Question about 2003 Pontiac Vibe
You remove the bolts holding the rad hose on top of the engine and pull the thermostat out and replace it then reattach the hose
Posted on Jun 03, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
we had the computer code p2716 on our 2005 pontiac vibe -shift solenoid. gm says to replace the pcm before you do anything else. we tried this and it works.
Posted on Apr 12, 2009
Nope, you just need the change the heater resistor pack. This is the part that controls the fan speed and it is fairly common that it burns up and only works on high. Usually the resistor pack is located behind the glove box in the cabin of the vehicule, either in the heater motor assembly or somewhere in a vent duct. The second option is the most common, as most companies prefer putting it in the duct instead of in the moto assembly cause it makes it faster to change, and therefore costs them less man hours to change it if it breaks under warranty.
Posted on Jul 31, 2009
will have to remove the door panel unless it has a small piece in the upper corner by the mirror. should have three 10mm nuts that hold it on.
Posted on Aug 27, 2009
Testimonial: "Thanx for your very quick response!!!"
Tips for a great answer:
Feb 26, 2015 | 2005 Pontiac Vibe
Aug 09, 2014 | 2005 Pontiac Vibe
Apr 15, 2012 | 2007 Pontiac Vibe
Oct 13, 2010 | Pontiac Vibe Cars & Trucks
Jul 05, 2010 | 2005 Pontiac Vibe
Aug 27, 2009 | 2005 Pontiac Vibe
Aug 14, 2009 | 2005 Pontiac Vibe
Aug 05, 2009 | 2005 Pontiac Vibe
Feb 24, 2009 | 2008 Pontiac Vibe
759 people viewed this question
Usually answered in minutes!