Question about 2003 Ford Windstar

2 Answers

NO POWER TO MY OBD PLUG CANT BE EMMISH TESTED DONT KNOW IF IT IS A FUSE OR RELAY

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 775 Answers

Yes, there is a fuse. if you don't have an owners manual, you can dowload one at ford.com for free. it will have the location of the fuses listed under ROAD SIDE EMERGENCIES.

Posted on Jun 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,927 Answers

It is most likely the ecm,this is the problem on the emissions test failure most likely.

Posted on Jun 03, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pump relay diagram


To start with not getting gas so you changed spark ????what spark.
Go to fuse box find pump relay and get it tested if ok then check feed at relay if ok go to pump check power with test light first and then check power to fuse box.[ if you havent already ].

May 22, 2014 | 1997 Chrysler Sebring

1 Answer

Dont know which fuse operates fuel pump


) Unplug the main relay and then turn the key from off to ON(II).

2) Use a jumper wire or paperclip to jump terminal 1 to terminal 7 in the main relay plug. Does the fuel pump run?

3) Now use the jumper wire or paperclip to jump terminal 5 to terminal 7 in the main relay plug. Does the fuel pump run?


picture_6583.jpg

Jan 05, 2014 | 1994 Honda Civic

1 Answer

What fuse number for the diagnosis plug to get the check light engine


fuse number 24 is a 30 amp fuse goes to pcm relay and fuse number 30 the 30 amp fuse to ignition to pcm power diode.if check light is working your pcm has power but you could have short in the dlc connector terminal where you scanner adapter goes.your scanner suppose power up from the dlc terminal for obd 2 system the obd 1 you connect to cigarette light or use battery hook up cables that come with scanner make sure you are using correct adapter.

Nov 15, 2011 | 2000 Ford Expedition

1 Answer

1991 chevy 1500 no power to radio fuse


if you got a spark when you touch it to the side (which is the ground) the wire is a power source that should go to the terminal at the back of the lighter. there is no relay for this circuit so change the new fuse it's blown and check for burnt wires.

Apr 25, 2010 | 1991 Chevrolet C1500

1 Answer

Can't read codes with code reader


you most likley have a blown fuse. the fuse for the connector and cig lighter are usually on the same circuit . if you have a owner manuel check and see which fuse is for the obd/cig lighter. if you dont have a manuel then check every fuse in the box and see if you find a blown one. the plug whare the scanner connects is what powers the scanner so if you cant find a blown fuse then you know youre not getting power to the plug for some reason.

Apr 24, 2009 | 2004 Ford F150

1 Answer

Nissan vanette not starting from cold


it sounds like there is a short in the glow plug suply circut if they dont work when installed into the engine you might try wiggling the connectors

Dec 01, 2008 | 2002 Nissan Altima

Not finding what you are looking for?
2003 Ford Windstar Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...