t trace where it is coming from That is why I am searching service manual for this turbo charger. 12ct


Hi,

If your turbo housing is getting flooded with oil the it can only come from the shaft seal on the inside of the turbo.

You will need to remove it and replace the shaft seal.

Jun 19, 2010 | Cars & Trucks

1 Answer

Do i need a turbo timer for an intercooled diesel engin..isuzu...


Yes it pays to have a Turbo timer or let it run for 3 minutes after an outing.
An Intercooler is usually fitted to turbo charged engines.It cools the air entering the engine making it denser,Thats why cars go really well on frosty mornings after they reach running temp.
Hope this helps.

Aug 02, 2009 | 1994 Isuzu Trooper

Not finding what you are looking for?
1998 Chevrolet C3500 Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...