Question about 2000 Chevrolet S-10

1 Answer

2000 chevy s10 starter clicks - 2000 Chevrolet S-10

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 834 Answers

The cause of that could be;

1. A low battery, check it to make sure that the battery does have 12 volts. There might be a draw on the battery or the alternator may have quit charging the battery, see if the vehicle will jump-start and if it does start then check the voltage at the battery and it should be reading 14 to 16 volts if the alternator is charging the battery properly, but an internally shorted battery can cause similar conditions, and if the battery casing is bulged out then the battery is most likely not any good..

2. Low voltage/amperage to the starter motor because of a bad connection at the starter or the battery. Check the battery cables for loose cables or corroded connections and make sure that the battery connection are clean and they are not corroded.

3. The starter motor brushes are worn out and the starter motor will not turn, if you can tap on the rear of the starter housing while someone is holding the key in the start position sometimes the starter motor will turn the engine over, if that is the case then you should replace the starter.

4. A faulty ignition switch.

5. The engine has siezed up, I have seen it happen before but we do want to think about that, however it is another remote possibility.

Posted on Jun 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a vacuum hose diagram for 2000 Chevy S10 2.2 from the top of the Intake Manifold


https://www.bing.com/images/search?q=i+need+a+vacuum+hose+diagram+for+2000+chevy+s10+2.2+from+the+top+of+the+intake+manifold&qpvt=i+need+a+vacuum+hose+diagram+for+2000+chevy+s10+2.2+from+the+top+of+the+intake+manifold

Sep 04, 2017 | Cars & Trucks

1 Answer

Chevy s10 2000 not charging battery just replace alternator


I would check the fuseable links and cables from the alternator and the starter. You should be getting 14volts from the back of the alternator to the starter - battery.
The battery light should be on too.

Aug 22, 2012 | Chevrolet S 10 Cars & Trucks

1 Answer

Starter 2000 chevy s10 diagram


Heres a wiring diagram for your 2000 s10 blazer, hope this is helpful. good day

Oct 20, 2011 | 2000 Chevrolet S-10

1 Answer

2000 Chevy s10 manual changed starter still won't start the starter is spinning but the engine won't turn over.


Do you have the correct starter and is it grinding, this sounds like a bad flywheel or wrong starter or even a bad one. look at teeth of flywheel and see if they are damaged. good day

Jun 19, 2011 | 2000 Chevrolet S-10

1 Answer

Where is the starter on a chevy s10 1998


http://www.ehow.com/how_6114322_replace-starter-chevy-s10.html Just replaced on my 96 a month ago this should help Mine was under the driver side of the truck

Nov 05, 2010 | 1998 Chevrolet S-10 Pickup

2 Answers

88 chevy s10 fuel pump working. carburetor


did you try changing the fuel filter? it could be completely clogged

Oct 28, 2009 | 2000 Chevrolet S-10

2 Answers

How do i remove the starter from my s10 chevy truck 2000


remove your positive lead from the battery. Climb under the vehicle and remove the 3 wires attached to the starter, remove the 2 bolts holding the starter in place, install new starter in reverse order.

Sep 16, 2009 | 2000 Chevrolet S-10

1 Answer

2000 chevy s10 starting problem


there is a solinoid that enguages the starter it is stuck tap the round cylinder that is atached to the top of the starter it should disenguage the solinoid if not try to hit it harder. dont beat it up though. it also may need a new starter.

Jul 17, 2009 | 2000 Chevrolet S-10

2 Answers

Chevy S10 Pickup Starter. Removed the two bolts


Just changed a starter in a 94 S10 4x4. The only way to remove the starter was to take the passenger side exhaust manifold off and bring the starter out that way. Installation the same in reverse. Hope this helps. Don

Mar 14, 2009 | 1998 Chevrolet S-10 Pickup

1 Answer

2000 chevy s10


jump it or charge the battery and then if that dont work then its a starter problem

Oct 03, 2008 | 2000 Chevrolet S-10

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...