Question about 1995 Chevrolet Monte Carlo

1 Answer

How to glue 97 monte rear view mirrow back on windshield, no screw to get the little metal hanger off rest of mirror,

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 40 Answers

The only thing holding the bracket on is a screw. If the mirror were on the windshield, look up from under it, there will be a hole. Inside is a set screw, it requires a small allen wrench. Instructions come with the glue for attatching it. You can purchase the glue kit at any auto parts store. Before you clean the area, take a felt marker and mark a larger than the bracket " + " where the old one was on the outside of the windshield so you can center the bracket.

Posted on Jun 03, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Interior rear view mirror fell off my 98 BMW 540i


There is a small set screw that holds the mirror to the small metal button. Most vehicles use a small Phillips screw but some use a Hex Key Wrench (Allen Wrench) type screw. Slide the mirror off the button. Make sure not to remove the glue before you put the button back on. Trace around the glue with a grease pencil on the outside of the windshield before you remove it. So you know exactly where to replace the button. You can buy a Rear View Mirror Adhesive Kit for around five dollars.

Jan 10, 2012 | 1998 BMW 5 Series

2 Answers

With the heat my rear view mirror came off of my window. I just want to glue the silver piece back on how do I remove it


there may be a small screw or if not, its a metal clip, you may need to pry the clip up and slide the metal piece out. the auto parts store sells special glue just for the mirror.

Aug 30, 2011 | 1996 Chevrolet Monte Carlo

1 Answer

How do I reglue a rear view mirror 97 monte carlo


Most auto parts stores sell a kit specifically designed for that. I'm pretty sure they are around $10.
When using the kit, clean the area very well with ammonia then alcohol before using the primer for the glue. Before you scrape off the old glue, make a mark for reference on the outside of the windshield with crayon.

Jun 20, 2011 | 1997 Chevrolet Monte Carlo

2 Answers

To repair a displaced rear view mirror. Does the flat base needs a glue? Does the mirror detaches from the metal base? If so, how do I detach it. Please help


mirror is screwed to metal plate w/screw or allen wrench. Glue go to metal plate then to windshield. Let it sit overnight or longer, then attach mirror. NOTE::: MAKE SURE THE METAL PAD IS GLUED IN CORRECT DIRECTION - UPSIDE DOWN DOES NOT WORK - (trust me I know - I did it)

Mar 03, 2011 | BMW 530 Cars & Trucks

1 Answer

My rear view mirror fell off and the little metal piece is still in the mirror. How do I get the metal piece out of it?


there should be a set screw that comes loose with an allen wrench. Get a mirror kit from the parts store to glue it back on the windshield. After it dries, reattach the mirror.

Oct 20, 2010 | 1996 Ford Explorer

1 Answer

Seperate rearview mirror from plate both came off


f

Replacing the rear view mirror on a Ford Explorer is easy. The only obstacle you might encounter is fear of breaking the glued metal plate off the windshield. Do not sweat it. You can buy glues at the auto parts store to reattach the mirror to the windshield (Difficulty: Moderately Easy).

Instructions:
  1. Tap gently at the base of the mirror where it slides on over the metal plate glued to the windshield and pull upward. Some rear view mirrors have a small Allen screw that tightens the base of the rear view mirror to the metal plate. Disconnect the electrical plugs if your rear view mirror has them.
  2. Pull the rear view mirror clear of the metal plate. Clean around the metal plate glued to the windshield. If the metal plate has come off because of harsh weather or from hammering too hard at it, reattach it with glue designed for this job.
  3. Clean the area where you will be attaching the metal plate on the windshield. Apply the glue evenly on the surface of the metal plate that will go against the window. Be sure to clean and scrape off all the old glue before applying the new glue. Gently push the metal plate against the windshield in the spot you wanted it and hold tight for five minutes.
  4. Wait a day before putting the base of the mirror or replacement rear view mirror onto the metal plate. Do not force the base over the plate. Forcing it will likely dislodge it again. Press firmly until it will not slide along the grooves of the metal plate. Reconnect your electrical plugs and tighten the Allen screw if your new mirror has one. Adjust the mirror according to your safe viewing preference

Hope help with this (remember rated this help). Good luck.

Mar 12, 2010 | 1999 Ford Explorer

1 Answer

97 maxima rear view mirror


go to auto parts store they sell a repair kit w/ an adhesive for about $1.50 that will glue the mirror back to windshield! remove old glue with a razor blade and clean 1st

Dec 26, 2008 | 1997 Nissan Maxima

2 Answers

Rearview mirror fell off windshield


there is a small allenwrench bolt in the mirror back out the bolt and install then tighten back up

Dec 05, 2008 | 1997 Chevrolet Lumina

1 Answer

How do I re-install the rear view mirror?


If it goes directly attached to the windshield, you will have to remove a metal piece of metal from the mirror base. This will have to be glued with epoxy glue to the windshield holding it it with tape overnight. After this you can put the mirror back.

Jul 05, 2008 | 1988 Subaru GL-10

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...