Question about 1995 Honda Passport

Open Question

Trying to set the timing marks on 95 passport there are on gears where do you angal the marks on the gears when you put the belt on

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: How to get the timing belt off a 97 Honda Passport?

Ok this is pretty simple first of all this vehicle has a hydraulic tensioner so will nee to loose the two bolts that holds the hyraulic tenisor and remove tensioner completely and belt will become loose and can be removed. Its recommended that you change this tensioner when you do a timing belt job at about 60,00 miles. However if you choose to re-use tension it can be compressed(pushed back in with a bench vise and can be held in place for installion by a very skinny allen key of a wire type brake clip or something of that sort. Here is a diagram of your timing marks, conatct if you need more help Good Luck and thanks for using
FIX YA
http://www.2carpros.com/car_repair_information/tec_info/1997/honda/passport/1997_honda_passport_timing_belt_diagram_marks.htm

Posted on Jan 14, 2009

  • 24 Answers

SOURCE: timing 97 passport

you need to re-do you timing belt and make sure the cam is aligned, there will be an arrow on the cam and another arrow for you to line up to, its called TDC (top dead center)..once thats lined up you can put the belt back and your timing should be better

Posted on Dec 03, 2009

ftw1952
  • 10319 Answers

SOURCE: how do you set the timing on my 95 honda passport.

the cam and crank gears have dimples on the teeth to align up facing each other

Posted on Mar 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Timing belt setting


line up the marks on crank shaft gear arrow to arrow, the front cam gear the mark goes to the middle on the rear cam gear the mark goes one notch below front gear mark they line up when the tension is put on belt.

Aug 17, 2014 | 2005 Chrysler PT Cruiser

2 Answers

Wont start after timing belt and water pump replaced


Sounds like your timing marks aren't set correctly. Make sure you have spark and fuel. (Injector pulse)

Mar 03, 2011 | 1995 Honda Passport

1 Answer

Pleaser tell me where are the timing marks for my 1995 honda passport


if you have the 4 cyl they are located on the belt cover and the mark is on the drive pully, if you have a 6 cyl. the marks are on the block behind the belt cover, but the timing is set at TDC and is not adjustable.

Apr 08, 2010 | 1995 Honda Passport

1 Answer

Timing belt broke on a 95 ford ranger.new belt


you have to line up the two marks on the gears and set the tension to the correct setting. then check the marks again. trial and error. i just did my timing belt on my ranger haha

Feb 18, 2010 | 1995 Ford Ranger Supercab

2 Answers

Changed the water pump on my 1997 passport & now the timing is off.


I assume you are talking about valve timing not igntion timing. If that is the case your water pump maybe run by the timing belt. If it is you would need to completely disassemble the timing cover and set the number one cylinder to TDC (top dead center) on the Compression stroke not the exhaust stroke. Once you do that line the timing marks up on cam gears with marks on the side of the head. Then install a new timing belt and tensioner. It is a good idea to always change the pump and belt together. I would suggest buying a manual for your specific vehicle for specific torque specs and exact locations of components and procedures.

Dec 03, 2009 | 1997 Honda Passport

2 Answers

1995 Honda Passport timing alginment 3.2 ltr 6VD1 engine


The crankshaft should have the timing mark on the crank pulley (Notch in the outer edge of the pulley near the keyway) It should align with the timing mark on the oil pump. (With the keway turned to about the 3 O'clock position.)

Align the marks on the camshaft timing pulleys with the corresponding dots on the front plate.

If you are installing a new belt, it should have 2 solid white lines printed on it that you would align with the timing marks on the cams and a dotted white line to align with the timing mark on the crank.

It makes a difference which way you put the belt on. (Which edge faces the front of the engine.) Most, but not all brands of belts have arrows and the word "FRONT" on them to tell you which edge of the belt shoud face the front of the motor. If there is no mark to tell you which edge is front, the letters on the belt must be able to be read correctly as viewed from the front of the vehicle.

Oct 30, 2009 | Honda Passport Cars & Trucks

1 Answer

Need timing belt mark diagram for 95 corolla 4afe


malibluert: YOUR IN LUCK! This series engine is simple and the references aren't hard to find. READY???????
IF you are just trying to reset the belt at the top and have not remover the crank pulley, bring the crank around to Top dead center on the # 1 cylinder,. It will read Zero degrees on the timing mark scale.
Up top, look at the cam gear closely You will see that there are 5 spokes which support the actual gear. Look closer and you will see that one of these spokes has a small hole in it about 3/4th of the way towards the outside of the gear. Position the gear to where that hole is at 12:00 PM. NOW, if you look thorough the hole, you should should see a small notch that the hole should be centered on. If not, move the gear until you can look through the hole and the notch falls dead center. At that point in time, you have the crank ant camshaft in perfect time with each other.
When you put the belt on, make sure that the side which is slack is the tensioner side. You should be able to slip the belt on, matching the teeth with the teeth on the gears to where one side is fairly tight and you can not roll the cam counter clockwise.
IF you are replacing the belt, you have the crank pulley off and you position the woodruff key straight up at 12:00 PM and the procedures are all the same other than that. when you set the tension. A good rule of thumb is to find the longest span of belt, and with your thumb and forefinger twist the belt. if it twists to 45 degrees toward the block, it's perfect. Any more or less, needs to be reset.
I hope my answer suffices. A picture wouldn't be any more clear.
Let me know how you did.
NOTE: This engine does NOT bend valves when a timing belt fails.

Apr 19, 2009 | 1995 Toyota Corolla

2 Answers

I cant get my 95 honda civic on timings the motor is 16v 1.5 l woundering if you could help


put the number one cylinder at top dead center and line up the timing marks on the cam gear and put the belt on

Apr 11, 2009 | 1995 Honda Civic

2 Answers

Belts


Timing belt has marks on it that refer to the cam marks and the crank gear. Looking at the engine from the front, the timing belt should drape over the two cam gears, with 40 cogs between them on the belt. The timing belt should have 42 or 43? cogs between the driver cam mark and the mark on the crank gear. The way i've installed mine is to put the belt on the driver side cam and crank, and then put it on the passenger side cam. You'll need to lock the tensioner clockwise about 70-80 degrees to get enough clearance to install the belt.

Aug 15, 2008 | 1995 Nissan Pathfinder

Not finding what you are looking for?
1995 Honda Passport Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...